I just tried to compile the Italian guide and I found that the process
broke because I forgot to submit the two attached makefile.
Sorry and thanks!
Ciao!
# Makefile.in generated by automake 1.9.6 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
#
# No modifications of this Makefile should be necessary.
#
# To use this template:
# 1) Define: figdir, docname, lang, omffile, and entities in
# your Makefile.am file for each document directory,
# although figdir, omffile, and entities may be empty
# 2) Make sure the Makefile in (1) also includes
# "include $(top_srcdir)/xmldocs.make" and
# "dist-hook: app-dist-hook".
# 3) Optionally define 'entities' to hold xml entities which
# you would also like installed
# 4) Figures must go under $(figdir)/ and be in PNG format
# 5) You should only have one document per directory
# 6) Note that the figure directory, $(figdir)/, should not have its
# own Makefile since this Makefile installs those figures.
#
# example Makefile.am:
# figdir = figures
# docname = scrollkeeper-manual
# lang = C
# omffile=scrollkeeper-manual-C.omf
# entities = fdl.xml
# include $(top_srcdir)/xmldocs.make
# dist-hook: app-dist-hook
#
# About this file:
# This file was taken from scrollkeeper_example2, a package illustrating
# how to install documentation and OMF files for use with ScrollKeeper
# 0.3.x and 0.4.x. For more information, see:
# http://scrollkeeper.sourceforge.net/
# Version: 0.1.2 (last updated: March 20, 2002)
#
#
# No modifications of this Makefile should be necessary.
#
# This file contains the build instructions for installing OMF files. It is
# generally called from the makefiles for particular formats of documentation.
#
# Note that you must configure your package with --localstatedir=/var/lib
# so that the scrollkeeper-update command below will update the database
# in the standard scrollkeeper directory.
#
# If it is impossible to configure with --localstatedir=/var/lib, then
# modify the definition of scrollkeeper_localstate_dir so that
# it points to the correct location. Note that you must still use
# $(localstatedir) in this or when people build RPMs it will update
# the real database on their system instead of the one under RPM_BUILD_ROOT.
#
# Note: This make file is not incorporated into xmldocs.make because, in
# general, there will be other documents install besides XML documents
# and the makefiles for these formats should also include this file.
#
# About this file:
# This file was taken from scrollkeeper_example2, a package illustrating
# how to install documentation and OMF files for use with ScrollKeeper
# 0.3.x and 0.4.x. For more information, see:
# http://scrollkeeper.sourceforge.net/
# Version: 0.1.2 (last updated: March 20, 2002)
#
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ../..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
$(top_srcdir)/omf.make $(top_srcdir)/xmldocs.make
subdir = guide/it_IT
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
ENABLE_SK_FALSE = @ENABLE_SK_FALSE@
ENABLE_SK_TRUE = @ENABLE_SK_TRUE@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
SCROLLKEEPER_BUILD_REQUIRED = @SCROLLKEEPER_BUILD_REQUIRED@
SCROLLKEEPER_CONFIG = @SCROLLKEEPER_CONFIG@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
VERSION = @VERSION@
XSLTPROC = @XSLTPROC@
am__leading_dot = @am__leading_dot@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build_alias = @build_alias@
datadir = @datadir@
datarootdir = @datarootdir@
# ************* Begin of section some packagers may need to modify
**************
# This variable (docdir) specifies where the documents should be installed.
# This default value should work for most packages.
# docdir = $(datadir)/@PACKAGE@/doc/$(docname)/$(lang)
docdir = $(datadir)/gnome/help/gnucash/$(lang)
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host_alias = @host_alias@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
figdir = figures
docname = gnucash-guide
lang = it_IT
omffile = gnucash-guide-it_IT.omf
entities = \
fdl-appendix.xml \
legal.xml \
ch_oview.xml \
ch_basics.xml \
ch_accts.xml \
ch_txns.xml \
ch_cbook.xml \
ch_cc.xml \
ch_loans.xml \
ch_invest.xml \
ch_capgain.xml \
ch_currency.xml \
ch_dep.xml \
ch_bus_ar.xml \
ch_bus_ap.xml \
ch_bus_pay.xml \
ch_budgets.xml \
appendixa.xml \
appendixb.xml \
appendixc.xml \
appendixd.xml
# This file is changed from the original to generate html files for GnuCash,
# install them in a subdir with the docname and copy the stylesheet png's in.
# Dec 2002 Chris Lyttle
# ************** You should not have to edit below this line
*******************
xml_files = $(entities) $(docname).xml
styledir = $(top_srcdir)/stylesheet
EXTRA_DIST = $(xml_files) $(omffile)
CLEANFILES = omf_timestamp $(docname)/*.html
omf_dest_dir = $(datadir)/omf/gnucash-docs
scrollkeeper_localstate_dir = $(localstatedir)/scrollkeeper
DISTCLEANFILES = gnucash-guide-it_IT.omf.out
all: all-am
.SUFFIXES:
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/xmldocs.make
$(top_srcdir)/omf.make $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu guide/it_IT/Makefile'; \
cd $(top_srcdir) && \
$(AUTOMAKE) --gnu guide/it_IT/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
uninstall-info-am:
tags: TAGS
TAGS:
ctags: CTAGS
CTAGS:
distdir: $(DISTFILES)
$(mkdir_p) $(distdir)/../..
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
list='$(DISTFILES)'; for file in $$list; do \
case $$file in \
$(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
$(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
esac; \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
if test "$$dir" != "$$file" && test "$$dir" != "."; then \
dir="/$$dir"; \
$(mkdir_p) "$(distdir)$$dir"; \
else \
dir=''; \
fi; \
if test -d $$d/$$file; then \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
else \
test -f $(distdir)/$$file \
|| cp -p $$d/$$file $(distdir)/$$file \
|| exit 1; \
fi; \
done
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$(top_distdir)" distdir="$(distdir)" \
dist-hook
check-am: all-am
check: check-am
all-am: Makefile
installdirs:
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-am
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-am
clean-am: clean-generic mostlyclean-am
distclean: distclean-am
-rm -f Makefile
distclean-am: clean-am distclean-generic
dvi: dvi-am
dvi-am:
info: info-am
info-am:
install-data-am: install-data-local
@$(NORMAL_INSTALL)
$(MAKE) $(AM_MAKEFLAGS) install-data-hook
install-exec-am:
install-info: install-info-am
install-man:
installcheck-am:
maintainer-clean: maintainer-clean-am
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-am
mostlyclean-am: mostlyclean-generic
pdf: pdf-am
pdf-am:
ps: ps-am
ps-am:
uninstall-am: uninstall-info-am uninstall-local
.PHONY: all all-am check check-am clean clean-generic dist-hook \
distclean distclean-generic distdir dvi dvi-am html html-am \
info info-am install install-am install-data install-data-am \
install-data-hook install-data-local install-exec \
install-exec-am install-info install-info-am install-man \
install-strip installcheck installcheck-am installdirs \
maintainer-clean maintainer-clean-generic mostlyclean \
mostlyclean-generic pdf pdf-am ps ps-am uninstall uninstall-am \
uninstall-info-am uninstall-local
# Convert xml to html with xsltproc
# xsltproc -o outputdir/
/usr/share/sgml/docbook/xsl-stylesheets/html/chunk.xsl filename.xml
convert-html:
$(mkinstalldirs) "$(docname)"; \
for file in $(docname).xml; do \
xsltproc -o "$(docname)/" --param use.id.as.filename "1" \
"$(top_srcdir)/xsl/general-customization.xsl" "$(srcdir)/$$file"; \
done
copy-pics:
$(mkinstalldirs) "$(docname)/$(figdir)"; \
for file in $(srcdir)/$(figdir)/*.png; do \
basefile=`echo $$file | sed -e 's,^.*/,,'`; \
$(INSTALL_DATA) "$$file" "$(srcdir)/$(docname)/$(figdir)/$$basefile"; \
done
copy-style:
$(mkinstalldirs) "$(docname)/stylesheet"; \
for file in $(styledir)/*.png; do \
basefile=`echo $$file | sed -e 's,^.*/,,'`; \
$(INSTALL_DATA) "$$file" "$(srcdir)/$(docname)/stylesheet/$$basefile";
\
done
omf: omf_timestamp
omf_timestamp: $(omffile)
-for file in $(omffile); do \
scrollkeeper-preinstall $(docdir)/$(docname).xml $(srcdir)/$$file
$$file.out; \
done
touch omf_timestamp
install-data-hook-omf:
$(mkinstalldirs) "$(DESTDIR)$(omf_dest_dir)"
for file in $(omffile); do \
$(INSTALL_DATA) "$$file.out" "$(DESTDIR)$(omf_dest_dir)/$$file"; \
done
@if test "x$(_ENABLE_SK)" = "xtrue"; then \
scrollkeeper-update -p "$(scrollkeeper_localstate_dir)" -o
"$(DESTDIR)$(omf_dest_dir)"; \
fi;
uninstall-local-omf:
@if test "x$(_ENABLE_SK)" == "xtrue"; then \
scrollkeeper-uninstall -p "$(scrollkeeper_localstate_dir)"
"$(DESTDIR)$(omf_dest_dir)/$$file"; \
fi; \
for file in $(srcdir)/*.omf; do \
basefile=`echo $$file | sed -e 's,^.*/,,'`; \
rm -f "$(DESTDIR)$(omf_dest_dir)/$$basefile"; \
done
# If the following file is in a subdir (like help/) you need to add that to the
path
html: all convert-html copy-pics copy-style
all: omf
#$(docname).xml: $(entities)
# -ourdir=`pwd`; \
# cd $(srcdir); \
# cp $(entities) $$ourdir
app-dist-hook:
if test "$(figdir)"; then \
$(mkinstalldirs) "$(distdir)/$(figdir)"; \
fi;
for file in $(srcdir)/$(figdir)/*.png; do \
basefile=`echo $$file | sed -e 's,^.*/,,'`; \
$(INSTALL_DATA) "$$file" "$(distdir)/$(figdir)/$$basefile"; \
done
install-data-local:
$(mkinstalldirs) "$(DESTDIR)$(docdir)";
for file in $(xml_files); do \
cp "$(srcdir)/$$file" "$(DESTDIR)$(docdir)"; \
done
if test "$(figdir)"; then \
$(mkinstalldirs) "$(DESTDIR)$(docdir)/$(figdir)"; \
fi;
for file in $(srcdir)/$(figdir)/*.png; do \
basefile=`echo $$file | sed -e 's,^.*/,,'`; \
$(INSTALL_DATA) "$$file" "$(DESTDIR)$(docdir)/$(figdir)/$$basefile"; \
done
install-data-hook: install-data-hook-omf
uninstall-local: uninstall-local-doc uninstall-local-omf
uninstall-local-doc:
-if test "$(figdir)"; then \
for file in $(srcdir)/$(figdir)/*.png; do \
basefile=`echo $$file | sed -e 's,^.*/,,'`; \
rm -f "$(DESTDIR)$(docdir)/$(figdir)/$$basefile"; \
done \
fi;
-if test "$(figdir)"; then \
for file in $(srcdir)/$(figdir)/*.png; do \
basefile=`echo $$file | sed -e 's,^.*/,,'`; \
rm -f "$(DESTDIR)$(docdir)/$(docname)/$(figdir)/$$basefile"; \
done \
fi;
-if test "$(docname)"; then \
for file in $(styledir)/*.png; do \
basefile=`echo $$file | sed -e 's,^.*/,,'`; \
rm -f "$(DESTDIR)$(docdir)/$(docname)/stylesheet/$$basefile"; \
done \
for file in $(srcdir)/$(docname)/*.html; do \
basefile=`echo $$file | sed -e 's,^.*/,,'`; \
rm -f "$(DESTDIR)$(docdir)/$(docname)/$$basefile"; \
done \
fi;
-for file in $(xml_files); do \
rm -f "$(DESTDIR)$(docdir)/$$file"; \
done
dist-hook: app-dist-hook
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
# Makefile.in generated by automake 1.9.6 from Makefile.am.
# guide/it_IT/Makefile. Generated from Makefile.in by configure.
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
#
# No modifications of this Makefile should be necessary.
#
# To use this template:
# 1) Define: figdir, docname, lang, omffile, and entities in
# your Makefile.am file for each document directory,
# although figdir, omffile, and entities may be empty
# 2) Make sure the Makefile in (1) also includes
# "include $(top_srcdir)/xmldocs.make" and
# "dist-hook: app-dist-hook".
# 3) Optionally define 'entities' to hold xml entities which
# you would also like installed
# 4) Figures must go under $(figdir)/ and be in PNG format
# 5) You should only have one document per directory
# 6) Note that the figure directory, $(figdir)/, should not have its
# own Makefile since this Makefile installs those figures.
#
# example Makefile.am:
# figdir = figures
# docname = scrollkeeper-manual
# lang = C
# omffile=scrollkeeper-manual-C.omf
# entities = fdl.xml
# include $(top_srcdir)/xmldocs.make
# dist-hook: app-dist-hook
#
# About this file:
# This file was taken from scrollkeeper_example2, a package illustrating
# how to install documentation and OMF files for use with ScrollKeeper
# 0.3.x and 0.4.x. For more information, see:
# http://scrollkeeper.sourceforge.net/
# Version: 0.1.2 (last updated: March 20, 2002)
#
#
# No modifications of this Makefile should be necessary.
#
# This file contains the build instructions for installing OMF files. It is
# generally called from the makefiles for particular formats of documentation.
#
# Note that you must configure your package with --localstatedir=/var/lib
# so that the scrollkeeper-update command below will update the database
# in the standard scrollkeeper directory.
#
# If it is impossible to configure with --localstatedir=/var/lib, then
# modify the definition of scrollkeeper_localstate_dir so that
# it points to the correct location. Note that you must still use
# $(localstatedir) in this or when people build RPMs it will update
# the real database on their system instead of the one under RPM_BUILD_ROOT.
#
# Note: This make file is not incorporated into xmldocs.make because, in
# general, there will be other documents install besides XML documents
# and the makefiles for these formats should also include this file.
#
# About this file:
# This file was taken from scrollkeeper_example2, a package illustrating
# how to install documentation and OMF files for use with ScrollKeeper
# 0.3.x and 0.4.x. For more information, see:
# http://scrollkeeper.sourceforge.net/
# Version: 0.1.2 (last updated: March 20, 2002)
#
srcdir = .
top_srcdir = ../..
pkgdatadir = $(datadir)/gnucash-docs
pkglibdir = $(libdir)/gnucash-docs
pkgincludedir = $(includedir)/gnucash-docs
top_builddir = ../..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = /usr/bin/install -c
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
$(top_srcdir)/omf.make $(top_srcdir)/xmldocs.make
subdir = guide/it_IT
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = ${SHELL} /home/cristian/gnucash-docs/missing --run aclocal-1.9
AMTAR = ${SHELL} /home/cristian/gnucash-docs/missing --run tar
AUTOCONF = ${SHELL} /home/cristian/gnucash-docs/missing --run autoconf
AUTOHEADER = ${SHELL} /home/cristian/gnucash-docs/missing --run autoheader
AUTOMAKE = ${SHELL} /home/cristian/gnucash-docs/missing --run automake-1.9
AWK = mawk
CYGPATH_W = echo
DEFS = -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\"
-DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"gnucash-docs\"
-DVERSION=\"2.2.0\"
ECHO_C =
ECHO_N = -n
ECHO_T =
ENABLE_SK_FALSE = #
ENABLE_SK_TRUE =
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
LIBOBJS =
LIBS =
LTLIBOBJS =
MAKEINFO = ${SHELL} /home/cristian/gnucash-docs/missing --run makeinfo
PACKAGE = gnucash-docs
PACKAGE_BUGREPORT =
PACKAGE_NAME =
PACKAGE_STRING =
PACKAGE_TARNAME =
PACKAGE_VERSION =
PATH_SEPARATOR = :
SCROLLKEEPER_BUILD_REQUIRED = 0.3.4
SCROLLKEEPER_CONFIG = /usr/bin/scrollkeeper-config
SET_MAKE =
SHELL = /bin/bash
STRIP =
VERSION = 2.2.0
XSLTPROC = /usr/bin/xsltproc
am__leading_dot = .
am__tar = ${AMTAR} chof - "$$tardir"
am__untar = ${AMTAR} xf -
bindir = ${exec_prefix}/bin
build_alias =
datadir = ${datarootdir}
datarootdir = ${prefix}/share
# ************* Begin of section some packagers may need to modify
**************
# This variable (docdir) specifies where the documents should be installed.
# This default value should work for most packages.
# docdir = $(datadir)/gnucash-docs/doc/$(docname)/$(lang)
docdir = $(datadir)/gnome/help/gnucash/$(lang)
dvidir = ${docdir}
exec_prefix = ${prefix}
host_alias =
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = ${datarootdir}/info
install_sh = /home/cristian/gnucash-docs/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localedir = ${datarootdir}/locale
localstatedir = ${prefix}/var
mandir = ${datarootdir}/man
mkdir_p = mkdir -p --
oldincludedir = /usr/include
pdfdir = ${docdir}
prefix = /opt/gnucash-svn
program_transform_name = s,x,x,
psdir = ${docdir}
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
sysconfdir = ${prefix}/etc
target_alias =
figdir = figures
docname = gnucash-guide
lang = it_IT
omffile = gnucash-guide-it_IT.omf
entities = \
fdl-appendix.xml \
legal.xml \
ch_oview.xml \
ch_basics.xml \
ch_accts.xml \
ch_txns.xml \
ch_cbook.xml \
ch_cc.xml \
ch_loans.xml \
ch_invest.xml \
ch_capgain.xml \
ch_currency.xml \
ch_dep.xml \
ch_bus_ar.xml \
ch_bus_ap.xml \
ch_bus_pay.xml \
ch_budgets.xml \
appendixa.xml \
appendixb.xml \
appendixc.xml \
appendixd.xml
# This file is changed from the original to generate html files for GnuCash,
# install them in a subdir with the docname and copy the stylesheet png's in.
# Dec 2002 Chris Lyttle
# ************** You should not have to edit below this line
*******************
xml_files = $(entities) $(docname).xml
styledir = $(top_srcdir)/stylesheet
EXTRA_DIST = $(xml_files) $(omffile)
CLEANFILES = omf_timestamp $(docname)/*.html
omf_dest_dir = $(datadir)/omf/gnucash-docs
scrollkeeper_localstate_dir = $(localstatedir)/scrollkeeper
DISTCLEANFILES = gnucash-guide-it_IT.omf.out
all: all-am
.SUFFIXES:
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/xmldocs.make
$(top_srcdir)/omf.make $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu guide/it_IT/Makefile'; \
cd $(top_srcdir) && \
$(AUTOMAKE) --gnu guide/it_IT/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
uninstall-info-am:
tags: TAGS
TAGS:
ctags: CTAGS
CTAGS:
distdir: $(DISTFILES)
$(mkdir_p) $(distdir)/../..
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
list='$(DISTFILES)'; for file in $$list; do \
case $$file in \
$(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
$(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
esac; \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
if test "$$dir" != "$$file" && test "$$dir" != "."; then \
dir="/$$dir"; \
$(mkdir_p) "$(distdir)$$dir"; \
else \
dir=''; \
fi; \
if test -d $$d/$$file; then \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
else \
test -f $(distdir)/$$file \
|| cp -p $$d/$$file $(distdir)/$$file \
|| exit 1; \
fi; \
done
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$(top_distdir)" distdir="$(distdir)" \
dist-hook
check-am: all-am
check: check-am
all-am: Makefile
installdirs:
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-am
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-am
clean-am: clean-generic mostlyclean-am
distclean: distclean-am
-rm -f Makefile
distclean-am: clean-am distclean-generic
dvi: dvi-am
dvi-am:
info: info-am
info-am:
install-data-am: install-data-local
@$(NORMAL_INSTALL)
$(MAKE) $(AM_MAKEFLAGS) install-data-hook
install-exec-am:
install-info: install-info-am
install-man:
installcheck-am:
maintainer-clean: maintainer-clean-am
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-am
mostlyclean-am: mostlyclean-generic
pdf: pdf-am
pdf-am:
ps: ps-am
ps-am:
uninstall-am: uninstall-info-am uninstall-local
.PHONY: all all-am check check-am clean clean-generic dist-hook \
distclean distclean-generic distdir dvi dvi-am html html-am \
info info-am install install-am install-data install-data-am \
install-data-hook install-data-local install-exec \
install-exec-am install-info install-info-am install-man \
install-strip installcheck installcheck-am installdirs \
maintainer-clean maintainer-clean-generic mostlyclean \
mostlyclean-generic pdf pdf-am ps ps-am uninstall uninstall-am \
uninstall-info-am uninstall-local
# Convert xml to html with xsltproc
# xsltproc -o outputdir/
/usr/share/sgml/docbook/xsl-stylesheets/html/chunk.xsl filename.xml
convert-html:
$(mkinstalldirs) "$(docname)"; \
for file in $(docname).xml; do \
xsltproc -o "$(docname)/" --param use.id.as.filename "1" \
"$(top_srcdir)/xsl/general-customization.xsl" "$(srcdir)/$$file"; \
done
copy-pics:
$(mkinstalldirs) "$(docname)/$(figdir)"; \
for file in $(srcdir)/$(figdir)/*.png; do \
basefile=`echo $$file | sed -e 's,^.*/,,'`; \
$(INSTALL_DATA) "$$file" "$(srcdir)/$(docname)/$(figdir)/$$basefile"; \
done
copy-style:
$(mkinstalldirs) "$(docname)/stylesheet"; \
for file in $(styledir)/*.png; do \
basefile=`echo $$file | sed -e 's,^.*/,,'`; \
$(INSTALL_DATA) "$$file" "$(srcdir)/$(docname)/stylesheet/$$basefile";
\
done
omf: omf_timestamp
omf_timestamp: $(omffile)
-for file in $(omffile); do \
scrollkeeper-preinstall $(docdir)/$(docname).xml $(srcdir)/$$file
$$file.out; \
done
touch omf_timestamp
install-data-hook-omf:
$(mkinstalldirs) "$(DESTDIR)$(omf_dest_dir)"
for file in $(omffile); do \
$(INSTALL_DATA) "$$file.out" "$(DESTDIR)$(omf_dest_dir)/$$file"; \
done
@if test "x$(_ENABLE_SK)" = "xtrue"; then \
scrollkeeper-update -p "$(scrollkeeper_localstate_dir)" -o
"$(DESTDIR)$(omf_dest_dir)"; \
fi;
uninstall-local-omf:
@if test "x$(_ENABLE_SK)" == "xtrue"; then \
scrollkeeper-uninstall -p "$(scrollkeeper_localstate_dir)"
"$(DESTDIR)$(omf_dest_dir)/$$file"; \
fi; \
for file in $(srcdir)/*.omf; do \
basefile=`echo $$file | sed -e 's,^.*/,,'`; \
rm -f "$(DESTDIR)$(omf_dest_dir)/$$basefile"; \
done
# If the following file is in a subdir (like help/) you need to add that to the
path
html: all convert-html copy-pics copy-style
all: omf
#$(docname).xml: $(entities)
# -ourdir=`pwd`; \
# cd $(srcdir); \
# cp $(entities) $$ourdir
app-dist-hook:
if test "$(figdir)"; then \
$(mkinstalldirs) "$(distdir)/$(figdir)"; \
fi;
for file in $(srcdir)/$(figdir)/*.png; do \
basefile=`echo $$file | sed -e 's,^.*/,,'`; \
$(INSTALL_DATA) "$$file" "$(distdir)/$(figdir)/$$basefile"; \
done
install-data-local:
$(mkinstalldirs) "$(DESTDIR)$(docdir)";
for file in $(xml_files); do \
cp "$(srcdir)/$$file" "$(DESTDIR)$(docdir)"; \
done
if test "$(figdir)"; then \
$(mkinstalldirs) "$(DESTDIR)$(docdir)/$(figdir)"; \
fi;
for file in $(srcdir)/$(figdir)/*.png; do \
basefile=`echo $$file | sed -e 's,^.*/,,'`; \
$(INSTALL_DATA) "$$file" "$(DESTDIR)$(docdir)/$(figdir)/$$basefile"; \
done
install-data-hook: install-data-hook-omf
uninstall-local: uninstall-local-doc uninstall-local-omf
uninstall-local-doc:
-if test "$(figdir)"; then \
for file in $(srcdir)/$(figdir)/*.png; do \
basefile=`echo $$file | sed -e 's,^.*/,,'`; \
rm -f "$(DESTDIR)$(docdir)/$(figdir)/$$basefile"; \
done \
fi;
-if test "$(figdir)"; then \
for file in $(srcdir)/$(figdir)/*.png; do \
basefile=`echo $$file | sed -e 's,^.*/,,'`; \
rm -f "$(DESTDIR)$(docdir)/$(docname)/$(figdir)/$$basefile"; \
done \
fi;
-if test "$(docname)"; then \
for file in $(styledir)/*.png; do \
basefile=`echo $$file | sed -e 's,^.*/,,'`; \
rm -f "$(DESTDIR)$(docdir)/$(docname)/stylesheet/$$basefile"; \
done \
for file in $(srcdir)/$(docname)/*.html; do \
basefile=`echo $$file | sed -e 's,^.*/,,'`; \
rm -f "$(DESTDIR)$(docdir)/$(docname)/$$basefile"; \
done \
fi;
-for file in $(xml_files); do \
rm -f "$(DESTDIR)$(docdir)/$$file"; \
done
dist-hook: app-dist-hook
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
_______________________________________________
gnucash-devel mailing list
gnucash-devel@gnucash.org
https://lists.gnucash.org/mailman/listinfo/gnucash-devel
