>
> --
> Bean
>
>
>
>
>
> ------------------------------
>
> Message: 8
> Date: Wed, 27 Jun 2007 10:18:09 +0800
> From: Bean <[EMAIL PROTECTED]>
> Subject: Re: GRUB 2 does not show new kernel :(
> To: The development of GRUB 2 <grub-devel@gnu.org>
> Message-ID: <[EMAIL PROTECTED]>
> Content-Type: text/plain; charset=us-ascii
>
> On Wed, Jun 27, 2007 at 01:18:41AM +0530, shirish wrote:
> > Hi all,
> > I thought long & hard before making this post. I tried all
> > the avenues , the #GRUB channel on IRC, the forums at ubuntuforums (
> > 136 views at this point in time but no answers :( ) . hence made long
> > posts about the issue at
> > http://ubuntuforums.org/showthread.php?t=484856
> >
> > If anybody knows what I need to do or look for , please lemme know.
Message: 3
Date: Wed, 27 Jun 2007 14:39:35 +0800
From: Bean <[EMAIL PROTECTED]>
Subject: Re: GRUB 2 does not show new kernel :(
To: The development of GRUB 2 <grub-devel@gnu.org>
Message-ID: <[EMAIL PROTECTED]>
Content-Type: text/plain; charset=us-ascii
On Wed, Jun 27, 2007 at 11:55:07AM +0530, shirish wrote:
> Hi all,
> Mr. Bean (chuckles knowing a different bean :) ) , first of all
> thank you for your time. You are right as far as unifont.pff is
> concerned. I just did a search and saw that unifont is not installed.
> Have installed it now. But still the same issue is there.
>
> btw I have two hard disks :-
>
> [EMAIL PROTECTED]:~$ sudo fdisk -l
> [sudo] password for shirish:
>
> Disk /dev/sda: 160.0 GB, 160041885696 bytes
> 255 heads, 63 sectors/track, 19457 cylinders
> Units = cylinders of 16065 * 512 = 8225280 bytes
>
> Device Boot Start End Blocks Id System
> /dev/sda1 * 1 1912 15358108+ 7 HPFS/NTFS
> /dev/sda2 1913 19457 140930212+ f W95 Ext'd (LBA)
> /dev/sda5 1913 6083 33503526 7 HPFS/NTFS
> /dev/sda6 6084 10254 33503526 7 HPFS/NTFS
> /dev/sda7 10255 14425 33503526 7 HPFS/NTFS
> /dev/sda8 14426 18596 33503526 7 HPFS/NTFS
> /dev/sda9 18597 19457 6915951 7 HPFS/NTFS
>
> Disk /dev/sdb: 80.0 GB, 80060424192 bytes
> 255 heads, 63 sectors/track, 9733 cylinders
> Units = cylinders of 16065 * 512 = 8225280 bytes
>
> Device Boot Start End Blocks Id System
> /dev/sdb1 * 1 1216 9767488+ 83 Linux
> /dev/sdb2 1217 9483 66404677+ 83 Linux
> /dev/sdb3 9484 9733 2008125 82 Linux swap / Solaris
>
> Another thing, is not written in /boot/grub/grub.cfg not to alter stuff ?
>
> #
> # DO NOT EDIT THIS FILE
> #
> # It is automaticaly generated by /usr/sbin/update-grub using
> templates from /etc/grub.d
> # and settings from /etc/default/grub
> #
>
> Please lemme know what is to be done & will try accordingly.
>
I recommend that you remove these lines:
font (hd1,1)/usr/share/grub/unifont.pff
set gfxmode=640x480
insmod gfxterm
insmod vbe
terminal gfxterm
You will enter text mode, but this is not an issue since you're not using
any non ascii characters.
--
Bean
Hi Mr. Bean,
I tried your way but ran into another problem straightaway. When I
tried to save the resulting file it gives me this error :-
Could not save the file /boot/grub/grub.cfg.
You are trying to save the file on a read-only disk. Please check that
you typed the location correctly and try again.
Lemme say at the outset, this was with sudo
sudo gedit /boot/grub/grub.cfg
To check if its something to do with my hdd partitioning or something
I tried to make a file a .txt file in / using sudo & that was
successful.
The only conclusion I can come to is there seems to be some kind of
write-protection put in place (like in floppy disks) or something
which needs to be unprotected otherwise the change cannot happen. Of
course I do have the option of doing the same from windows but unsure
if the text encoding might change or something. Preferably within
linux.
Another dirty solution which somebody recommended was :-
1) open and edit the Grub menu list with "sudo gedit /boot/grub/menu.list",
2) comment out four lines pertaining to Grub2,
3) copy the ten lines referring to 2.6.22-6 kernel and paste this just
below the Grub2 lines,
4) you will now have two entries that will boot that kernel so you
must edit the lines you just pasted and change the 2.6.22-6 to read
2.6.22-7,
5) save the file and reboot.
As always all comments, suggestions, flames welcome :)
--
Shirish Agarwal
This email is licensed under http://creativecommons.org/licenses/by-nc/3.0/
065C 6D79 A68C E7EA 52B3 8D70 950D 53FB 729A 8B17
_______________________________________________
Grub-devel mailing list
Grub-devel@gnu.org
http://lists.gnu.org/mailman/listinfo/grub-devel
