This is the right question. I don't see a run of make sudo make install
If you don't run these successfully, nothing will appear in /usr/local. Note make install is run via sudo. On a typical linux system ordinary users are not allowed to write into /usr/local unless they have administrator privileges and invoke those. That's what "sudo" does. Regards, Geert Op dinsdag 20 november 2018 19:54:03 CET schreef Maf. King: > Hi, > > daft question - did you do a make install? > > I've never compiled GC, and I'm not up with cmake so maybe you don't have > to, but make uninstall failed and I didn't see make install? > > sorry if I'm up the wrong path... > > Maf. > > On Tuesday, 20 November 2018 18:38:26 GMT Joe Peters wrote: > > Hi; > > I am a bit of a noob so hopefully this is an easy answer. I was having > > trouble getting online quotes to work in gnucash so I decided to try and > > build it from source and see if that fixed the issue. Going through the > > guides I believe I managed to do so but I cannot find the program in my > > /usr/local as shown below. My initial compile did not work (shown below) > > but I fixed the missing library (libsecret-1-dev) and then got a build > > with > > no apparent errors. > > > > For reference, below is the listing of; > > > > * Failed attempt to build gnucash > > * My attempt to uninstall > > * Successful build of gnucash? > > * Listing of /usr/local > > > > So my question, I hope someone can answer, is did I build the application > > properly and where is the application? > > > > michelle@michelle-Lenovo-IdeaPad-Y570:~/Applications/gnucash-3.3/build$ > > cmake -DCMAKE_INSTALL_PREFIX=/usr/local -DWITH_PYTHON=ON ../ -- The C > > compiler identification is GNU 7.3.0 > > -- The CXX compiler identification is GNU 7.3.0 > > -- Check for working C compiler: /usr/bin/cc > > -- Check for working C compiler: /usr/bin/cc -- works > > -- Detecting C compiler ABI info > > -- Detecting C compiler ABI info - done > > -- Detecting C compile features > > -- Detecting C compile features - done > > -- Check for working CXX compiler: /usr/bin/c++ > > -- Check for working CXX compiler: /usr/bin/c++ -- works > > -- Detecting CXX compiler ABI info > > -- Detecting CXX compiler ABI info - done > > -- Detecting CXX compile features > > -- Detecting CXX compile features - done > > -- Found PkgConfig: /usr/bin/pkg-config (found version "0.29.1") > > -- Checking for module 'glib-2.0>=2.40' > > -- Found glib-2.0, version 2.56.3 > > -- Checking for module 'gio-2.0' > > -- Found gio-2.0, version 2.56.3 > > -- Checking for module 'gobject-2.0>=2.20' > > -- Found gobject-2.0, version 2.56.3 > > -- Checking for module 'gmodule-2.0>=2.20' > > -- Found gmodule-2.0, version 2.56.3 > > -- Checking for module 'gthread-2.0>=2.20' > > -- Found gthread-2.0, version 2.56.3 > > -- Checking for module 'libxml-2.0>=2.7.0' > > -- Found libxml-2.0, version 2.9.4 > > -- Checking for module 'libxslt' > > -- Found libxslt, version 1.1.29 > > -- Checking for module 'webkit2gtk-4.0' > > -- Found webkit2gtk-4.0, version 2.22.2 > > -- Checking for module 'gtk+-3.0>=3.10.0' > > -- Found gtk+-3.0, version 3.22.30 > > -- Checking for module 'zlib' > > -- Found zlib, version 1.2.11 > > -- Found Gettext: /usr/bin/msgmerge (found suitable version "0.19.8.1", > > minimum required is "0.19.6") -- Using guile-2.0.x > > -- Using guile SRFI-64 > > -- Checking for module 'gwenhywfar' > > -- Found gwenhywfar, version 4.20.0 > > -- Checking for module 'aqbanking' > > -- Found aqbanking, version 5.7.8 > > -- Checking for module 'ktoblzcheck' > > -- Found ktoblzcheck, version 1.49 > > -- Checking for module 'gwengui-gtk3' > > -- Found gwengui-gtk3, version 4.20.0 > > -- Checking for module 'libofx' > > -- Found libofx, version 0.9.12 > > -- Performing Test HAVE_OFX_BUG_39 > > -- Performing Test HAVE_OFX_BUG_39 - Failed > > -- Found LibXslt: xslt;xml2 (found version "1.1.29") > > -- Found PythonInterp: /usr/bin/python3 (found suitable version "3.6.7", > > minimum required is "3") -- Found PythonLibs: > > /usr/lib/x86_64-linux-gnu/libpython3.6m.so (found suitable version > > "3.6.7", > > minimum required is "3") -- Found Perl: /usr/bin/perl (found version > > "5.26.1") > > -- Checking for module 'icu-uc' > > -- Found icu-uc, version 60.2 > > -- Checking for module 'icu-i18n' > > -- Found icu-i18n, version 60.2 > > -- Checking for module 'libsecret-1>=0.18' > > -- No package 'libsecret-1' found > > -- Performing Test have_stringop_truncation > > -- Performing Test have_stringop_truncation - Failed > > -- Checking for GTEST > > -- Looking for pthread.h > > -- Looking for pthread.h - found > > -- Looking for pthread_create > > -- Looking for pthread_create - not found > > -- Check if compiler accepts -pthread > > -- Check if compiler accepts -pthread - no > > -- Looking for pthread_create in pthreads > > -- Looking for pthread_create in pthreads - not found > > -- Looking for pthread_create in pthread > > -- Looking for pthread_create in pthread - found > > -- Found Threads: TRUE > > -- Checking for GMOCK > > -- Looking for include file dirent.h > > -- Looking for include file dirent.h - found > > -- Looking for include file dlfcn.h > > -- Looking for include file dlfcn.h - found > > -- Looking for include file glob.h > > -- Looking for include file glob.h - found > > -- Looking for include file inttypes.h > > -- Looking for include file inttypes.h - found > > -- Looking for include file limits.h > > -- Looking for include file limits.h - found > > -- Looking for include file locale.h > > -- Looking for include file locale.h - found > > -- Looking for include file memory.h > > -- Looking for include file memory.h - found > > -- Looking for include file stdint.h > > -- Looking for include file stdint.h - found > > -- Looking for include file stdlib.h > > -- Looking for include file stdlib.h - found > > -- Looking for include file string.h > > -- Looking for include file string.h - found > > -- Looking for include file strings.h > > -- Looking for include file strings.h - found > > -- Looking for include file sys/stat.h > > -- Looking for include file sys/stat.h - found > > -- Looking for include file sys/time.h > > -- Looking for include file sys/time.h - found > > -- Looking for include file sys/times.h > > -- Looking for include file sys/times.h - found > > -- Looking for include file sys/types.h > > -- Looking for include file sys/types.h - found > > -- Looking for include file sys/wait.h > > -- Looking for include file sys/wait.h - found > > -- Looking for include file unistd.h > > -- Looking for include file unistd.h - found > > -- Looking for include file utmp.h > > -- Looking for include file utmp.h - found > > -- Looking for include file wctype.h > > -- Looking for include file wctype.h - found > > -- Check if the system is big endian > > -- Searching 16 bit integer > > -- Looking for stddef.h > > -- Looking for stddef.h - found > > -- Check size of unsigned short > > -- Check size of unsigned short - done > > -- Using unsigned short > > -- Check if the system is big endian - little endian > > -- Performing Test have_mod_mask > > -- Performing Test have_mod_mask - Success > > -- Configuring done > > -- Generating done > > -- Build files have been written to: > > /home/michelle/Applications/gnucash-3.3/build > > > > > > michelle@michelle-Lenovo-IdeaPad-Y570:~/Applications/gnucash-3.3/build$ > > make uninstall Scanning dependencies of target uninstall > > > > CMake Error at cmake_uninstall.cmake:4 (message): > > Cannot find install manifest: > > /home/michelle/Applications/gnucash-3.3/build/install_manifest.txt > > > > CMakeFiles/uninstall.dir/build.make:57: recipe for target > > 'CMakeFiles/uninstall' failed make[3]: *** [CMakeFiles/uninstall] Error 1 > > CMakeFiles/Makefile2:249: recipe for target 'CMakeFiles/uninstall.dir/all' > > failed make[2]: *** [CMakeFiles/uninstall.dir/all] Error 2 > > CMakeFiles/Makefile2:256: recipe for target > > 'CMakeFiles/uninstall.dir/rule' > > failed make[1]: *** [CMakeFiles/uninstall.dir/rule] Error 2 > > Makefile:236: recipe for target 'uninstall' failed > > make: *** [uninstall] Error 2 > > > > > > Thought I should try uninstall, which gave these errors, but then I > > thought > > if it did not build properly I probably did not need to uninstall. > > > > > > michelle@michelle-Lenovo-IdeaPad-Y570:~/Applications/gnucash-3.3/build$ > > cmake -DCMAKE_INSTALL_PREFIX=/usr/local -DWITH_PYTHON=ON ../ -- Using > > guile-2.0.x > > -- Using guile SRFI-64 > > -- Checking for module 'libsecret-1>=0.18' > > -- Found libsecret-1, version 0.18.6 > > -- Checking for GTEST > > -- Checking for GMOCK > > -- Performing Test have_mod_mask > > -- Performing Test have_mod_mask - Success > > -- Configuring done > > -- Generating done > > -- Build files have been written to: > > /home/michelle/Applications/gnucash-3.3/build > > > > > > listing my /usr/local directories > > > > michelle@michelle-Lenovo-IdeaPad-Y570:~/Applications$ ls /usr/local/* > > /usr/local/bin: > > apt dm_date dm_zdump gnome-help highlight mint-sha256sum search > > yelp > > > > /usr/local/etc: > > > > /usr/local/games: > > > > /usr/local/include: > > > > /usr/local/lib: > > python2.7 python3.6 x86_64-linux-gnu > > > > /usr/local/man: > > man1 man3 > > > > /usr/local/sbin: > > > > /usr/local/share: > > ca-certificates emacs fonts man perl sgml texmf xml > > > > /usr/local/src: > > > > > > > > Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows > > 10 > > > > _______________________________________________ > > gnucash-user mailing list > > gnucash-user@gnucash.org > > To update your subscription preferences or to unsubscribe: > > https://lists.gnucash.org/mailman/listinfo/gnucash-user > > If you are using Nabble or Gmane, please see > > https://wiki.gnucash.org/wiki/Mailing_Lists for more information. ----- > > Please remember to CC this list on all your replies. > > You can do this by using Reply-To-List or Reply-All. _______________________________________________ gnucash-user mailing list gnucash-user@gnucash.org To update your subscription preferences or to unsubscribe: https://lists.gnucash.org/mailman/listinfo/gnucash-user If you are using Nabble or Gmane, please see https://wiki.gnucash.org/wiki/Mailing_Lists for more information. ----- Please remember to CC this list on all your replies. You can do this by using Reply-To-List or Reply-All.
