Hmm... Looks like I forgot to set the xattr's to sa - I left them as default.
[root@pcic-backup01 ~]# zfs get xattr pcic-backup01-zpool NAME PROPERTY VALUE SOURCE pcic-backup01-zpool xattr on default [root@pcic-backup02 ~]# zfs get xattr pcic-backup02-zpool NAME PROPERTY VALUE SOURCE pcic-backup02-zpool xattr on default I wonder if I can change them and continue, or if I need to blow away the zpool and start over? Thanks, -Matthew -- Matthew Benstead System Administrator Pacific Climate Impacts Consortium <https://pacificclimate.org/> University of Victoria, UH1 PO Box 1800, STN CSC Victoria, BC, V8W 2Y2 Phone: +1-250-721-8432 Email: [email protected] On 10/5/20 12:53 PM, Felix Kölzow wrote: > > Dear Matthew, > > this is our configuration: > > zfs get all mypool > > mypool xattr > sa local > mypool acltype > posixacl local > > > Something more to consider? > > > Regards, > > Felix > > > > On 05/10/2020 21:11, Matthew Benstead wrote: >> Thanks Felix - looking through some more of the logs I may have found >> the reason... >> >> From >> /var/log/glusterfs/geo-replication/storage_10.0.231.81_pcic-backup/mnt-data-storage_a-storage.log >> >> [2020-10-05 18:13:35.736838] E [fuse-bridge.c:4288:fuse_xattr_cbk] >> 0-glusterfs-fuse: extended attribute not supported by the backend storage >> [2020-10-05 18:18:53.885591] E [fuse-bridge.c:4288:fuse_xattr_cbk] >> 0-glusterfs-fuse: extended attribute not supported by the backend storage >> [2020-10-05 18:22:14.405234] E [fuse-bridge.c:4288:fuse_xattr_cbk] >> 0-glusterfs-fuse: extended attribute not supported by the backend storage >> [2020-10-05 18:25:53.971679] E [fuse-bridge.c:4288:fuse_xattr_cbk] >> 0-glusterfs-fuse: extended attribute not supported by the backend storage >> [2020-10-05 18:31:44.571557] E [fuse-bridge.c:4288:fuse_xattr_cbk] >> 0-glusterfs-fuse: extended attribute not supported by the backend storage >> [2020-10-05 18:36:36.508772] E [fuse-bridge.c:4288:fuse_xattr_cbk] >> 0-glusterfs-fuse: extended attribute not supported by the backend storage >> [2020-10-05 18:40:10.401055] E [fuse-bridge.c:4288:fuse_xattr_cbk] >> 0-glusterfs-fuse: extended attribute not supported by the backend storage >> [2020-10-05 18:42:57.833536] E [fuse-bridge.c:4288:fuse_xattr_cbk] >> 0-glusterfs-fuse: extended attribute not supported by the backend storage >> [2020-10-05 18:45:19.691953] E [fuse-bridge.c:4288:fuse_xattr_cbk] >> 0-glusterfs-fuse: extended attribute not supported by the backend storage >> [2020-10-05 18:48:26.478532] E [fuse-bridge.c:4288:fuse_xattr_cbk] >> 0-glusterfs-fuse: extended attribute not supported by the backend storage >> [2020-10-05 18:52:24.466914] E [fuse-bridge.c:4288:fuse_xattr_cbk] >> 0-glusterfs-fuse: extended attribute not supported by the backend storage >> >> >> The slave nodes are running gluster on top of ZFS, but I had >> configured ACLs - is there something else missing to make this work >> with ZFS? >> >> [root@pcic-backup01 ~]# gluster volume info >> >> Volume Name: pcic-backup >> Type: Distribute >> Volume ID: 7af8a424-f4b6-4405-bba1-0dbafb0fa231 >> Status: Started >> Snapshot Count: 0 >> Number of Bricks: 2 >> Transport-type: tcp >> Bricks: >> Brick1: 10.0.231.81:/pcic-backup01-zpool/brick >> Brick2: 10.0.231.82:/pcic-backup02-zpool/brick >> Options Reconfigured: >> network.ping-timeout: 10 >> performance.cache-size: 256MB >> server.event-threads: 4 >> client.event-threads: 4 >> cluster.lookup-optimize: on >> performance.parallel-readdir: on >> performance.readdir-ahead: on >> features.quota-deem-statfs: on >> features.inode-quota: on >> features.quota: on >> transport.address-family: inet >> nfs.disable: on >> features.read-only: off >> performance.open-behind: off >> >> >> [root@pcic-backup01 ~]# zfs get acltype pcic-backup01-zpool >> NAME PROPERTY VALUE SOURCE >> pcic-backup01-zpool acltype posixacl local >> >> [root@pcic-backup01 ~]# grep "pcic-backup0" /proc/mounts >> pcic-backup01-zpool /pcic-backup01-zpool zfs >> rw,seclabel,xattr,posixacl 0 0 >> >> >> [root@pcic-backup02 ~]# zfs get acltype pcic-backup02-zpool >> NAME PROPERTY VALUE SOURCE >> pcic-backup02-zpool acltype posixacl local >> >> [root@pcic-backup02 ~]# grep "pcic-backup0" /proc/mounts >> pcic-backup02-zpool /pcic-backup02-zpool zfs >> rw,seclabel,xattr,posixacl 0 0 >> >> Thanks, >> -Matthew >> >> >> -- >> Matthew Benstead >> System Administrator >> Pacific Climate Impacts Consortium <https://pacificclimate.org/> >> University of Victoria, UH1 >> PO Box 1800, STN CSC >> Victoria, BC, V8W 2Y2 >> Phone: +1-250-721-8432 >> Email: [email protected] >> >> On 10/5/20 1:39 AM, Felix Kölzow wrote: >>> Dear Matthew, >>> >>> >>> can you provide more information regarding to the geo-replication brick >>> logs. >>> >>> These files area also located in: >>> >>> /var/log/glusterfs/geo-replication/storage_10.0.231.81_pcic-backup/ >>> >>> >>> Usually, these log files are more precise to figure out the root cause >>> of the error. >>> >>> Additionally, it is also worth to look at the log-files on the slave >>> side. >>> >>> >>> Regards, >>> >>> Felix >>> >>> >>> On 01/10/2020 23:08, Matthew Benstead wrote: >>>> Hello, >>>> >>>> I'm looking for some help with a GeoReplication Error in my Gluster >>>> 7/CentOS 7 setup. Replication progress has basically stopped, and the >>>> status of the replication keeps switching. >>>> >>>> The gsyncd log has errors like "Operation not permitted", "incomplete >>>> sync", etc... help? I'm not sure how to proceed in troubleshooting >>>> this. >>>> >>>> The log is here, it basically just repeats - from: >>>> /var/log/glusterfs/geo-replication/storage_10.0.231.81_pcic-backup/gsyncd.log >>>> >>>> >>>> [2020-10-01 20:52:15.291923] I [master(worker >>>> /data/storage_a/storage):1991:syncjob] Syncer: Sync Time Taken >>>> duration=32.8466 num_files=1749 job=3 return_code=23 >>>> [2020-10-01 20:52:18.700062] I [master(worker >>>> /data/storage_c/storage):1991:syncjob] Syncer: Sync Time Taken >>>> duration=43.1210 num_files=3167 job=6 return_code=23 >>>> [2020-10-01 20:52:23.383234] W [master(worker >>>> /data/storage_c/storage):1393:process] _GMaster: incomplete sync, >>>> retrying changelogs files=['XSYNC-CHANGELOG.1601585397'] >>>> [2020-10-01 20:52:28.537657] E [repce(worker >>>> /data/storage_b/storage):213:__call__] RepceClient: call failed >>>> call=258187:140538843596608:1601585515.63 method=entry_ops >>>> error=OSError >>>> [2020-10-01 20:52:28.538064] E [syncdutils(worker >>>> /data/storage_b/storage):339:log_raise_exception] <top>: FAIL: >>>> Traceback (most recent call last): >>>> File "/usr/libexec/glusterfs/python/syncdaemon/gsyncd.py", line >>>> 332, >>>> in main >>>> func(args) >>>> File "/usr/libexec/glusterfs/python/syncdaemon/subcmds.py", line >>>> 86, >>>> in subcmd_worker >>>> local.service_loop(remote) >>>> File "/usr/libexec/glusterfs/python/syncdaemon/resource.py", line >>>> 1308, in service_loop >>>> g1.crawlwrap(oneshot=True, register_time=register_time) >>>> File "/usr/libexec/glusterfs/python/syncdaemon/master.py", line >>>> 602, >>>> in crawlwrap >>>> self.crawl() >>>> File "/usr/libexec/glusterfs/python/syncdaemon/master.py", line >>>> 1682, >>>> in crawl >>>> self.process([item[1]], 0) >>>> File "/usr/libexec/glusterfs/python/syncdaemon/master.py", line >>>> 1327, >>>> in process >>>> self.process_change(change, done, retry) >>>> File "/usr/libexec/glusterfs/python/syncdaemon/master.py", line >>>> 1221, >>>> in process_change >>>> failures = self.slave.server.entry_ops(entries) >>>> File "/usr/libexec/glusterfs/python/syncdaemon/repce.py", line >>>> 232, in >>>> __call__ >>>> return self.ins(self.meth, *a) >>>> File "/usr/libexec/glusterfs/python/syncdaemon/repce.py", line >>>> 214, in >>>> __call__ >>>> raise res >>>> OSError: [Errno 1] Operation not permitted >>>> [2020-10-01 20:52:28.570316] I [repce(agent >>>> /data/storage_b/storage):96:service_loop] RepceServer: terminating on >>>> reaching EOF. >>>> [2020-10-01 20:52:28.613603] I >>>> [gsyncdstatus(monitor):248:set_worker_status] GeorepStatus: Worker >>>> Status Change status=Faulty >>>> [2020-10-01 20:52:29.619797] I [master(worker >>>> /data/storage_c/storage):1991:syncjob] Syncer: Sync Time Taken >>>> duration=5.6458 num_files=455 job=3 return_code=23 >>>> [2020-10-01 20:52:38.286245] I [master(worker >>>> /data/storage_c/storage):1991:syncjob] Syncer: Sync Time Taken >>>> duration=14.1824 num_files=1333 job=2 return_code=23 >>>> [2020-10-01 20:52:38.628156] I >>>> [gsyncdstatus(monitor):248:set_worker_status] GeorepStatus: Worker >>>> Status Change status=Initializing... >>>> [2020-10-01 20:52:38.628325] I [monitor(monitor):159:monitor] Monitor: >>>> starting gsyncd worker brick=/data/storage_b/storage >>>> slave_node=10.0.231.82 >>>> [2020-10-01 20:52:38.684736] I [gsyncd(agent >>>> /data/storage_b/storage):318:main] <top>: Using session config >>>> file >>>> path=/var/lib/glusterd/geo-replication/storage_10.0.231.81_pcic-backup/gsyncd.conf >>>> >>>> [2020-10-01 20:52:38.687213] I [gsyncd(worker >>>> /data/storage_b/storage):318:main] <top>: Using session config >>>> file >>>> path=/var/lib/glusterd/geo-replication/storage_10.0.231.81_pcic-backup/gsyncd.conf >>>> >>>> [2020-10-01 20:52:38.687401] I [changelogagent(agent >>>> /data/storage_b/storage):72:__init__] ChangelogAgent: Agent >>>> listining... >>>> [2020-10-01 20:52:38.703295] I [resource(worker >>>> /data/storage_b/storage):1386:connect_remote] SSH: Initializing SSH >>>> connection between master and slave... >>>> [2020-10-01 20:52:40.388372] I [resource(worker >>>> /data/storage_b/storage):1435:connect_remote] SSH: SSH connection >>>> between master and slave established. duration=1.6849 >>>> [2020-10-01 20:52:40.388582] I [resource(worker >>>> /data/storage_b/storage):1105:connect] GLUSTER: Mounting gluster >>>> volume >>>> locally... >>>> [2020-10-01 20:52:41.501105] I [resource(worker >>>> /data/storage_b/storage):1128:connect] GLUSTER: Mounted gluster volume >>>> duration=1.1123 >>>> [2020-10-01 20:52:41.501405] I [subcmds(worker >>>> /data/storage_b/storage):84:subcmd_worker] <top>: Worker spawn >>>> successful. Acknowledging back to monitor >>>> [2020-10-01 20:52:43.531146] I [master(worker >>>> /data/storage_b/storage):1640:register] _GMaster: Working dir >>>> path=/var/lib/misc/gluster/gsyncd/storage_10.0.231.81_pcic-backup/data-storage_b-storage >>>> >>>> [2020-10-01 20:52:43.533953] I [resource(worker >>>> /data/storage_b/storage):1291:service_loop] GLUSTER: Register time >>>> time=1601585563 >>>> [2020-10-01 20:52:43.547092] I [gsyncdstatus(worker >>>> /data/storage_b/storage):281:set_active] GeorepStatus: Worker Status >>>> Change status=Active >>>> [2020-10-01 20:52:43.561920] I [gsyncdstatus(worker >>>> /data/storage_b/storage):253:set_worker_crawl_status] GeorepStatus: >>>> Crawl Status Change status=History Crawl >>>> [2020-10-01 20:52:43.562184] I [master(worker >>>> /data/storage_b/storage):1554:crawl] _GMaster: starting history >>>> crawl turns=1 stime=None entry_stime=None >>>> etime=1601585563 >>>> [2020-10-01 20:52:43.562269] I [resource(worker >>>> /data/storage_b/storage):1307:service_loop] GLUSTER: No stime >>>> available, >>>> using xsync crawl >>>> [2020-10-01 20:52:43.569799] I [master(worker >>>> /data/storage_b/storage):1670:crawl] _GMaster: starting hybrid >>>> crawl stime=None >>>> [2020-10-01 20:52:43.573528] I [gsyncdstatus(worker >>>> /data/storage_b/storage):253:set_worker_crawl_status] GeorepStatus: >>>> Crawl Status Change status=Hybrid Crawl >>>> [2020-10-01 20:52:44.370985] I [master(worker >>>> /data/storage_c/storage):1991:syncjob] Syncer: Sync Time Taken >>>> duration=20.4307 num_files=2609 job=5 return_code=23 >>>> [2020-10-01 20:52:49.431854] W [master(worker >>>> /data/storage_c/storage):1393:process] _GMaster: incomplete sync, >>>> retrying changelogs files=['XSYNC-CHANGELOG.1601585397'] >>>> [2020-10-01 20:52:54.801500] I [master(worker >>>> /data/storage_a/storage):1991:syncjob] Syncer: Sync Time Taken >>>> duration=72.7492 num_files=4227 job=2 return_code=23 >>>> [2020-10-01 20:52:56.766547] I [master(worker >>>> /data/storage_a/storage):1991:syncjob] Syncer: Sync Time Taken >>>> duration=74.3569 num_files=4674 job=5 return_code=23 >>>> [2020-10-01 20:53:18.853333] I [master(worker >>>> /data/storage_c/storage):1991:syncjob] Syncer: Sync Time Taken >>>> duration=28.7125 num_files=4397 job=3 return_code=23 >>>> [2020-10-01 20:53:21.224921] W [master(worker >>>> /data/storage_a/storage):1393:process] _GMaster: incomplete sync, >>>> retrying changelogs files=['CHANGELOG.1601044033', >>>> 'CHANGELOG.1601044048', 'CHANGELOG.1601044063', >>>> 'CHANGELOG.1601044078', >>>> 'CHANGELOG.1601044093', 'CHANGELOG.1601044108', >>>> 'CHANGELOG.1601044123'] >>>> [2020-10-01 20:53:22.134536] I [master(worker >>>> /data/storage_a/storage):1991:syncjob] Syncer: Sync Time Taken >>>> duration=0.2159 num_files=3 job=3 return_code=23 >>>> [2020-10-01 20:53:25.615712] I [master(worker >>>> /data/storage_b/storage):1681:crawl] _GMaster: processing xsync >>>> changelog >>>> path=/var/lib/misc/gluster/gsyncd/storage_10.0.231.81_pcic-backup/data-storage_b-storage/xsync/XSYNC-CHANGELOG.1601585563 >>>> >>>> [2020-10-01 20:53:25.634970] W [master(worker >>>> /data/storage_c/storage):1393:process] _GMaster: incomplete sync, >>>> retrying changelogs files=['XSYNC-CHANGELOG.1601585397'] >>>> >>>> GeoReplication status - see it change from Active to Faulty: >>>> >>>> [root@storage01 ~]# gluster volume geo-replication status >>>> >>>> MASTER NODE MASTER VOL MASTER BRICK SLAVE USER >>>> SLAVE SLAVE NODE STATUS >>>> CRAWL STATUS LAST_SYNCED >>>> --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- >>>> >>>> 10.0.231.91 storage /data/storage_a/storage geoaccount >>>> ssh://[email protected]::pcic-backup 10.0.231.81 Active >>>> Changelog Crawl 2020-09-25 07:26:57 >>>> 10.0.231.91 storage /data/storage_c/storage geoaccount >>>> ssh://[email protected]::pcic-backup 10.0.231.82 Active >>>> Hybrid Crawl N/A >>>> 10.0.231.91 storage /data/storage_b/storage geoaccount >>>> ssh://[email protected]::pcic-backup 10.0.231.82 Active >>>> Hybrid Crawl N/A >>>> 10.0.231.92 storage /data/storage_b/storage geoaccount >>>> ssh://[email protected]::pcic-backup 10.0.231.82 Active >>>> History Crawl 2020-09-23 01:56:05 >>>> 10.0.231.92 storage /data/storage_a/storage geoaccount >>>> ssh://[email protected]::pcic-backup 10.0.231.82 Active >>>> Hybrid Crawl N/A >>>> 10.0.231.92 storage /data/storage_c/storage geoaccount >>>> ssh://[email protected]::pcic-backup 10.0.231.81 Active >>>> Hybrid Crawl N/A >>>> 10.0.231.93 storage /data/storage_c/storage geoaccount >>>> ssh://[email protected]::pcic-backup 10.0.231.81 Active >>>> Changelog Crawl 2020-09-25 06:55:57 >>>> 10.0.231.93 storage /data/storage_b/storage geoaccount >>>> ssh://[email protected]::pcic-backup 10.0.231.81 Active >>>> Hybrid Crawl N/A >>>> 10.0.231.93 storage /data/storage_a/storage geoaccount >>>> ssh://[email protected]::pcic-backup 10.0.231.81 Active >>>> Hybrid Crawl N/A >>>> >>>> [root@storage01 ~]# gluster volume geo-replication status >>>> >>>> MASTER NODE MASTER VOL MASTER BRICK SLAVE USER >>>> SLAVE SLAVE NODE STATUS >>>> CRAWL STATUS LAST_SYNCED >>>> --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- >>>> >>>> 10.0.231.91 storage /data/storage_a/storage geoaccount >>>> ssh://[email protected]::pcic-backup 10.0.231.81 Active >>>> Changelog Crawl 2020-09-25 07:26:57 >>>> 10.0.231.91 storage /data/storage_c/storage geoaccount >>>> ssh://[email protected]::pcic-backup 10.0.231.82 Active >>>> Hybrid Crawl N/A >>>> 10.0.231.91 storage /data/storage_b/storage geoaccount >>>> ssh://[email protected]::pcic-backup N/A Faulty >>>> N/A N/A >>>> 10.0.231.92 storage /data/storage_b/storage geoaccount >>>> ssh://[email protected]::pcic-backup 10.0.231.82 Active >>>> History Crawl 2020-09-23 01:58:05 >>>> 10.0.231.92 storage /data/storage_a/storage geoaccount >>>> ssh://[email protected]::pcic-backup 10.0.231.82 Active >>>> Hybrid Crawl N/A >>>> 10.0.231.92 storage /data/storage_c/storage geoaccount >>>> ssh://[email protected]::pcic-backup N/A Faulty >>>> N/A N/A >>>> 10.0.231.93 storage /data/storage_c/storage geoaccount >>>> ssh://[email protected]::pcic-backup 10.0.231.81 Active >>>> Changelog Crawl 2020-09-25 06:58:56 >>>> 10.0.231.93 storage /data/storage_b/storage geoaccount >>>> ssh://[email protected]::pcic-backup 10.0.231.81 Active >>>> Hybrid Crawl N/A >>>> 10.0.231.93 storage /data/storage_a/storage geoaccount >>>> ssh://[email protected]::pcic-backup N/A Faulty >>>> N/A N/A >>>> >>>> >>>> Cluster information: (Note - disabled performance.open-behind to work >>>> around https://github.com/gluster/glusterfs/issues/1440 ) >>>> >>>> [root@storage01 ~]# gluster --version | head -1; cat >>>> /etc/centos-release; uname -r >>>> glusterfs 7.7 >>>> CentOS Linux release 7.8.2003 (Core) >>>> 3.10.0-1127.10.1.el7.x86_64 >>>> >>>> [root@storage01 ~]# df -h /storage2/ >>>> Filesystem Size Used Avail Use% Mounted on >>>> 10.0.231.91:/storage 328T 228T 100T 70% /storage2 >>>> >>>> [root@storage01 ~]# gluster volume info >>>> >>>> Volume Name: storage >>>> Type: Distributed-Replicate >>>> Volume ID: cf94a8f2-324b-40b3-bf72-c3766100ea99 >>>> Status: Started >>>> Snapshot Count: 0 >>>> Number of Bricks: 3 x (2 + 1) = 9 >>>> Transport-type: tcp >>>> Bricks: >>>> Brick1: 10.0.231.91:/data/storage_a/storage >>>> Brick2: 10.0.231.92:/data/storage_b/storage >>>> Brick3: 10.0.231.93:/data/storage_c/storage (arbiter) >>>> Brick4: 10.0.231.92:/data/storage_a/storage >>>> Brick5: 10.0.231.93:/data/storage_b/storage >>>> Brick6: 10.0.231.91:/data/storage_c/storage (arbiter) >>>> Brick7: 10.0.231.93:/data/storage_a/storage >>>> Brick8: 10.0.231.91:/data/storage_b/storage >>>> Brick9: 10.0.231.92:/data/storage_c/storage (arbiter) >>>> Options Reconfigured: >>>> changelog.changelog: on >>>> geo-replication.ignore-pid-check: on >>>> geo-replication.indexing: on >>>> network.ping-timeout: 10 >>>> features.inode-quota: on >>>> features.quota: on >>>> nfs.disable: on >>>> features.quota-deem-statfs: on >>>> storage.fips-mode-rchecksum: on >>>> performance.readdir-ahead: on >>>> performance.parallel-readdir: on >>>> cluster.lookup-optimize: on >>>> client.event-threads: 4 >>>> server.event-threads: 4 >>>> performance.cache-size: 256MB >>>> performance.open-behind: off >>>> >>>> Thanks, >>>> -Matthew >>>> ________ >>>> >>>> >>>> >>>> Community Meeting Calendar: >>>> >>>> Schedule - >>>> Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC >>>> Bridge: https://bluejeans.com/441850968 >>>> >>>> Gluster-users mailing list >>>> [email protected] >>>> https://lists.gluster.org/mailman/listinfo/gluster-users >>> ________ >>> >>> >>> >>> Community Meeting Calendar: >>> >>> Schedule - >>> Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC >>> Bridge: https://bluejeans.com/441850968 >>> >>> Gluster-users mailing list >>> [email protected] >>> https://lists.gluster.org/mailman/listinfo/gluster-users >> >> >> ________ >> >> >> >> Community Meeting Calendar: >> >> Schedule - >> Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC >> Bridge: https://bluejeans.com/441850968 >> >> Gluster-users mailing list >> [email protected] >> https://lists.gluster.org/mailman/listinfo/gluster-users > > ________ > > > > Community Meeting Calendar: > > Schedule - > Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC > Bridge: https://bluejeans.com/441850968 > > Gluster-users mailing list > [email protected] > https://lists.gluster.org/mailman/listinfo/gluster-users
________ Community Meeting Calendar: Schedule - Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC Bridge: https://bluejeans.com/441850968 Gluster-users mailing list [email protected] https://lists.gluster.org/mailman/listinfo/gluster-users
