Hi Nithya, Over the weekend there was a maintenance window and the version of gluster was updated from 5.3 to 5.6, and the entire cluster was rebooted, but the dht xattr is still missing:
[root@gluster07 ~]# getfattr --absolute-names -m . -d -e hex /mnt/raid6-storage/storage/ # file: /mnt/raid6-storage/storage/ security.selinux=0x756e636f6e66696e65645f753a6f626a6563745f723a756e6c6162656c65645f743a733000 trusted.gfid=0x00000000000000000000000000000001 trusted.glusterfs.6f95525a-94d7-4174-bac4-e1a18fe010a2.xtime=0x5d35e1ab000a0ba6 trusted.glusterfs.quota.dirty=0x3000 trusted.glusterfs.quota.size.2=0x00001b6a366e74000000000000763ca3000000000005ce66 trusted.glusterfs.volume-id=0x6f95525a94d74174bac4e1a18fe010a2 [root@gluster07 ~]# rpm -q glusterfs glusterfs-5.6-1.el7.x86_64 [root@gluster07 ~]# uname -r 3.10.0-957.21.3.el7.x86_64 Thanks, -Matthew -- Matthew Benstead System Administrator Pacific Climate Impacts Consortium <https://pacificclimate.org/> University of Victoria, UH1 PO Box 1800, STN CSC Victoria, BC, V8W 2Y2 Phone: +1-250-721-8432 Email: [email protected] On 7/18/19 7:20 AM, Matthew Benstead wrote: > Hi Nithya, > > No - it was added about a year and a half ago. I have tried > re-mounting the volume on the server, but it didn't add the attr: > > [root@gluster07 ~]# umount /storage/ > [root@gluster07 ~]# cat /etc/fstab | grep "/storage" > 10.0.231.56:/storage /storage glusterfs > defaults,log-level=WARNING,backupvolfile-server=10.0.231.51 0 0 > [root@gluster07 ~]# mount /storage/ > [root@gluster07 ~]# df -h /storage/ > Filesystem Size Used Avail Use% Mounted on > 10.0.231.56:/storage 255T 194T 62T 77% /storage > [root@gluster07 ~]# getfattr --absolute-names -m . -d -e hex > /mnt/raid6-storage/storage/ > # file: /mnt/raid6-storage/storage/ > security.selinux=0x756e636f6e66696e65645f753a6f626a6563745f723a756e6c6162656c65645f743a733000 > trusted.gfid=0x00000000000000000000000000000001 > trusted.glusterfs.6f95525a-94d7-4174-bac4-e1a18fe010a2.xtime=0x5d307baa00023ec0 > trusted.glusterfs.quota.dirty=0x3000 > trusted.glusterfs.quota.size.2=0x00001b71d5279e000000000000763e32000000000005cd53 > trusted.glusterfs.volume-id=0x6f95525a94d74174bac4e1a18fe010a2 > > Thanks, > -Matthew > > On 7/17/19 10:04 PM, Nithya Balachandran wrote: >> Hi Matthew, >> >> Was this node/brick added to the volume recently? If yes, try >> mounting the volume on a fresh mount point - that should create the >> xattr on this as well. >> >> Regards, >> Nithya >> >> On Wed, 17 Jul 2019 at 21:01, Matthew Benstead <[email protected] >> <mailto:[email protected]>> wrote: >> >> Hello, >> >> I've just noticed one brick in my 7 node distribute volume is missing >> the trusted.glusterfs.dht xattr...? How can I fix this? >> >> I'm running glusterfs-5.3-2.el7.x86_64 on CentOS 7. >> >> All of the other nodes are fine, but gluster07 from the list >> below does >> not have the attribute. >> >> $ ansible -i hosts gluster-servers[0:6] ... -m shell -a "getfattr >> -m . >> --absolute-names -n trusted.glusterfs.dht -e hex >> /mnt/raid6-storage/storage" >> ... >> gluster05 | SUCCESS | rc=0 >> >> # file: /mnt/raid6-storage/storage >> trusted.glusterfs.dht=0x0000000100000000000000002aaaaaa9 >> >> gluster03 | SUCCESS | rc=0 >> >> # file: /mnt/raid6-storage/storage >> trusted.glusterfs.dht=0x0000000100000000aaaaaaa8d5555551 >> >> gluster04 | SUCCESS | rc=0 >> >> # file: /mnt/raid6-storage/storage >> trusted.glusterfs.dht=0x0000000100000000d5555552ffffffff >> >> gluster06 | SUCCESS | rc=0 >> >> # file: /mnt/raid6-storage/storage >> trusted.glusterfs.dht=0x00000001000000002aaaaaaa55555553 >> >> gluster02 | SUCCESS | rc=0 >> >> # file: /mnt/raid6-storage/storage >> trusted.glusterfs.dht=0x00000001000000007ffffffeaaaaaaa7 >> >> gluster07 | FAILED | rc=1 >> >> /mnt/raid6-storage/storage: trusted.glusterfs.dht: No such >> attributenon-zero return code >> >> gluster01 | SUCCESS | rc=0 >> >> # file: /mnt/raid6-storage/storage >> trusted.glusterfs.dht=0x0000000100000000555555547ffffffd >> >> Here are all of the attr's from the brick: >> >> [root@gluster07 ~]# getfattr --absolute-names -m . -d -e hex >> /mnt/raid6-storage/storage/ >> # file: /mnt/raid6-storage/storage/ >> >> security.selinux=0x756e636f6e66696e65645f753a6f626a6563745f723a756e6c6162656c65645f743a733000 >> trusted.gfid=0x00000000000000000000000000000001 >> >> trusted.glusterfs.6f95525a-94d7-4174-bac4-e1a18fe010a2.xtime=0x5d2dee800001fdf9 >> trusted.glusterfs.quota.dirty=0x3000 >> >> trusted.glusterfs.quota.size.2=0x00001b69498a1400000000000076332e000000000005cd03 >> trusted.glusterfs.volume-id=0x6f95525a94d74174bac4e1a18fe010a2 >> >> >> And here is the volume information: >> >> [root@gluster07 ~]# gluster volume info storage >> >> Volume Name: storage >> Type: Distribute >> Volume ID: 6f95525a-94d7-4174-bac4-e1a18fe010a2 >> Status: Started >> Snapshot Count: 0 >> Number of Bricks: 7 >> Transport-type: tcp >> Bricks: >> Brick1: 10.0.231.50:/mnt/raid6-storage/storage >> Brick2: 10.0.231.51:/mnt/raid6-storage/storage >> Brick3: 10.0.231.52:/mnt/raid6-storage/storage >> Brick4: 10.0.231.53:/mnt/raid6-storage/storage >> Brick5: 10.0.231.54:/mnt/raid6-storage/storage >> Brick6: 10.0.231.55:/mnt/raid6-storage/storage >> Brick7: 10.0.231.56:/mnt/raid6-storage/storage >> Options Reconfigured: >> changelog.changelog: on >> features.quota-deem-statfs: on >> features.read-only: off >> features.inode-quota: on >> features.quota: on >> performance.readdir-ahead: on >> nfs.disable: on >> geo-replication.indexing: on >> geo-replication.ignore-pid-check: on >> transport.address-family: inet >> >> Thanks, >> -Matthew >> _______________________________________________ >> Gluster-users mailing list >> [email protected] <mailto:[email protected]> >> https://lists.gluster.org/mailman/listinfo/gluster-users >> >
_______________________________________________ Gluster-users mailing list [email protected] https://lists.gluster.org/mailman/listinfo/gluster-users
