Hello, We ended up restoring the backup since it was easy on a test system.
Does anyone know if you need to upgrade multiple major versions sequentially, or can you jump to the highest version? For example, to go from GlusterFS 5 to 8 can you upgrade to 8 directly, or must you do 6 and 7 in between? Thanks in advance. On Sat, 20 Mar 2021 at 09:58, David Cunningham <[email protected]> wrote: > Hi Strahil, > > It's as follows. Do you see anything unusual? Thanks. > > root@caes8:~# ls -al /var/lib/glusterd/vols/gvol0/ > total 52 > drwxr-xr-x 3 root root 4096 Mar 18 17:06 . > drwxr-xr-x 3 root root 4096 Jul 17 2018 .. > drwxr-xr-x 2 root root 4096 Mar 18 17:06 bricks > -rw------- 1 root root 16 Mar 18 17:06 cksum > -rw------- 1 root root 3848 Mar 18 16:52 > gvol0.caes8.nodirectwritedata-gluster-gvol0.vol > -rw------- 1 root root 2270 Feb 14 2020 gvol0.gfproxyd.vol > -rw------- 1 root root 1715 Mar 18 16:52 gvol0.tcp-fuse.vol > -rw------- 1 root root 729 Mar 18 17:06 info > -rw------- 1 root root 0 Feb 14 2020 marker.tstamp > -rw------- 1 root root 168 Mar 18 17:06 node_state.info > -rw------- 1 root root 18 Mar 18 17:06 quota.cksum > -rw------- 1 root root 0 Jul 17 2018 quota.conf > -rw------- 1 root root 13 Mar 18 17:06 snapd.info > -rw------- 1 root root 1829 Mar 18 16:52 trusted-gvol0.tcp-fuse.vol > -rw------- 1 root root 896 Feb 14 2020 trusted-gvol0.tcp-gfproxy-fuse.vol > > > On Fri, 19 Mar 2021 at 17:51, Strahil Nikolov <[email protected]> > wrote: > >> [2021-03-18 23:52:52.084754] E [MSGID: 101019] [xlator.c:715:xlator_init] >> 0-gvol0-server: Initialization of volume 'gvol0-server' failed, review your >> volfile again >> >> What is the content of : >> >> /var/lib/glusterd/vols/gvol0 ? >> >> >> Best Regards, >> >> Strahil Nikolov >> >> On Fri, Mar 19, 2021 at 3:02, David Cunningham >> <[email protected]> wrote: >> Hello, >> >> We have a single node/brick GlusterFS test system which unfortunately had >> GlusterFS upgraded from version 5 to 6 while the GlusterFS processes were >> still running. I know this is not what the "Generic Upgrade procedure" >> recommends. >> >> Following a restart the brick is not online, and we can't see any error >> message explaining exactly why. Would anyone have an idea of where to look? >> >> Since the logs from the time of the upgrade and reboot are a bit lengthy >> I've attached them in a text file. >> >> Thank you in advance for any advice! >> >> -- >> David Cunningham, Voisonics Limited >> http://voisonics.com/ >> USA: +1 213 221 1092 >> New Zealand: +64 (0)28 2558 3782 >> ________ >> >> >> >> Community Meeting Calendar: >> >> Schedule - >> Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC >> Bridge: https://meet.google.com/cpu-eiue-hvk >> Gluster-users mailing list >> [email protected] >> https://lists.gluster.org/mailman/listinfo/gluster-users >> >> > > -- > David Cunningham, Voisonics Limited > http://voisonics.com/ > USA: +1 213 221 1092 > New Zealand: +64 (0)28 2558 3782 > -- David Cunningham, Voisonics Limited http://voisonics.com/ USA: +1 213 221 1092 New Zealand: +64 (0)28 2558 3782
________ Community Meeting Calendar: Schedule - Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC Bridge: https://meet.google.com/cpu-eiue-hvk Gluster-users mailing list [email protected] https://lists.gluster.org/mailman/listinfo/gluster-users
