Even with the fixes mentioned previously, grub fails with an OHCI controller (NEC ohci/ehci
chipset on a PCI card). It seems to successfully initialise the controller, but fails to enumerate the ports. The same output is seen with a mouse attached as with no devices attached. grub> insmod ohci ../bus/usb/ohci.c:180: class=0x0c 0x03 interface 0x10 base=0xe2102000 ../bus/usb/ohci.c:184: OHCI revision=0x10 ../bus/usb/ohci.c:195: OHCI reset ../bus/usb/ohci.c:213: OHCI HCCA ../bus/usb/ohci.c:219: OHCI enable: 0x02 ../bus/usb/ohci.c:180: class=0x0c 0x03 interface 0x10 base=0xe2103000 ../bus/usb/ohci.c:184: OHCI revision=0x10 ../bus/usb/ohci.c:195: OHCI reset ../bus/usb/ohci.c:213: OHCI HCCA ../bus/usb/ohci.c:219: OHCI enable: 0x02 ../bus/usb/ohci.c:622: root hub ports=2 ../bus/usb/ohci.c:604: detect_dev status=0x00 ../bus/usb/ohci.c:604: detect_dev status=0x00 ../bus/usb/ohci.c:622: root hub ports=3 ../bus/usb/ohci.c:604: detect_dev status=0x00 ../bus/usb/ohci.c:604: detect_dev status=0x00 ../bus/usb/ohci.c:604: detect_dev status=0x00 _______________________________________________ Grub-devel mailing list Grub-devel@gnu.org http://lists.gnu.org/mailman/listinfo/grub-devel
