Werner Koch a écrit : > On Fri, 29 Jun 2007 11:38, [EMAIL PROTECTED] said: > >> Visibly, purging pcscd does not solve the problem. Concerning >> permissions, I guess I have some work to do: > > Indeed. That is your problem. Use lsusb to figure out where the SCR335 > is attached and the manually update the ownership for testing. The > HOWTO has hints on how to install the hotplug stuff.
I read the hotplug stuff was deprecated, and that udev should be used instead. The output of lsusb -v concerning the smart card reader follows. My main problem is that I do not really understand how udev works. I understood there was lots of renaming involved. And with all these renamings, I do not really know how to make ownership changes. I'd really love to find a good document on how udev works. In particular with debian. Thank you. Guillaume Yziquel. > Bus 003 Device 003: ID 04e6:5115 SCM Microsystems, Inc. SCR335 SmartCard > Reader > Device Descriptor: > bLength 18 > bDescriptorType 1 > bcdUSB 2.00 > bDeviceClass 0 (Defined at Interface level) > bDeviceSubClass 0 > bDeviceProtocol 0 > bMaxPacketSize0 16 > idVendor 0x04e6 SCM Microsystems, Inc. > idProduct 0x5115 SCR335 SmartCard Reader > bcdDevice 5.18 > iManufacturer 1 SCM Microsystems Inc. > iProduct 2 SCR33x USB Smart Card Reader > iSerial 5 21120706318555 > bNumConfigurations 1 > Configuration Descriptor: > bLength 9 > bDescriptorType 2 > wTotalLength 93 > bNumInterfaces 1 > bConfigurationValue 1 > iConfiguration 3 CCID Class > bmAttributes 0xa0 > (Bus Powered) > Remote Wakeup > MaxPower 100mA > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 0 > bAlternateSetting 0 > bNumEndpoints 3 > bInterfaceClass 11 Chip/SmartCard > bInterfaceSubClass 0 > bInterfaceProtocol 0 > iInterface 4 CCID Interface > ChipCard Interface Descriptor: > bLength 54 > bDescriptorType 33 > bcdCCID 1.00 > nMaxSlotIndex 0 > bVoltageSupport 1 5.0V > dwProtocols 3 T=0 T=1 > dwDefaultClock 4000 > dwMaxiumumClock 12000 > bNumClockSupported 0 > dwDataRate 9600 bps > dwMaxDataRate 307200 bps > bNumDataRatesSupp. 0 > dwMaxIFSD 252 > dwSyncProtocols 00000000 > dwMechanical 00000000 > dwFeatures 000100BA > Auto configuration based on ATR > Auto voltage selection > Auto clock change > Auto baud rate change > Auto PPS made by CCID > TPDU level exchange > dwMaxCCIDMsgLen 263 > bClassGetResponse echo > bClassEnvelope echo > wlcdLayout none > bPINSupport 0 > bMaxCCIDBusySlots 1 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x01 EP 1 OUT > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0040 1x 64 bytes > bInterval 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x82 EP 2 IN > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0040 1x 64 bytes > bInterval 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x83 EP 3 IN > bmAttributes 3 > Transfer Type Interrupt > Synch Type None > Usage Type Data > wMaxPacketSize 0x0010 1x 16 bytes > bInterval 16 > Device Status: 0x0000 > (Bus Powered) _______________________________________________ Gnupg-users mailing list Gnupg-users@gnupg.org http://lists.gnupg.org/mailman/listinfo/gnupg-users
