Il giorno sab, 23/03/2019 alle 15.34 -0400, Randall S. Becker ha
scritto:
> On March 23, 2019 9:00, Fabio Aiuto wrote:
> > To: Randall S. Becker <rsbec...@nexbridge.com>; git@vger.kernel.org
> > Subject: Re: Semantic errors
> >
> > Il giorno ven, 22/03/2019 alle 18.43 -0400, Randall S. Becker ha
> > scritto:
> > > > -----Original Message-----
> > > > From: Fabio Aiuto <polinic...@libero.it>
> > > > Sent: March 22, 2019 17:41
> > > > To: Randall S. Becker <rsbec...@nexbridge.com>; git@vger.kernel
> > > > .org
> > > > Subject: Re: Semantic errors
> > > >
> > > > Il giorno ven, 22/03/2019 alle 17.39 -0400, Randall S. Becker
> > > > ha
> > > > scritto:
> > > > > On March 22, 2019 17:25, Fabio Aiuto
> > > > > > Il giorno gio, 21/03/2019 alle 17.03 -0400, Randall S.
> > > > > > Becker ha
> > > > > > scritto:
> > > > > > > > Of On March 21, 2019 15:32, Fabio Aiuto wrote:
> > > > > > > > Il giorno gio, 21/03/2019 alle 15.16 -0400, Randall S.
> > > > > > > > Becker ha
> > > > > > > > scritto:
> > > > > > > > > On March 21, 2019 15:06, Fabio Aiuto wrote:
> > > > > > > > > > I'm browsins git code with Eclipse. I'm on a local
> > > > > > > > > > branch called "studio" based on master (last public
> > > > > > > > > > commit e902e9b by Junio C Hamano on Monday March 11
> > > > > > > > > > 2019). I've built everything by
> > > > > > > > > > changing:
> > > > > > > > > > CFLAGS = -g -Wall (removing -O2 to have smooth
> > > > > > > > > > trace in
> > > > > > > > > > debugging).
> > > > > > > > > > But the environment detects the following semantic
> > > > > > > > > > errors (I made no
> > > > > > > > > > edits!!!):
> > > > > > > > > > Description Resource Path Loca
> > > > > > > > > > tion
> > > > > > > > > > Type
> > > > > > > > > > Symbol 'GIT_HTML_PATH' could not be resolved
> > > > > > > > > > git
> > > > > > > > > > .c
> > > > > > > > > > /g
> > > > > > > > > > it
> > > > > > > > > > line 154 Semantic Error
> > > > > > > > > > Symbol 'GIT_MAN_PATH' could not be resolved
> > > > > > > > > > git.
> > > > > > > > > > c
> > > > > > > > > > /gi
> > > > > > > > > > t
> > > > > > > > > > line 158 Semantic Error
> > > > > > > > > > Symbol 'GIT_INFO_PATH' could not be resolved
> > > > > > > > > > git
> > > > > > > > > > .c
> > > > > > > > > > /g
> > > > > > > > > > it
> > > > > > > > > > line 162 Semantic Error
> > > > > > > > > > Symbol 'active_cache' could not be resolved
> > > > > > > > > > comm
> > > > > > > > > > it.c
> > > > > > > > > > /git
> > > > > > > > > > /builtin line 899 Semantic Error
> > > > > > > > > > Field 'ce_intent_to_add(active_cache[i])' could not
> > > > > > > > > > be
> > > > > > > > > > resolved
> > > > > > > > > > commit.c /git/builtin line 899
> > > > > > > > > > Sem
> > > > > > > > > > anti
> > > > > > > > > > c
> > > > > > > > > > Error
> > > > > > > > > > Symbol 'active_nr' could not be resolved com
> > > > > > > > > > mit.
> > > > > > > > > > c
> > > > > > > > > > /gi
> > > > > > > > > > t/bu
> > > > > > > > > > iltin line 889 Semantic Error
> > > > > > > > > > Symbol 'active_nr' could not be resolved com
> > > > > > > > > > mit.
> > > > > > > > > > c
> > > > > > > > > > /gi
> > > > > > > > > > t/bu
> > > > > > > > > > iltin line 898 Semantic Error
> > > > > > > > > > Field 'oid' could not be resolved commit.c
> > > > > > > > > > /g
> > > > > > > > > > it/b
> > > > > > > > > > uilt
> > > > > > > > > > in
> > > > > > > > > > line 1654 Semantic Error
> > > > > > > > > > Symbol 'active_nr' could not be resolved com
> > > > > > > > > > mit.
> > > > > > > > > > c
> > > > > > > > > > /gi
> > > > > > > > > > t/bu
> > > > > > > > > > iltin line 901 Semantic Error
> > > > > > > > > > Symbol 'active_cache_tree' could not be resolved
> > > > > > > > > > com
> > > > > > > > > > mit.
> > > > > > > > > > c
> > > > > > > > > > /git/builtin line 1654 Semantic Error
> > > > > > > > > > Symbol 'active_cache_changed' could not be resolved
> > > > > > > > > > comm
> > > > > > > > > > it.c
> > > > > > > > > > /git/builtin line 418 Semantic Error
> > > > > > > > > > Symbol 'active_cache_tree' could not be resolved
> > > > > > > > > > com
> > > > > > > > > > mit.
> > > > > > > > > > c
> > > > > > > > > > /git/builtin line 419 Semantic Error
> > > > > > > > > > Symbol 'active_nr' could not be resolved com
> > > > > > > > > > mit.
> > > > > > > > > > c
> > > > > > > > > > /gi
> > > > > > > > > > t/bu
> > > > > > > > > > iltin line 254 Semantic Error
> > > > > > > > > > Symbol 'active_cache' could not be resolved
> > > > > > > > > > comm
> > > > > > > > > > it.c
> > > > > > > > > > /git
> > > > > > > > > > /builtin line 255 Semantic Error
> > > > > > > > > >
> > > > > > > > > > I can debug without problems, but what if I should
> > > > > > > > > > trece
> > > > > > > > > > through one of those errors?
> > > > > > > > > > How can I fix them?
> > > > > > > > >
> > > > > > > > > This situation occurs in many projects in ECLIPSE,
> > > > > > > > > not
> > > > > > > > > only git.
> > > > > > > > > The
> > > > > > > > > errors are likely coming from one of the error
> > > > > > > > > parsers
> > > > > > > > > that you have enabled in your workspace. Look in the
> > > > > > > > > Project Properties or Workspace Preferences under
> > > > > > > > > C/C++
> > > > > > > > > Build/Settings in the Error Parsers tab for your
> > > > > > > > > build
> > > > > > > > > configuration.
> > > > > > > > > You may
> > > > > > > > > have to turn off some of those.
> > > > > > > > > There is also the C/C++ General/Code Analysis
> > > > > > > > > Preferences
> > > > > > > > > setting where you might have to turn off the
> > > > > > > > > problematic
> > > > > > > > > errors. I have found that this is a common situation
> > > > > > > > > for
> > > > > > > > > code that is imported into ECLIPSE from other
> > > > > > > > > platforms,
> > > > > > > > > where the GNU error and analysis tools are overly
> > > > > > > > > aggressive by default.
> > > > > > > > >
> > > > > > > > > Good luck.
> > > > > > > > > Randall
> > > > > > > > >
> > > > > > > > > -- Brief whoami:
> > > > > > > > > NonStop developer since approximately
> > > > > > > > > 211288444200000000
> > > > > > > > > UNIX developer since approximately 421664400
> > > > > > > > > -- In my real life, I talk too much.
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > > > Thank you I tried to disable all of them, but they all
> > > > > > > > remain.
> > > > > > > > For
> > > > > > > > example the variable 'active_nr' is actually never
> > > > > > > > declared.
> > > > > > > > That's
> > > > > > > > so strange.
> > > > > > > > Hope to
> > > > > > > > solve this all soon. I'm freezed...
> > > > > > >
> > > > > > > It is very likely in ECLIPSE either in workstation or
> > > > > > > project
> > > > > > > settings relating to error parsers (turn everything off).
> > > > > > > It
> > > > > > > still may be an error parser issue. One key thing... do
> > > > > > > not
> > > > > > > use -Wall.
> > > > > > > There are also settings about what to do in some error
> > > > > > > conditions configured in ECLIPSE. -Wall could be probably
> > > > > > > triggering a response from one of the error parsers. But
> > > > > > > the
> > > > > > > Semantic Error type is not normally from the compiler;
> > > > > > > rather,
> > > > > > > it is from ECLIPSE CDT pre- scanning the code. Anyway,
> > > > > > > check
> > > > > > > out other -W settings to disable all warnings as a start.
> > > > > > > If
> > > > > > > you are building in Cygwin or Mingw, you probably can
> > > > > > > ignore
> > > > > > > the ECLIPSE errors, especially if git actually built. If
> > > > > > > you
> > > > > > > are trying to mix a managed build and a non-managed build
> > > > > > > in
> > > > > > > the same project, you are going to be out of luck.
> > > > > > >
> > > > > >
> > > > > > If I run a make inside the git working directory, this will
> > > > > > just
> > > > > > create binaries in the working directory. But in my
> > > > > > home/{myname}/bin/ I have found the following files:
> > > > > >
> > > > > > git git-cvsserver gitk git-receive-pack git-shell git-
> > > > > > upload-
> > > > > > archive git-upload- pack
> > > > > >
> > > > > > Maybe they are deployed by a make install I run
> > > > > > accidentally (I
> > > > > > think that's possible). How could I clean the effect of
> > > > > > this
> > > > > > accidental install?
> > > > > > If I don't
> > > > > > clean this install could I have problems in the future?
> > > > >
> > > > > I haven't done a Windows build so I really can't help here.
> > > > > Anyone
> > > > > else able to chime in?
> > > > >
> > > >
> > > > I'm on debian stretch.
> > >
> > > Unless /home/{yourname}/bin is on your PATH, the make install
> > > should
> > > not cause a problem and cleaning up from it probably is fine. I'm
> > > surprised there is no /home/{yourname}/share also because make
> > > install
> > > will move man pages into it - although you might not have all of
> > > the
> > > man pages installed (that is another topic and make target - my
> > > platform does not have a port of the Asciidoctor tool, so I can't
> > > build git man pages, so I use quick-install-man, which depends on
> > > having a clone of the man page repository that the really awesome
> > > git
> > > team creates). It might be helpful to specify some of the option
> > > defines described in the Makefile so that the install goes to the
> > > proper place (like /usr/local). Run 'uname -s' to figure out
> > > which
> > > system type config.mak.uname is going to use, and go from there.
> > >
> > > Good luck.
> > >
> > > Randall
> > >
> > > -- Brief whoami:
> > > NonStop developer since approximately 211288444200000000
> > > UNIX developer since approximately 421664400
> > > -- In my real life, I talk too much.
> > >
> > >
> > >
> >
> > I found in the Makefile:
> >
> > ...
> >
> > prefix = $(HOME)
> > bindir = $(prefix)/bin <--- delete the whole home/fabio/bin mandir
> > =
> > $(prefix)/share/man <--- delete infodir = $(prefix)/share/info <
> > --- delete
> > gitexecdir = libexec/git-core <---- delete mergetoolsdir =
> > $(gitexecdir)/mergetools <---not present sharedir = $(prefix)/share
> > <---
> > delete gitwebdir = $(sharedir)/gitweb <--- delete perllibdir =
> > $(sharedir)/perl5
> > <--- delete localedir = $(sharedir)/locale <--- delete template_dir
> > = share/git-
> > core/templates <--- delete htmldir = $(prefix)/share/doc/git-doc <-
> > -- not
> > present
> > ETC_GITCONFIG = $(sysconfdir)/gitconfig <--- in my /etc there's
> > no
> > gitconfig
> > ETC_GITATTRIBUTES = $(sysconfdir)/gitattributes <--- in my /etc
> > there's no
> > gitattributes lib = lib # DESTDIR = pathsep = :
> >
> > bindir_relative = $(patsubst $(prefix)/%,%,$(bindir))
> > mandir_relative =
> > $(patsubst $(prefix)/%,%,$(mandir)) infodir_relative = $(patsubst
> > $(prefix)/%,%,$(infodir)) gitexecdir_relative = $(patsubst
> > $(prefix)/%,%,$(gitexecdir)) localedir_relative = $(patsubst
> > $(prefix)/%,%,$(localedir)) htmldir_relative = $(patsubst
> > $(prefix)/%,%,$(htmldir)) perllibdir_relative = $(patsubst
> > $(prefix)/%,%,$(perllibdir))
> >
> > ...
> >
> > so by deleting all this stuff should be everything good, shouldn't
> > it?
> > Please let me know if there should be anything else to know.
>
> Your path, being
> PATH=~/bin:/home/{myname}/bin:/usr/local/bin:/usr/bin:/bin:/usr/local
> /g
> ames:/usr/games:/usr/sbin:/sbin
> puts your own bin in front of where the system-defined git would be
> located. So yes, the new install will interfere. As long as you
> remove the git install from ~/bin and /home/{myname}/bin (are these
> not the same?), you should go back to using the system's git.
>
Thank you Randall, I wonder if it's due to that install that I have
these first wo entries in my PATH environment variable. If I create a
new user I don't have any entries pointing at home/{username}. Maybe
it's impossible to know (I've found nothing related in the Makefile).
Does install command set the environment variables with the specified
install paths?
Thank you.
Fabio.
