Well done, we have a new builder :) The Transaction Report also had CSV output enabled (and also enables original-currency csv output), so, go ahead try break it :)
On Wed, 15 May 2019 at 03:35, Maf. King <m...@chilwell.net> wrote: > Gents, thanks! > > Cmake, make, make install all flawless. happily running > > Version: 3.5 > Build ID: git 2.6.17b-4197-gbeef587e6+(2019-05-12) > > will test the VAT report in the next few days (but not tomorrow as I've > got > meetings all day). So far so good, in that it produces sensible CSV > output on > the test file. > > Will use real accounts data and compare with previous VAT periods. > > Maf. > > > > On Tuesday, 14 May 2019 17:59:37 BST John Ralls wrote: > > Maf, > > > > There are instructions for enough git in the wiki, linked from the > > Developers_Source_Code section I gave you earlier. > > > > Regards, > > John Ralls > > > > > On May 14, 2019, at 9:37 AM, Maf. King <m...@chilwell.net> wrote: > > > > > > Ok, understood. > > > > > > I actually downloaded a zip, not a tarball, which I thought sligthly > odd, > > > but that's what the green download button gave... > > > > > > /me goes off to learn some git. just enough to be dangerous <wink> > > > > > > thanks chaps, > > > > > > will report back in due course. > > > > > > Maf. > > > > > > On Tuesday, 14 May 2019 15:38:22 BST John Ralls wrote: > > >> Maf, you need to delete your source directory and clone the > repository. > > >> See > > >> https://wiki.gnucash.org/wiki/GnuCash_Sources#Developers_Source_Code > > >> > > >> This failure is not at all odd. Building from a Github-generated > tarball > > >> is > > >> guaranteed to fail because it's not pre-swigged and our buildsystem > only > > >> invokes swig if it detects that it's using a git clone. We should > change > > >> the build so that it detects the absence of the swigged source files > and > > >> either sets up to run swig or fails with an intelligible error that > one > > >> is > > >> trying to build in a way that's not supported. I think the former > makes > > >> more sense. > > >> > > >> Regards, > > >> John Ralls > > >> > > >>> On May 14, 2019, at 6:49 AM, Geert Janssens < > geert.gnuc...@kobaltwit.be> > > >>> wrote: > > >>> > > >>> Hmm, that's odd. And your source directory is a git clone ? Or did > you > > >>> download the tarball from git ? > > >>> > > >>> Regards, > > >>> > > >>> Geert > > >>> > > >>> Op dinsdag 14 mei 2019 10:25:03 CEST schreef Maf. King: > > >>>> On Tuesday, 14 May 2019 09:18:02 BST Maf. King wrote: > > >>>>> Geert, > > >>>>> > > >>>>> No Problem. > > >>>>> > > >>>>> swig was not installed. (suse build-deps error?) > > >>>>> > > >>>>> have installed it and cmake is running at the moment...will report > > >>>>> back > > >>>> > > >>>> cmake failed again - i think identically, but haven't looked > closely. > > >>>> > > >>>> there are files that it is looking for that are not in the source > tree. > > >>>> > > >>>> cmake second run output: > > >>>> > > >>>> maf@janus:~/src/build-gc-vat> rm -rf * > > >>>> maf@janus:~/src/build-gc-vat> cmake > > >>>> -DCMAKE_INSTALL_PREFIX=$HOME/opt/gnucash- vat > > >>>> ../gnucash-maint-csv-export/ > > >>>> -- The C compiler identification is GNU 7.4.0 > > >>>> -- The CXX compiler identification is GNU 7.4.0 > > >>>> -- Check for working C compiler: /usr/bin/cc > > >>>> -- Check for working C compiler: /usr/bin/cc -- works > > >>>> -- Detecting C compiler ABI info > > >>>> -- Detecting C compiler ABI info - done > > >>>> -- Detecting C compile features > > >>>> -- Detecting C compile features - done > > >>>> -- Check for working CXX compiler: /usr/bin/c++ > > >>>> -- Check for working CXX compiler: /usr/bin/c++ -- works > > >>>> -- Detecting CXX compiler ABI info > > >>>> -- Detecting CXX compiler ABI info - done > > >>>> -- Detecting CXX compile features > > >>>> -- Detecting CXX compile features - done > > >>>> -- Found PkgConfig: /usr/bin/pkg-config (found version "0.29.2") > > >>>> -- Checking for module 'glib-2.0>=2.40' > > >>>> -- Found glib-2.0, version 2.54.3 > > >>>> -- Checking for module 'gio-2.0' > > >>>> -- Found gio-2.0, version 2.54.3 > > >>>> -- Checking for module 'gobject-2.0>=2.20' > > >>>> -- Found gobject-2.0, version 2.54.3 > > >>>> -- Checking for module 'gmodule-2.0>=2.20' > > >>>> -- Found gmodule-2.0, version 2.54.3 > > >>>> -- Checking for module 'gthread-2.0>=2.20' > > >>>> -- Found gthread-2.0, version 2.54.3 > > >>>> -- Checking for module 'libxml-2.0>=2.7.0' > > >>>> -- Found libxml-2.0, version 2.9.7 > > >>>> -- Checking for module 'libxslt' > > >>>> -- Found libxslt, version 1.1.32 > > >>>> -- Checking for module 'webkit2gtk-4.0' > > >>>> -- Found webkit2gtk-4.0, version 2.24.1 > > >>>> -- Checking for module 'gtk+-3.0>=3.10.0' > > >>>> -- Found gtk+-3.0, version 3.22.30 > > >>>> -- Checking for module 'zlib' > > >>>> -- Found zlib, version 1.2.11 > > >>>> -- Found Gettext: /usr/bin/msgmerge (found suitable version > "0.19.8.1", > > >>>> minimum required is "0.19.6") > > >>>> -- Using guile-2.0.x > > >>>> -- Using guile SRFI-64 > > >>>> -- Checking for module 'gwenhywfar>=4.9.99' > > >>>> -- Found gwenhywfar, version 4.18.0 > > >>>> -- Checking for module 'aqbanking>=5.3.4' > > >>>> -- Found aqbanking, version 5.7.8 > > >>>> -- Checking for module 'gwengui-gtk3' > > >>>> -- No package 'gwengui-gtk3' found > > >>>> -- Checking for module 'libofx' > > >>>> -- Found libofx, version 0.9.12 > > >>>> -- Performing Test HAVE_OFX_BUG_39 > > >>>> -- Performing Test HAVE_OFX_BUG_39 - Failed > > >>>> -- Found LibXslt: xslt;xml2;m;xml2 (found version "1.1.32") > > >>>> -- Found Perl: /usr/bin/perl (found version "5.26.1") > > >>>> -- Checking for module 'icu-uc' > > >>>> -- Found icu-uc, version 60.2 > > >>>> -- Checking for module 'icu-i18n' > > >>>> -- Found icu-i18n, version 60.2 > > >>>> -- Checking for module 'libsecret-1>=0.18' > > >>>> -- Found libsecret-1, version 0.18.5 > > >>>> -- Performing Test have_stringop_truncation > > >>>> -- Performing Test have_stringop_truncation - Failed > > >>>> -- Checking for GTEST > > >>>> -- Looking for pthread.h > > >>>> -- Looking for pthread.h - found > > >>>> -- Looking for pthread_create > > >>>> -- Looking for pthread_create - not found > > >>>> -- Check if compiler accepts -pthread > > >>>> -- Check if compiler accepts -pthread - no > > >>>> -- Looking for pthread_create in pthreads > > >>>> -- Looking for pthread_create in pthreads - not found > > >>>> -- Looking for pthread_create in pthread > > >>>> -- Looking for pthread_create in pthread - found > > >>>> -- Found Threads: TRUE > > >>>> -- Checking for GMOCK > > >>>> -- Looking for include file dirent.h > > >>>> -- Looking for include file dirent.h - found > > >>>> -- Looking for include file dlfcn.h > > >>>> -- Looking for include file dlfcn.h - found > > >>>> -- Looking for include file glob.h > > >>>> -- Looking for include file glob.h - found > > >>>> -- Looking for include file inttypes.h > > >>>> -- Looking for include file inttypes.h - found > > >>>> -- Looking for include file limits.h > > >>>> -- Looking for include file limits.h - found > > >>>> -- Looking for include file locale.h > > >>>> -- Looking for include file locale.h - found > > >>>> -- Looking for include file memory.h > > >>>> -- Looking for include file memory.h - found > > >>>> -- Looking for include file stdint.h > > >>>> -- Looking for include file stdint.h - found > > >>>> -- Looking for include file stdlib.h > > >>>> -- Looking for include file stdlib.h - found > > >>>> -- Looking for include file string.h > > >>>> -- Looking for include file string.h - found > > >>>> -- Looking for include file strings.h > > >>>> -- Looking for include file strings.h - found > > >>>> -- Looking for include file sys/stat.h > > >>>> -- Looking for include file sys/stat.h - found > > >>>> -- Looking for include file sys/time.h > > >>>> -- Looking for include file sys/time.h - found > > >>>> -- Looking for include file sys/times.h > > >>>> -- Looking for include file sys/times.h - found > > >>>> -- Looking for include file sys/types.h > > >>>> -- Looking for include file sys/types.h - found > > >>>> -- Looking for include file sys/wait.h > > >>>> -- Looking for include file sys/wait.h - found > > >>>> -- Looking for include file unistd.h > > >>>> -- Looking for include file unistd.h - found > > >>>> -- Looking for include file utmp.h > > >>>> -- Looking for include file utmp.h - found > > >>>> -- Looking for include file wctype.h > > >>>> -- Looking for include file wctype.h - found > > >>>> -- Check if the system is big endian > > >>>> -- Searching 16 bit integer > > >>>> -- Looking for stddef.h > > >>>> -- Looking for stddef.h - found > > >>>> -- Check size of unsigned short > > >>>> -- Check size of unsigned short - done > > >>>> -- Using unsigned short > > >>>> -- Check if the system is big endian - little endian > > >>>> -- Performing Test have_mod_mask > > >>>> -- Performing Test have_mod_mask - Success > > >>>> -- Configuring done > > >>>> > > >>>> CMake Error at common/test-core/CMakeLists.txt:43 (add_library): > > >>>> > > >>>> Cannot find source file: > > >>>> > /home/maf/src/gnucash-maint-csv-export/common/test-core/swig-unittest > > >>>> - > > >>>> > > >>>> support-guile.c > > >>>> > > >>>> Tried extensions .c .C .c++ .cc .cpp .cxx .m .M .mm .h .hh .h++ .hm > > >>>> .hpp > > >>>> .hxx .in .txx > > >>>> > > >>>> CMake Error at libgnucash/app-utils/CMakeLists.txt:94 (add_library): > > >>>> > > >>>> Cannot find source file: > > >>>> > /home/maf/src/gnucash-maint-csv-export/libgnucash/app-utils/swig-app- > > >>>> > > >>>> utils-guile.c > > >>>> > > >>>> Tried extensions .c .C .c++ .cc .cpp .cxx .m .M .mm .h .hh .h++ .hm > > >>>> .hpp > > >>>> .hxx .in .txx > > >>>> > > >>>> CMake Error at libgnucash/core-utils/CMakeLists.txt:130 > (add_library): > > >>>> > > >>>> Cannot find source file: > > >>>> > /home/maf/src/gnucash-maint-csv-export/libgnucash/core-utils/swig-cor > > >>>> e > > >>>> - > > >>>> > > >>>> utils-guile.c > > >>>> > > >>>> Tried extensions .c .C .c++ .cc .cpp .cxx .m .M .mm .h .hh .h++ .hm > > >>>> .hpp > > >>>> .hxx .in .txx > > >>>> > > >>>> CMake Error at libgnucash/engine/CMakeLists.txt:225 (add_library): > > >>>> > > >>>> Cannot find source file: > > >>>> > /home/maf/src/gnucash-maint-csv-export/libgnucash/engine/swig-engine. > > >>>> c > > >>>> > > >>>> Tried extensions .c .C .c++ .cc .cpp .cxx .m .M .mm .h .hh .h++ .hm > > >>>> .hpp > > >>>> .hxx .in .txx > > >>>> > > >>>> CMake Error at libgnucash/gnc-module/CMakeLists.txt:21 > (add_library): > > >>>> > > >>>> Cannot find source file: > > >>>> > /home/maf/src/gnucash-maint-csv-export/libgnucash/gnc-module/swig-gnc > > >>>> - > > >>>> > > >>>> module.c > > >>>> > > >>>> Tried extensions .c .C .c++ .cc .cpp .cxx .m .M .mm .h .hh .h++ .hm > > >>>> .hpp > > >>>> .hxx .in .txx > > >>>> > > >>>> CMake Error at gnucash/gnome/CMakeLists.txt:126 (add_library): > > >>>> > > >>>> Cannot find source file: > > >>>> /home/maf/src/gnucash-maint-csv-export/gnucash/gnome/swig-gnome.c > > >>>> > > >>>> Tried extensions .c .C .c++ .cc .cpp .cxx .m .M .mm .h .hh .h++ .hm > > >>>> .hpp > > >>>> .hxx .in .txx > > >>>> > > >>>> CMake Error at gnucash/gnome-utils/CMakeLists.txt:206 (add_library): > > >>>> > > >>>> Cannot find source file: > > >>>> > /home/maf/src/gnucash-maint-csv-export/gnucash/gnome-utils/swig-gnome > > >>>> - > > >>>> > > >>>> utils.c > > >>>> > > >>>> Tried extensions .c .C .c++ .cc .cpp .cxx .m .M .mm .h .hh .h++ .hm > > >>>> .hpp > > >>>> .hxx .in .txx > > >>>> > > >>>> CMake Error at gnucash/html/CMakeLists.txt:37 (add_library): > > >>>> > > >>>> Cannot find source file: > > >>>> > /home/maf/src/gnucash-maint-csv-export/gnucash/html/swig-gnc-html.c > > >>>> > > >>>> Tried extensions .c .C .c++ .cc .cpp .cxx .m .M .mm .h .hh .h++ .hm > > >>>> .hpp > > >>>> .hxx .in .txx > > >>>> > > >>>> CMake Error at gnucash/report/report-gnome/CMakeLists.txt:26 > > > > > > (add_library): > > >>>> Cannot find source file: > > >>>> > /home/maf/src/gnucash-maint-csv-export/gnucash/report/report-gnome/sw > > >>>> i > > >>>> g- > > >>>> > > >>>> report-gnome.c > > >>>> > > >>>> Tried extensions .c .C .c++ .cc .cpp .cxx .m .M .mm .h .hh .h++ .hm > > >>>> .hpp > > >>>> .hxx .in .txx > > >>>> > > >>>> CMake Error at gnucash/report/report-system/CMakeLists.txt:18 > > >>>> (add_library): Cannot find source file: > > >>>> > > >>>> > > >>>> > /home/maf/src/gnucash-maint-csv-export/gnucash/report/report-system/swi > > >>>> g- > > >>>> report-system.c > > >>>> > > >>>> Tried extensions .c .C .c++ .cc .cpp .cxx .m .M .mm .h .hh .h++ .hm > > >>>> .hpp > > >>>> .hxx .in .txx > > >>>> > > >>>> CMake Error: CMake can not determine linker language for target: > > >>>> test-core- > > >>>> guile > > >>>> CMake Error: Cannot determine link language for target > > >>>> "test-core-guile". > > >>>> CMake Error: CMake can not determine linker language for target: > > >>>> gncmod-app- utils > > >>>> CMake Error: Cannot determine link language for target > > >>>> "gncmod-app-utils". > > >>>> CMake Error: CMake can not determine linker language for target: > > >>>> gnc-core- > > >>>> utils > > >>>> CMake Error: Cannot determine link language for target > > >>>> "gnc-core-utils". > > >>>> CMake Error: CMake can not determine linker language for target: > > >>>> gncmod-engine CMake Error: Cannot determine link language for target > > >>>> "gncmod-engine". CMake Error: CMake can not determine linker > language > > >>>> for > > >>>> target: gnc-module CMake Error: Cannot determine link language for > > >>>> target > > >>>> "gnc-module". CMake Error: CMake can not determine linker language > for > > >>>> target: gnc-gnome CMake Error: Cannot determine link language for > > >>>> target > > >>>> "gnc-gnome". CMake Error: CMake can not determine linker language > for > > >>>> target: gncmod-gnome- utils > > >>>> CMake Error: Cannot determine link language for target > > >>>> "gncmod-gnome-utils". CMake Error: CMake can not determine linker > > >>>> language for target: > > >>>> gncmod-html CMake Error: Cannot determine link language for target > > >>>> "gncmod-html". CMake Error: CMake can not determine linker language > for > > >>>> target: gncmod- report-gnome > > >>>> CMake Error: Cannot determine link language for target > > >>>> "gncmod-report-gnome". CMake Error: CMake can not determine linker > > >>>> language > > >>>> for target: gncmod- report-system > > >>>> CMake Error: Cannot determine link language for target > > >>>> "gncmod-report-system". -- Generating done > > >>>> -- Build files have been written to: /home/maf/src/build-gc-vat > > >>>> maf@janus:~/src/build-gc-vat> > > >>> > > >>> _______________________________________________ > > >>> gnucash-devel mailing list > > >>> gnucash-devel@gnucash.org > > >>> https://lists.gnucash.org/mailman/listinfo/gnucash-devel > > >> > > >> _______________________________________________ > > >> gnucash-devel mailing list > > >> gnucash-devel@gnucash.org > > >> https://lists.gnucash.org/mailman/listinfo/gnucash-devel > > > -- > Maf. King > PGP Key fingerprint = 8D68 A91F 733B 2C1F 43B7 2B7C E591 E8E1 0DE7 C542 > > > > > > _______________________________________________ > gnucash-devel mailing list > gnucash-devel@gnucash.org > https://lists.gnucash.org/mailman/listinfo/gnucash-devel > _______________________________________________ gnucash-devel mailing list gnucash-devel@gnucash.org https://lists.gnucash.org/mailman/listinfo/gnucash-devel
