Remove the rebase.useBuiltin setting, which was added as an escape
hatch to disable the builtin version of rebase first released with Git
2.20.
See [1] for the initial implementation of rebase.useBuiltin, and [2]
and [3] for the documentation and corresponding
GIT_TEST_REBASE_USE_BUILTIN option.
As noted in [4] the test suite hasn't passed with
GIT_TEST_REBASE_USE_BUILTIN=false since c762aada1a ("rebase -x: sanity
check command", 2019-01-29). We could fix this as we did for another
such bug in 7e097e27d3 ("legacy-rebase: backport -C<n> and
--whitespace=<option> checks", 2018-11-20), or just decide that the
built-in version is stable enough, and remove the legacy version. This
patch implements that removal of the legacy version.
1. 55071ea248 ("rebase: start implementing it as a builtin",
2018-08-07)
2. d8d0a546f0 ("rebase doc: document rebase.useBuiltin", 2018-11-14)
3. 62c23938fa ("tests: add a special setup where rebase.useBuiltin is
off", 2018-11-14)
4. https://public-inbox.org/git/87ftsrke6r....@evledraar.gmail.com/
---
On Wed, Feb 13 2019, Ævar Arnfjörð Bjarmason wrote:
> On Tue, Jan 29 2019, Phillip Wood wrote:
>> [...]
>> test_expect_success 'rebase -i with exec of inexistent command' '
>> git checkout master &&
>> test_when_finished "git rebase --abort" &&
>
> This patch breaks the test suite (with these two new tests) under
> GIT_TEST_REBASE_USE_BUILTIN=false. So a 2.21.0-rc0 regression.
>
> It would have been better to raise this before the rc period, but I just
> noticed this now, but we can now:
>
> 1. Skip the test under that mode
> 2. Fix the shell code to do the same thing
> 3. Just remove the shell code & GIT_TEST_REBASE_USE_BUILTIN=false mode
>
> Maybe we should just do #3. The reason for the escape hatch was in case
> we had bugs, and now we've had a full release cycle, but maybe that's
> too early...
Here is approach #3, intended for 2.21, but I'll defer to Junio on
whether we should take that approach.
Documentation/config/rebase.txt | 17 +-
Makefile | 1 -
builtin/rebase.c | 17 +-
git-legacy-rebase.sh | 770 --------------------------------
t/README | 4 -
t/t3400-rebase.sh | 6 +
6 files changed, 13 insertions(+), 802 deletions(-)
delete mode 100755 git-legacy-rebase.sh
diff --git a/Documentation/config/rebase.txt b/Documentation/config/rebase.txt
index 331d250e04..c747452983 100644
--- a/Documentation/config/rebase.txt
+++ b/Documentation/config/rebase.txt
@@ -1,16 +1,9 @@
rebase.useBuiltin::
- Set to `false` to use the legacy shellscript implementation of
- linkgit:git-rebase[1]. Is `true` by default, which means use
- the built-in rewrite of it in C.
-+
-The C rewrite is first included with Git version 2.20. This option
-serves an an escape hatch to re-enable the legacy version in case any
-bugs are found in the rewrite. This option and the shellscript version
-of linkgit:git-rebase[1] will be removed in some future release.
-+
-If you find some reason to set this option to `false` other than
-one-off testing you should report the behavior difference as a bug in
-git.
+ Unused configuration variable. Used between Git version 2.20
+ and 2.21 as an escape hatch to enable the legacy shellscript
+ implementation of rebase. Now the built-in rewrite of it in C
+ is always used. Setting this will emit a warning, to alert any
+ remaining users that setting this now does nothing.
rebase.stat::
Whether to show a diffstat of what changed upstream since the last
diff --git a/Makefile b/Makefile
index 0e13a5b469..58dceccd8a 100644
--- a/Makefile
+++ b/Makefile
@@ -626,7 +626,6 @@ SCRIPT_SH += git-merge-one-file.sh
SCRIPT_SH += git-merge-resolve.sh
SCRIPT_SH += git-mergetool.sh
SCRIPT_SH += git-quiltimport.sh
-SCRIPT_SH += git-legacy-rebase.sh
SCRIPT_SH += git-remote-testgit.sh
SCRIPT_SH += git-request-pull.sh
SCRIPT_SH += git-stash.sh
diff --git a/builtin/rebase.c b/builtin/rebase.c
index 7c7bc13e91..37a036933d 100644
--- a/builtin/rebase.c
+++ b/builtin/rebase.c
@@ -1135,21 +1135,8 @@ int cmd_rebase(int argc, const char **argv, const char
*prefix)
};
int i;
- /*
- * NEEDSWORK: Once the builtin rebase has been tested enough
- * and git-legacy-rebase.sh is retired to contrib/, this preamble
- * can be removed.
- */
-
- if (!use_builtin_rebase()) {
- const char *path = mkpath("%s/git-legacy-rebase",
- git_exec_path());
-
- if (sane_execvp(path, (char **)argv) < 0)
- die_errno(_("could not exec %s"), path);
- else
- BUG("sane_execvp() returned???");
- }
+ if (!use_builtin_rebase())
+ warning(_("The rebase.useBuiltin support has been removed!"));
if (argc == 2 && !strcmp(argv[1], "-h"))
usage_with_options(builtin_rebase_usage,
diff --git a/git-legacy-rebase.sh b/git-legacy-rebase.sh
deleted file mode 100755
index 5c2c4e5276..0000000000
--- a/git-legacy-rebase.sh
+++ /dev/null
@@ -1,770 +0,0 @@
-#!/bin/sh
-#
-# Copyright (c) 2005 Junio C Hamano.
-#
-
-SUBDIRECTORY_OK=Yes
-OPTIONS_KEEPDASHDASH=
-OPTIONS_STUCKLONG=t
-OPTIONS_SPEC="\
-git rebase [-i] [options] [--exec <cmd>] [--onto <newbase>] [<upstream>]
[<branch>]
-git rebase [-i] [options] [--exec <cmd>] [--onto <newbase>] --root [<branch>]
-git rebase --continue | --abort | --skip | --edit-todo
---
- Available options are
-v,verbose! display a diffstat of what changed upstream
-q,quiet! be quiet. implies --no-stat
-autostash automatically stash/stash pop before and after
-fork-point use 'merge-base --fork-point' to refine upstream
-onto=! rebase onto given branch instead of upstream
-r,rebase-merges? try to rebase merges instead of skipping them
-p,preserve-merges! try to recreate merges instead of ignoring them
-s,strategy=! use the given merge strategy
-X,strategy-option=! pass the argument through to the merge strategy
-no-ff! cherry-pick all commits, even if unchanged
-f,force-rebase! cherry-pick all commits, even if unchanged
-m,merge! use merging strategies to rebase
-i,interactive! let the user edit the list of commits to rebase
-x,exec=! add exec lines after each commit of the editable list
-k,keep-empty preserve empty commits during rebase
-allow-empty-message allow rebasing commits with empty messages
-stat! display a diffstat of what changed upstream
-n,no-stat! do not show diffstat of what changed upstream
-verify allow pre-rebase hook to run
-rerere-autoupdate allow rerere to update index with resolved conflicts
-root! rebase all reachable commits up to the root(s)
-autosquash move commits that begin with squash!/fixup! under -i
-signoff add a Signed-off-by: line to each commit
-committer-date-is-author-date! passed to 'git am'
-ignore-date! passed to 'git am'
-whitespace=! passed to 'git apply'
-ignore-whitespace! passed to 'git apply'
-C=! passed to 'git apply'
-S,gpg-sign? GPG-sign commits
- Actions:
-continue! continue
-abort! abort and check out the original branch
-skip! skip current patch and continue
-edit-todo! edit the todo list during an interactive rebase
-quit! abort but keep HEAD where it is
-show-current-patch! show the patch file being applied or merged
-reschedule-failed-exec automatically reschedule failed exec commands
-"
-. git-sh-setup
-set_reflog_action rebase
-require_work_tree_exists
-cd_to_toplevel
-
-LF='
-'
-ok_to_skip_pre_rebase=
-
-squash_onto=
-unset onto
-unset restrict_revision
-cmd=
-strategy=
-strategy_opts=
-do_merge=
-merge_dir="$GIT_DIR"/rebase-merge
-apply_dir="$GIT_DIR"/rebase-apply
-verbose=
-diffstat=
-test "$(git config --bool rebase.stat)" = true && diffstat=t
-autostash="$(git config --bool rebase.autostash || echo false)"
-fork_point=auto
-git_am_opt=
-git_format_patch_opt=
-rebase_root=
-force_rebase=
-allow_rerere_autoupdate=
-# Non-empty if a rebase was in progress when 'git rebase' was invoked
-in_progress=
-# One of {am, merge, interactive}
-type=
-# One of {"$GIT_DIR"/rebase-apply, "$GIT_DIR"/rebase-merge}
-state_dir=
-# One of {'', continue, skip, abort}, as parsed from command line
-action=
-rebase_merges=
-rebase_cousins=
-preserve_merges=
-autosquash=
-keep_empty=
-allow_empty_message=--allow-empty-message
-signoff=
-reschedule_failed_exec=
-test "$(git config --bool rebase.autosquash)" = "true" && autosquash=t
-case "$(git config --bool commit.gpgsign)" in
-true) gpg_sign_opt=-S ;;
-*) gpg_sign_opt= ;;
-esac
-test "$(git config --bool rebase.reschedulefailedexec)" = "true" &&
-reschedule_failed_exec=--reschedule-failed-exec
-. git-rebase--common
-
-read_basic_state () {
- test -f "$state_dir/head-name" &&
- test -f "$state_dir/onto" &&
- head_name=$(cat "$state_dir"/head-name) &&
- onto=$(cat "$state_dir"/onto) &&
- # We always write to orig-head, but interactive rebase used to write to
- # head. Fall back to reading from head to cover for the case that the
- # user upgraded git with an ongoing interactive rebase.
- if test -f "$state_dir"/orig-head
- then
- orig_head=$(cat "$state_dir"/orig-head)
- else
- orig_head=$(cat "$state_dir"/head)
- fi &&
- test -f "$state_dir"/quiet && GIT_QUIET=t
- test -f "$state_dir"/verbose && verbose=t
- test -f "$state_dir"/strategy && strategy="$(cat "$state_dir"/strategy)"
- test -f "$state_dir"/strategy_opts &&
- strategy_opts="$(cat "$state_dir"/strategy_opts)"
- test -f "$state_dir"/allow_rerere_autoupdate &&
- allow_rerere_autoupdate="$(cat
"$state_dir"/allow_rerere_autoupdate)"
- test -f "$state_dir"/gpg_sign_opt &&
- gpg_sign_opt="$(cat "$state_dir"/gpg_sign_opt)"
- test -f "$state_dir"/signoff && {
- signoff="$(cat "$state_dir"/signoff)"
- force_rebase=t
- }
- test -f "$state_dir"/reschedule-failed-exec &&
- reschedule_failed_exec=t
-}
-
-finish_rebase () {
- rm -f "$(git rev-parse --git-path REBASE_HEAD)"
- apply_autostash &&
- { git gc --auto || true; } &&
- rm -rf "$state_dir"
-}
-
-run_interactive () {
- GIT_CHERRY_PICK_HELP="$resolvemsg"
- export GIT_CHERRY_PICK_HELP
-
- test -n "$keep_empty" && keep_empty="--keep-empty"
- test -n "$rebase_merges" && rebase_merges="--rebase-merges"
- test -n "$rebase_cousins" && rebase_cousins="--rebase-cousins"
- test -n "$autosquash" && autosquash="--autosquash"
- test -n "$verbose" && verbose="--verbose"
- test -n "$force_rebase" && force_rebase="--no-ff"
- test -n "$restrict_revision" && \
- restrict_revision="--restrict-revision=^$restrict_revision"
- test -n "$upstream" && upstream="--upstream=$upstream"
- test -n "$onto" && onto="--onto=$onto"
- test -n "$squash_onto" && squash_onto="--squash-onto=$squash_onto"
- test -n "$onto_name" && onto_name="--onto-name=$onto_name"
- test -n "$head_name" && head_name="--head-name=$head_name"
- test -n "$strategy" && strategy="--strategy=$strategy"
- test -n "$strategy_opts" &&
strategy_opts="--strategy-opts=$strategy_opts"
- test -n "$switch_to" && switch_to="--switch-to=$switch_to"
- test -n "$cmd" && cmd="--cmd=$cmd"
- test -n "$action" && action="--$action"
-
- exec git rebase--interactive "$action" "$keep_empty" "$rebase_merges"
"$rebase_cousins" \
- "$upstream" "$onto" "$squash_onto" "$restrict_revision" \
- "$allow_empty_message" "$autosquash" "$verbose" \
- "$force_rebase" "$onto_name" "$head_name" "$strategy" \
- "$strategy_opts" "$cmd" "$switch_to" \
- "$allow_rerere_autoupdate" "$gpg_sign_opt" "$signoff" \
- "$reschedule_failed_exec"
-}
-
-run_specific_rebase () {
- if [ "$interactive_rebase" = implied ]; then
- GIT_SEQUENCE_EDITOR=:
- export GIT_SEQUENCE_EDITOR
- autosquash=
- fi
-
- if test -n "$interactive_rebase" -a -z "$preserve_merges"
- then
- run_interactive
- else
- . git-rebase--$type
-
- if test -z "$preserve_merges"
- then
- git_rebase__$type
- else
- git_rebase__preserve_merges
- fi
- fi
-
- ret=$?
- if test $ret -eq 0
- then
- finish_rebase
- elif test $ret -eq 2 # special exit status for rebase -p
- then
- apply_autostash &&
- rm -rf "$state_dir" &&
- die "Nothing to do"
- fi
- exit $ret
-}
-
-run_pre_rebase_hook () {
- if test -z "$ok_to_skip_pre_rebase" &&
- test -x "$(git rev-parse --git-path hooks/pre-rebase)"
- then
- "$(git rev-parse --git-path hooks/pre-rebase)" ${1+"$@"} ||
- die "$(gettext "The pre-rebase hook refused to rebase.")"
- fi
-}
-
-test -f "$apply_dir"/applying &&
- die "$(gettext "It looks like 'git am' is in progress. Cannot rebase.")"
-
-if test -d "$apply_dir"
-then
- type=am
- state_dir="$apply_dir"
-elif test -d "$merge_dir"
-then
- type=interactive
- if test -d "$merge_dir"/rewritten
- then
- type=preserve-merges
- interactive_rebase=explicit
- preserve_merges=t
- elif test -f "$merge_dir"/interactive
- then
- interactive_rebase=explicit
- fi
- state_dir="$merge_dir"
-fi
-test -n "$type" && in_progress=t
-
-total_argc=$#
-while test $# != 0
-do
- case "$1" in
- --no-verify)
- ok_to_skip_pre_rebase=yes
- ;;
- --verify)
- ok_to_skip_pre_rebase=
- ;;
- --continue|--skip|--abort|--quit|--edit-todo|--show-current-patch)
- test $total_argc -eq 2 || usage
- action=${1##--}
- ;;
- --onto=*)
- onto="${1#--onto=}"
- ;;
- --exec=*)
- cmd="${cmd}exec ${1#--exec=}${LF}"
- test -z "$interactive_rebase" && interactive_rebase=implied
- ;;
- --interactive)
- interactive_rebase=explicit
- ;;
- --keep-empty)
- keep_empty=yes
- ;;
- --allow-empty-message)
- allow_empty_message=--allow-empty-message
- ;;
- --no-keep-empty)
- keep_empty=
- ;;
- --rebase-merges)
- rebase_merges=t
- test -z "$interactive_rebase" && interactive_rebase=implied
- ;;
- --rebase-merges=*)
- rebase_merges=t
- case "${1#*=}" in
- rebase-cousins) rebase_cousins=t;;
- no-rebase-cousins) rebase_cousins=;;
- *) die "Unknown mode: $1";;
- esac
- test -z "$interactive_rebase" && interactive_rebase=implied
- ;;
- --preserve-merges)
- preserve_merges=t
- test -z "$interactive_rebase" && interactive_rebase=implied
- ;;
- --autosquash)
- autosquash=t
- ;;
- --no-autosquash)
- autosquash=
- ;;
- --fork-point)
- fork_point=t
- ;;
- --no-fork-point)
- fork_point=
- ;;
- --merge)
- do_merge=t
- ;;
- --strategy-option=*)
- strategy_opts="$strategy_opts $(git rev-parse --sq-quote
"--${1#--strategy-option=}" | sed -e s/^.//)"
- do_merge=t
- test -z "$strategy" && strategy=recursive
- ;;
- --strategy=*)
- strategy="${1#--strategy=}"
- do_merge=t
- ;;
- --no-stat)
- diffstat=
- ;;
- --stat)
- diffstat=t
- ;;
- --autostash)
- autostash=true
- ;;
- --no-autostash)
- autostash=false
- ;;
- --verbose)
- verbose=t
- diffstat=t
- GIT_QUIET=
- ;;
- --quiet)
- GIT_QUIET=t
- git_am_opt="$git_am_opt -q"
- verbose=
- diffstat=
- ;;
- --whitespace=*)
- git_am_opt="$git_am_opt --whitespace=${1#--whitespace=}"
- case "${1#--whitespace=}" in
- fix|strip)
- force_rebase=t
- ;;
- warn|nowarn|error|error-all)
- ;; # okay, known whitespace option
- *)
- die "fatal: Invalid whitespace option: '${1#*=}'"
- ;;
- esac
- ;;
- --ignore-whitespace)
- git_am_opt="$git_am_opt $1"
- ;;
- --signoff)
- signoff=--signoff
- ;;
- --no-signoff)
- signoff=
- ;;
- --committer-date-is-author-date|--ignore-date)
- git_am_opt="$git_am_opt $1"
- force_rebase=t
- ;;
- -C*[!0-9]*)
- die "fatal: switch \`C' expects a numerical value"
- ;;
- -C*)
- git_am_opt="$git_am_opt $1"
- ;;
- --root)
- rebase_root=t
- ;;
- --force-rebase|--no-ff)
- force_rebase=t
- ;;
- --rerere-autoupdate|--no-rerere-autoupdate)
- allow_rerere_autoupdate="$1"
- ;;
- --gpg-sign)
- gpg_sign_opt=-S
- ;;
- --gpg-sign=*)
- gpg_sign_opt="-S${1#--gpg-sign=}"
- ;;
- --reschedule-failed-exec)
- reschedule_failed_exec=--reschedule-failed-exec
- ;;
- --no-reschedule-failed-exec)
- reschedule_failed_exec=
- ;;
- --)
- shift
- break
- ;;
- *)
- usage
- ;;
- esac
- shift
-done
-test $# -gt 2 && usage
-
-if test -n "$action"
-then
- test -z "$in_progress" && die "$(gettext "No rebase in progress?")"
- # Only interactive rebase uses detailed reflog messages
- if test -n "$interactive_rebase" && test "$GIT_REFLOG_ACTION" = rebase
- then
- GIT_REFLOG_ACTION="rebase -i ($action)"
- export GIT_REFLOG_ACTION
- fi
-fi
-
-if test "$action" = "edit-todo" && test -z "$interactive_rebase"
-then
- die "$(gettext "The --edit-todo action can only be used during
interactive rebase.")"
-fi
-
-case "$action" in
-continue)
- # Sanity check
- git rev-parse --verify HEAD >/dev/null ||
- die "$(gettext "Cannot read HEAD")"
- git update-index --ignore-submodules --refresh &&
- git diff-files --quiet --ignore-submodules || {
- echo "$(gettext "You must edit all merge conflicts and then
-mark them as resolved using git add")"
- exit 1
- }
- read_basic_state
- run_specific_rebase
- ;;
-skip)
- output git reset --hard HEAD || exit $?
- read_basic_state
- run_specific_rebase
- ;;
-abort)
- git rerere clear
- read_basic_state
- case "$head_name" in
- refs/*)
- git symbolic-ref -m "rebase: aborting" HEAD $head_name ||
- die "$(eval_gettext "Could not move back to \$head_name")"
- ;;
- esac
- output git reset --hard $orig_head
- finish_rebase
- exit
- ;;
-quit)
- exec rm -rf "$state_dir"
- ;;
-edit-todo)
- run_specific_rebase
- ;;
-show-current-patch)
- run_specific_rebase
- die "BUG: run_specific_rebase is not supposed to return here"
- ;;
-esac
-
-# Make sure no rebase is in progress
-if test -n "$in_progress"
-then
- state_dir_base=${state_dir##*/}
- cmd_live_rebase="git rebase (--continue | --abort | --skip)"
- cmd_clear_stale_rebase="rm -fr \"$state_dir\""
- die "
-$(eval_gettext 'It seems that there is already a $state_dir_base directory, and
-I wonder if you are in the middle of another rebase. If that is the
-case, please try
- $cmd_live_rebase
-If that is not the case, please
- $cmd_clear_stale_rebase
-and run me again. I am stopping in case you still have something
-valuable there.')"
-fi
-
-if test -n "$rebase_root" && test -z "$onto"
-then
- test -z "$interactive_rebase" && interactive_rebase=implied
-fi
-
-if test -n "$keep_empty"
-then
- test -z "$interactive_rebase" && interactive_rebase=implied
-fi
-
-actually_interactive=
-if test -n "$interactive_rebase"
-then
- if test -z "$preserve_merges"
- then
- type=interactive
- else
- type=preserve-merges
- fi
- actually_interactive=t
- state_dir="$merge_dir"
-elif test -n "$do_merge"
-then
- interactive_rebase=implied
- type=interactive
- state_dir="$merge_dir"
-else
- type=am
- state_dir="$apply_dir"
-fi
-
-if test -t 2 && test -z "$GIT_QUIET"
-then
- git_format_patch_opt="$git_format_patch_opt --progress"
-fi
-
-incompatible_opts=$(echo " $git_am_opt " | \
- sed -e 's/ -q / /g' -e 's/^ \(.*\) $/\1/')
-if test -n "$incompatible_opts"
-then
- if test -n "$actually_interactive" || test "$do_merge"
- then
- die "$(gettext "fatal: cannot combine am options with either
interactive or merge options")"
- fi
-fi
-
-if test -n "$signoff"
-then
- test -n "$preserve_merges" &&
- die "$(gettext "fatal: cannot combine '--signoff' with
'--preserve-merges'")"
- git_am_opt="$git_am_opt $signoff"
- force_rebase=t
-fi
-
-if test -n "$preserve_merges"
-then
- # Note: incompatibility with --signoff handled in signoff block above
- # Note: incompatibility with --interactive is just a strong warning;
- # git-rebase.txt caveats with "unless you know what you are doing"
- test -n "$rebase_merges" &&
- die "$(gettext "fatal: cannot combine '--preserve-merges' with
'--rebase-merges'")"
-
- test -n "$reschedule_failed_exec" &&
- die "$(gettext "error: cannot combine '--preserve-merges' with
'--reschedule-failed-exec'")"
-fi
-
-if test -n "$rebase_merges"
-then
- test -n "$strategy_opts" &&
- die "$(gettext "fatal: cannot combine '--rebase-merges' with
'--strategy-option'")"
- test -n "$strategy" &&
- die "$(gettext "fatal: cannot combine '--rebase-merges' with
'--strategy'")"
-fi
-
-if test -z "$rebase_root"
-then
- case "$#" in
- 0)
- if ! upstream_name=$(git rev-parse --symbolic-full-name \
- --verify -q @{upstream} 2>/dev/null)
- then
- . git-parse-remote
- error_on_missing_default_upstream "rebase" "rebase" \
- "against" "git rebase $(gettext '<branch>')"
- fi
-
- test "$fork_point" = auto && fork_point=t
- ;;
- *) upstream_name="$1"
- if test "$upstream_name" = "-"
- then
- upstream_name="@{-1}"
- fi
- shift
- ;;
- esac
- upstream=$(peel_committish "${upstream_name}") ||
- die "$(eval_gettext "invalid upstream '\$upstream_name'")"
- upstream_arg="$upstream_name"
-else
- if test -z "$onto"
- then
- empty_tree=$(git hash-object -t tree /dev/null)
- onto=$(git commit-tree $empty_tree </dev/null)
- squash_onto="$onto"
- fi
- unset upstream_name
- unset upstream
- test $# -gt 1 && usage
- upstream_arg=--root
-fi
-
-# Make sure the branch to rebase onto is valid.
-onto_name=${onto-"$upstream_name"}
-case "$onto_name" in
-*...*)
- if left=${onto_name%...*} right=${onto_name#*...} &&
- onto=$(git merge-base --all ${left:-HEAD} ${right:-HEAD})
- then
- case "$onto" in
- ?*"$LF"?*)
- die "$(eval_gettext "\$onto_name: there are more than
one merge bases")"
- ;;
- '')
- die "$(eval_gettext "\$onto_name: there is no merge
base")"
- ;;
- esac
- else
- die "$(eval_gettext "\$onto_name: there is no merge base")"
- fi
- ;;
-*)
- onto=$(peel_committish "$onto_name") ||
- die "$(eval_gettext "Does not point to a valid commit: \$onto_name")"
- ;;
-esac
-
-# If the branch to rebase is given, that is the branch we will rebase
-# $branch_name -- branch/commit being rebased, or HEAD (already detached)
-# $orig_head -- commit object name of tip of the branch before rebasing
-# $head_name -- refs/heads/<that-branch> or "detached HEAD"
-switch_to=
-case "$#" in
-1)
- # Is it "rebase other $branchname" or "rebase other $commit"?
- branch_name="$1"
- switch_to="$1"
-
- # Is it a local branch?
- if git show-ref --verify --quiet -- "refs/heads/$branch_name" &&
- orig_head=$(git rev-parse -q --verify "refs/heads/$branch_name")
- then
- head_name="refs/heads/$branch_name"
- # If not is it a valid ref (branch or commit)?
- elif orig_head=$(git rev-parse -q --verify "$branch_name")
- then
- head_name="detached HEAD"
-
- else
- die "$(eval_gettext "fatal: no such branch/commit
'\$branch_name'")"
- fi
- ;;
-0)
- # Do not need to switch branches, we are already on it.
- if branch_name=$(git symbolic-ref -q HEAD)
- then
- head_name=$branch_name
- branch_name=$(expr "z$branch_name" : 'zrefs/heads/\(.*\)')
- else
- head_name="detached HEAD"
- branch_name=HEAD
- fi
- orig_head=$(git rev-parse --verify HEAD) || exit
- ;;
-*)
- die "BUG: unexpected number of arguments left to parse"
- ;;
-esac
-
-if test "$fork_point" = t
-then
- new_upstream=$(git merge-base --fork-point "$upstream_name" \
- "${switch_to:-HEAD}")
- if test -n "$new_upstream"
- then
- restrict_revision=$new_upstream
- fi
-fi
-
-if test "$autostash" = true && ! (require_clean_work_tree) 2>/dev/null
-then
- stash_sha1=$(git stash create "autostash") ||
- die "$(gettext 'Cannot autostash')"
-
- mkdir -p "$state_dir" &&
- echo $stash_sha1 >"$state_dir/autostash" &&
- stash_abbrev=$(git rev-parse --short $stash_sha1) &&
- echo "$(eval_gettext 'Created autostash: $stash_abbrev')" &&
- git reset --hard
-fi
-
-require_clean_work_tree "rebase" "$(gettext "Please commit or stash them.")"
-
-# Now we are rebasing commits $upstream..$orig_head (or with --root,
-# everything leading up to $orig_head) on top of $onto
-
-# Check if we are already based on $onto with linear history,
-# but this should be done only when upstream and onto are the same
-# and if this is not an interactive rebase.
-mb=$(git merge-base "$onto" "$orig_head")
-if test -z "$actually_interactive" && test "$upstream" = "$onto" &&
- test "$mb" = "$onto" && test -z "$restrict_revision" &&
- # linear history?
- ! (git rev-list --parents "$onto".."$orig_head" | sane_grep " .* ") >
/dev/null
-then
- if test -z "$force_rebase"
- then
- # Lazily switch to the target branch if needed...
- test -z "$switch_to" ||
- GIT_REFLOG_ACTION="$GIT_REFLOG_ACTION: checkout $switch_to" \
- git checkout -q "$switch_to" --
- if test "$branch_name" = "HEAD" &&
- ! git symbolic-ref -q HEAD
- then
- say "$(eval_gettext "HEAD is up to date.")"
- else
- say "$(eval_gettext "Current branch \$branch_name is up
to date.")"
- fi
- finish_rebase
- exit 0
- else
- if test "$branch_name" = "HEAD" &&
- ! git symbolic-ref -q HEAD
- then
- say "$(eval_gettext "HEAD is up to date, rebase
forced.")"
- else
- say "$(eval_gettext "Current branch \$branch_name is up
to date, rebase forced.")"
- fi
- fi
-fi
-
-# If a hook exists, give it a chance to interrupt
-run_pre_rebase_hook "$upstream_arg" "$@"
-
-if test -n "$diffstat"
-then
- if test -n "$verbose"
- then
- if test -z "$mb"
- then
- echo "$(eval_gettext "Changes to \$onto:")"
- else
- echo "$(eval_gettext "Changes from \$mb to \$onto:")"
- fi
- fi
- mb_tree="${mb:-$(git hash-object -t tree /dev/null)}"
- # We want color (if set), but no pager
- GIT_PAGER='' git diff --stat --summary "$mb_tree" "$onto"
-fi
-
-if test -z "$actually_interactive" && test "$mb" = "$orig_head"
-then
- say "$(eval_gettext "Fast-forwarded \$branch_name to \$onto_name.")"
- GIT_REFLOG_ACTION="$GIT_REFLOG_ACTION: checkout $onto_name" \
- git checkout -q "$onto^0" || die "could not detach HEAD"
- # If the $onto is a proper descendant of the tip of the branch, then
- # we just fast-forwarded.
- git update-ref ORIG_HEAD $orig_head
- move_to_original_branch
- finish_rebase
- exit 0
-fi
-
-test -n "$interactive_rebase" && run_specific_rebase
-
-# Detach HEAD and reset the tree
-say "$(gettext "First, rewinding head to replay your work on top of it...")"
-
-GIT_REFLOG_ACTION="$GIT_REFLOG_ACTION: checkout $onto_name" \
- git checkout -q "$onto^0" || die "could not detach HEAD"
-git update-ref ORIG_HEAD $orig_head
-
-if test -n "$rebase_root"
-then
- revisions="$onto..$orig_head"
-else
- revisions="${restrict_revision-$upstream}..$orig_head"
-fi
-
-run_specific_rebase
diff --git a/t/README b/t/README
index 1326fd7505..decceb8576 100644
--- a/t/README
+++ b/t/README
@@ -374,10 +374,6 @@ the --no-sparse command-line argument.
GIT_TEST_PRELOAD_INDEX=<boolean> exercises the preload-index code path
by overriding the minimum number of cache entries required per thread.
-GIT_TEST_REBASE_USE_BUILTIN=<boolean>, when false, disables the
-builtin version of git-rebase. See 'rebase.useBuiltin' in
-git-config(1).
-
GIT_TEST_INDEX_THREADS=<n> enables exercising the multi-threaded loading
of the index for the whole test suite by bypassing the default number of
cache entries and thread minimums. Setting this to 1 will make the
diff --git a/t/t3400-rebase.sh b/t/t3400-rebase.sh
index 3e73f7584c..0a88eed1db 100755
--- a/t/t3400-rebase.sh
+++ b/t/t3400-rebase.sh
@@ -311,4 +311,10 @@ test_expect_success 'rebase--merge.sh and
--show-current-patch' '
)
'
+test_expect_success 'rebase -c rebase.useBuiltin=false warning' '
+ test_must_fail env GIT_TEST_REBASE_USE_BUILTIN= \
+ git -c rebase.useBuiltin=false rebase 2>err &&
+ test_i18ngrep "rebase.useBuiltin support has been removed" err
+'
+
test_done
--
2.20.1.611.gfbb209baf1
