Yes? The question is a bit confusing. jcp copies from host1 filesystem -> over the network -> (jsrv running on) host2 filesystem,
and while (for testing mostly) you can leave off the host: prefix on both giver and taker, to copy things from local disk over the TCP/UDP network stack, and back to the same host's local storage -- this is going to be wildly less efficient than using tar or cp to do local disk copies. On Friday, March 28, 2025 at 6:24:30 PM UTC G wrote: is it able to use a local storage as backup? Thanks On Thursday, March 20, 2025 at 10:04:45 PM UTC-7 Jason E. Aten wrote: I've open sourced jcp, my rsync-like file transfer library and CLI. By using Go's fabulous multicore support, jcp can do diff-only filesystem syncs up to 3x faster than rsync (which is a single threaded C program). It uses a parallelized version of the FastCDC algorithm with a Gear table to ship only the changes, even in binaries. https://github.com/glycerine/jcp >From the README: This project (jcp) was written to harden and polish my RPC system, https://github.com/glycerine/rpc25519 , whose high-performance and novel Peer/Circuit/Fragment paradigm is featured here. In this evolution of RPC, peers communicate fragments of infinite data streams over any number of persistent circuits. Since the roles are peer-to-peer rather than client-server, any peer can run the code for any service (as here, in the jcp case, either end can give or take a stream of filesystem updates). Enjoy. - Jason -- You received this message because you are subscribed to the Google Groups "golang-nuts" group. To unsubscribe from this group and stop receiving emails from it, send an email to golang-nuts+unsubscr...@googlegroups.com. To view this discussion visit https://groups.google.com/d/msgid/golang-nuts/d35b7c18-a475-4b8b-bcc2-7a8d479f4ab6n%40googlegroups.com.
