On Fri, Mar 13, 2015 at 2:18 PM, Sudhanshu Shekhar
<[email protected]> wrote:
> Add following test cases:
> 1) Confirm error message when git reset is used with no previous branch
> 2) Confirm git reset - works like git reset @{-1}
> 3) Confirm "-" is always treated as a commit unless the -- file option
> is specified
> 4) Confirm "git reset -" works normally even when a file named @{-1} is
> present
>
> Helped-by: Eric Sunshine <[email protected]>
> Helped-by: Matthieu Moy <[email protected]>
> Helped-by: David Aguilar <[email protected]>
> Signed-off-by: Sudhanshu Shekhar <[email protected]>
> ---
> Eric: Thank you for pointing out the mistake. The '&&' after the Here
> Docs was causing the issue. I have removed the concatenation from
> there, hope that's okay.
The && needs to go on the first line, not the last line of the here-doc.
However, that was not my main concern in the previous review. What
disturbed me was that the new tests, which were supposed to be
checking if "-" behaved as @{-1}, were succeeding even without patch
1/2 applied which implemented the "-" alias for @{-1}. That seems
wrong. I don't think you particularly addressed that issue in this
version (even though the first couple tests will now fail without 1/2
due to the changed error message).
> Regarding the @{-1} test case, I created it as a check for Junio's
> comment on the error message generated by "git reset -" when a file
> named @{-1} is there. Since, in this situation "git reset @{-1}" will
> return an error (but "reset -" shouldn't).
Reminder: Wrap commentary to about column 72, as you would the commit
message. (I re-wrapped it manually to reply to it.)
> I have renamed the folder to 'dash' as suggested by you, keeping the
> old name only where it made sense.
Considering that the test titles already tell us the intent of the
tests, I don't find that the directory name "no_previous" adds much
value to tests checking the behavior of "-" with no previous branch. A
single, consistent name used throughout all these tests would be less
surprising and place smaller cognitive load on the reader.
More below.
> diff --git a/t/t7102-reset.sh b/t/t7102-reset.sh
> index 98bcfe2..18523c1 100755
> --- a/t/t7102-reset.sh
> +++ b/t/t7102-reset.sh
> @@ -568,4 +568,162 @@ test_expect_success 'reset --mixed sets up work tree' '
> test_cmp expect actual
> '
>
> +test_expect_success 'reset - with no previous branch fails' '
> + git init no_previous &&
> + test_when_finished rm -rf no_previous &&
> + (
> + cd no_previous &&
> + test_must_fail git reset - 2>actual
> + ) &&
> + test_i18ngrep "ambiguous argument" no_previous/actual
> +'
> +
> +test_expect_success 'reset - while having file named - and no previous
> branch fails' '
> + git init no_previous &&
> + test_when_finished rm -rf no_previous &&
> + (
> + cd no_previous &&
> + >- &&
> + test_must_fail git reset - 2>actual
> + ) &&
> + test_i18ngrep "ambiguous argument" no_previous/actual
> +'
> +
> +
Style: Unnecessary extra blank line.
> +test_expect_success \
> + 'reset - in the presence of file named - with previous branch resets
> commit' '
> + cat >expect <<-EOF
Place the && at the end of this line. Also, prefix EOF with a
backslash to indicate that you don't intend any interpolation to occur
within the here-doc. So:
cat >expect <<-\EOF &&
Ditto for the remaining tests.
> + Unstaged changes after reset:
> + M -
> + M file
> + EOF
> + git init dash &&
> + test_when_finished rm -rf dash &&
> + (
> + cd dash &&
> + >- &&
> + >file &&
> + git add file - &&
> + git commit -m "add base files" &&
> + git checkout -b new_branch &&
> + echo "random" >- &&
> + echo "wow" >file &&
> + git add file - &&
> + git reset - >../actual
> + ) &&
> + test_cmp expect actual
> +'
> +test_expect_success \
> + 'reset - in the presence of file named - with -- option resets
> commit' '
> + cat >expect <<-EOF
> + Unstaged changes after reset:
> + M -
> + M file
> + EOF
> + git init dash &&
> + test_when_finished rm -rf dash &&
> + (
> + cd dash &&
> + >- &&
> + >file &&
> + git add file - &&
> + git commit -m "add base files" &&
> + git checkout -b new_branch &&
> + echo "random" >- &&
> + echo "wow" >file &&
> + git add file - &&
> + git reset - -- >../actual
> + ) &&
> + test_cmp expect actual
> +'
> +
> +test_expect_success 'reset - in the presence of file named - with -- file
> option resets file' '
> + cat >expect <<-EOF
> + Unstaged changes after reset:
> + M -
> + EOF
> + git init dash &&
> + test_when_finished rm -rf dash &&
> + (
> + cd dash &&
> + >- &&
> + >file &&
> + git add file - &&
> + git commit -m "add base files" &&
> + git checkout -b new_branch &&
> + echo "random" >- &&
> + echo "wow" >file &&
> + git add file - &&
> + git reset -- - >../actual
> + ) &&
> + test_cmp expect actual
> +'
> +test_expect_success \
> + 'reset - in the presence of file named - with both pre and post --
> option resets file' '
> + cat >expect <<-EOF
> + Unstaged changes after reset:
> + M -
> + EOF
> + git init dash &&
> + test_when_finished rm -rf dash &&
> + (
> + cd dash &&
> + >- &&
> + >file &&
> + git add file - &&
> + git commit -m "add base files" &&
> + git checkout -b new_branch &&
> + echo "random" >- &&
> + echo "wow" >file &&
> + git add file - &&
> + git reset - -- - >../actual
> + ) &&
> + test_cmp expect actual
> +'
> +
> +test_expect_success 'reset - works same as reset @{-1}' '
> + git init dash &&
> + test_when_finished rm -rf dash &&
> + (
> + cd dash &&
> + echo "file1" >file1 &&
> + git add file1 &&
> + git commit -m "base commit" &&
> + git checkout -b temp &&
> + echo "new file" >file &&
> + git add file &&
> + git commit -m "added file" &&
> + git reset - &&
> + git status --porcelain >../actual &&
> + git add file &&
> + git commit -m "added file" &&
> + git reset @{-1} &&
> + git status --porcelain >../expect
> + ) &&
> + test_cmp expect actual
> +'
> +
> +test_expect_success 'reset - with file named @{-1} succeeds' '
> + cat >expect <<-EOF
> + Unstaged changes after reset:
> + M @{-1}
> + M file
> + EOF
> + git init dash &&
> + test_when_finished rm -rf dash &&
> + (
> + cd dash &&
> + echo "random" >@{-1} &&
> + echo "random" >file &&
> + git add @{-1} file &&
> + git commit -m "base commit" &&
> + git checkout -b new_branch &&
> + echo "additional stuff" >>file &&
> + echo "additional stuff" >>@{-1} &&
> + git add file @{-1} &&
> + git reset - >../actual
> + ) &&
> + test_cmp expect actual
> +'
> +
> test_done
> --
> 2.3.1.277.gd67f9d5.dirty
--
To unsubscribe from this list: send the line "unsubscribe git" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
