OK...so here's the scoop. All Graylog Servers in use are built from the OVA...all version 2.13
Graylog Server 1 - Sits at our remote office. Collects Windows Events for the site. It has a series of streams setup. Each stream is using a GELF TCP port 12203 output to my main office Graylog Server 2 - Sits at main office. It has a Gelf TCP input for 12203 to receive streams from remote office. Trying to send the stream through the internet over TLS. My firewall at main office has 12203 open and pointing to graylog server 2 Issue: If I leave TLS off, then the system works great. If I turn TLS on for the Input side (Server 2), and click the Verify TLS on the client side(server1) (like I have done in my test lab), then the Server2 doesn't receive anything on the input. I see traffic in the firewall over 12203 Logs on servers are showing no errors (though admittedly...I may not be looking in the right area) I assume I have not setup TLS correctly and the docs are a bit vague on that Any insight is appreciated Thanks TP On Wednesday, February 15, 2017 at 4:00:28 PM UTC-6, Tom Powers wrote: > > Hello, > > If I'm trying to troubleshoot why an output from a stream , being > forwarded to another graylog server, and the stream populates but the > receiving server shows nothing, which logs on the graylog boxes would I > check to see if I have an output or an input problem? > > Thanks > > TP > -- You received this message because you are subscribed to the Google Groups "Graylog Users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/graylog2/54ce3680-8daf-4a98-9c60-6843e685b460%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
