Jelle de Jong wrote:
Jelle de Jong wrote:
This message contains the following attachment(s):
debug-ccid-cardreader.txt
Hello everybody,
Thank you for all your work on gnupg. I got a few issues with my
smartcard system, it does not work anymore.
I attached some debug info.
Hopefully somebody can help me.
Thanks in advance,
Jelle
http://filebin.ca/eyrxrq/smarcard-debug.txt
I am 100% sure the PIN is correct, I had the same problem a few months
ago could not solve it. I tried again this week, and it was working fine
again, and the next day the same problem again...
I don't now what is wrong but i need to sign a package but cant do it
anymore... somebody that ca help me? What the is wrong with my card reader?
Thank in advance,
Jelle
Does anybody uses a smartcard reader? I am using a
ID 04e6:5115 SCM Microsystems, Inc. SCR335 SmartCard Reader
On debian sid, is something special required to get the device working?
like custom udev rules? or special local settings?
I would really like to get the device working again... Does somebody
else encountered the above problem before?
Thanks in advance,
Jelle
sudo lsusb -vvv -d 04e6:5115
Bus 002 Device 002: ID 04e6:5115 SCM Microsystems, Inc. SCR335 SmartCard Reader
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 16
idVendor 0x04e6 SCM Microsystems, Inc.
idProduct 0x5115 SCR335 SmartCard Reader
bcdDevice 5.18
iManufacturer 1 SCM Microsystems Inc.
iProduct 2 SCR33x USB Smart Card Reader
iSerial 5 21120618201041
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 93
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 3 CCID Class
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 11 Chip/SmartCard
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 4 CCID Interface
ChipCard Interface Descriptor:
bLength 54
bDescriptorType 33
bcdCCID 1.00
nMaxSlotIndex 0
bVoltageSupport 1 5.0V
dwProtocols 3 T=0 T=1
dwDefaultClock 4000
dwMaxiumumClock 12000
bNumClockSupported 0
dwDataRate 9600 bps
dwMaxDataRate 307200 bps
bNumDataRatesSupp. 0
dwMaxIFSD 252
dwSyncProtocols 00000000
dwMechanical 00000000
dwFeatures 000100BA
Auto configuration based on ATR
Auto voltage selection
Auto clock change
Auto baud rate change
Auto PPS made by CCID
TPDU level exchange
dwMaxCCIDMsgLen 263
bClassGetResponse echo
bClassEnvelope echo
wlcdLayout none
bPINSupport 0
bMaxCCIDBusySlots 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 16
Device Status: 0x0000
(Bus Powered)
_______________________________________________
Gnupg-users mailing list
Gnupg-users@gnupg.org
http://lists.gnupg.org/mailman/listinfo/gnupg-users
