Hello,
when applying the mail below (without the '> ' prefix) using git am
--scissors the result looks like:
$ git show
commit 26ef0606927cc1979faa4166d7f9f3584b5cdc61
Author: Tony Lindgren <t...@atomide.com>
Date: Tue Oct 6 05:36:17 2015 -0700
memory: omap-gpmc: Fix unselectable debug option for GPMC
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Commit 63aa945b1013 ("memory: omap-gpmc: Add Kconfig option for
debug")
added a debug option for GPMC, but somehow managed to keep it
unselectable.
[...]
$ git version
git version 2.6.0
The obvious improvement is to strip all headers like git am does without
--scissors.
If someone wants a bounce of the original mail, just ask per PM.
Best regards
Uwe
On Wed, Oct 07, 2015 at 03:41:19AM -0700, Tony Lindgren wrote:
> * Uwe Kleine-König <u.kleine-koe...@pengutronix.de> [151007 00:57]:
> > On Wed, Oct 07, 2015 at 10:45:50AM +0300, Roger Quadros wrote:
> > >
> > > How about this instead?
> > >
> > > NOTE: Apart from matching the register setup with the bootloader you also
> > > need to
> > > match the GPMC FCLK frequency used by the bootloader else the GPMC timings
> > > won't be identical with the bootloader timings.
> > Yeah, sounds better, thanks.
> >
> > > Also you might need to build this patch on top of
> > > http://article.gmane.org/gmane.linux.kernel/2054796
> > I talked to Tony about this patch yesterday on irc, but I didn't find it
> > in the archives yet when I sent my mail.
>
> Yes sorry here's a repost with your and Roger's changes folded in and
> edited a bit. Probably best to keep them together with this patch.
>
> Does the following look OK to you guys?
>
> Regards,
>
> Tony
>
> 8< ----------------
> From: Tony Lindgren <t...@atomide.com>
> Date: Tue, 6 Oct 2015 05:36:17 -0700
> Subject: [PATCH] memory: omap-gpmc: Fix unselectable debug option for GPMC
> MIME-Version: 1.0
> Content-Type: text/plain; charset=UTF-8
> Content-Transfer-Encoding: 8bit
>
> Commit 63aa945b1013 ("memory: omap-gpmc: Add Kconfig option for debug")
> added a debug option for GPMC, but somehow managed to keep it unselectable.
>
> This probably happened because I had some uncommitted changes and the
> GPMC option is selected in the platform specific Kconfig.
>
> Let's also update the description a bit, it does not mention that
> enabling the debug option also disables the reset of GPMC controller
> during the init as pointed out by Uwe Kleine-König
> <u.kleine-koe...@pengutronix.de> and Roger Quadros <rog...@ti.com>.
>
> Fixes: 63aa945b1013 ("memory: omap-gpmc: Add Kconfig option for debug")
> Reported-by: Uwe Kleine-König <u.kleine-koe...@pengutronix.de>
> Signed-off-by: Tony Lindgren <t...@atomide.com>
>
> --- a/drivers/memory/Kconfig
> +++ b/drivers/memory/Kconfig
> @@ -58,12 +58,18 @@ config OMAP_GPMC
> memory drives like NOR, NAND, OneNAND, SRAM.
>
> config OMAP_GPMC_DEBUG
> - bool
> + bool "Enable GPMC debug output and skip reset of GPMC during init"
> depends on OMAP_GPMC
> help
> Enables verbose debugging mostly to decode the bootloader provided
> - timings. Enable this during development to configure devices
> - connected to the GPMC bus.
> + timings. To preserve the bootloader provided timings, the reset
> + of GPMC is skipped during init. Enable this during development to
> + configure devices connected to the GPMC bus.
> +
> + NOTE: In addition to matching the register setup with the bootloader
> + you also need to match the GPMC FCLK frequency used by the
> + bootloader or else the GPMC timings won't be identical with the
> + bootloader timings.
>
> config MVEBU_DEVBUS
> bool "Marvell EBU Device Bus Controller"
>
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | http://www.pengutronix.de/ |
--
To unsubscribe from this list: send the line "unsubscribe git" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
