Alon Bar-Lev wrote:
On 5/2/08, Vesa Jääskeläinen <[EMAIL PROTECTED]> wrote:
Hi Alon,
Actually I meant that I have used it before in vmware desktop and it worked
fine. So I was wondering when it got broken and how did exactly you try it
out to reproduce the issue here. Because grub 2 "has to" work in vmware too
:)
Eg. tell that you ran this and this. And then did that.
I run:
grub-install /dev/hda
Nothing special... on boot I grub starts and goes into rescue prompt.
There is no proper documentation... So I don't know what else I can do.
I think I have a proper grub.cfg but I don't think I got to the stage
it actually can be read. As ls command command shows empty output.
I just built current CVS and tried it with my old scripts. Didn't
install it to /dev/hda as cannot test it without reinstall ;)... but
made core.img with modules: chain fat biosdisk. Installed it to floppy
and then booted that floppy in vmware desktop 5.5.4.
Even graphics mode seem to work.
I can provide this test floppy if you want to test it out?
I think lspci might also need some device database. So if it cannot load it
may fail. But lets first tackle this vmware problem :)
But this is basic... the module is loaded... I understand that the
disk may not be detected, but I expect command to be available.
insmod pci
insmod lspci
lspci
_______________________________________________
Grub-devel mailing list
Grub-devel@gnu.org
http://lists.gnu.org/mailman/listinfo/grub-devel
