Hey Davide -- You can use mdns-scan to see what's advertised by zeroconf/bonjour/avahi.
Normally if the shares are broadcast by zeroconf, you would see them in Nautilus automatically. Are any other computers/devices successfully connecting? Kind regards, travis On 23/03/2020 10:28, Davide Giannella via GLLUG wrote: > On 21/03/2020 22:42, John Hearns wrote: >> Connect the Lacie to your home router. >> >> Connect the ethernet port on your USB-C adapter to the home router. >> Switch off the wireless interface on your laptop. >> Bring up the ethernet interface. >> You can either log into your wireless router web interface and display >> what devices are attached >> Or pin the broadcast address of the subnet - which is usually >> 192.168.1.255 >> You should then find your Lacie device and be talking to it at >> whatever the line speed is on your router ethernet ports. >> Hopefully gigabit. > +1 > thanks again. > Will post once solved. I will look as well in the zeroconf/bojour > approach. Just for the sake of exercise and learning. > > D. > > -- ****** Travis Mooney-Evans [email protected] +447908631440 Skype: ttmooney -- GLLUG mailing list [email protected] https://mailman.lug.org.uk/mailman/listinfo/gllug
