Added commit-tree, diff-cache and environment info
Signed-off-by: David Greaves <[EMAIL PROTECTED]>
---
Index: README.reference
===================================================================
--- c0260bfb82da04aeff4e598ced5295d6ae2e262d/README.reference (mode:100644
sha1:8186a561108d3c62625614272bd5e2f7d5826b4b)
+++ 5f204110aef2538fdc512e09e4a075b3afac8eff/README.reference (mode:100644
sha1:b5fc4fb969ec3f52877408c8df4ba131a8c4a7b2)
@@ -109,12 +109,173 @@
################################################################
commit-tree
- commit-tree <sha1> [-p <sha1>]* < changelog
+ commit-tree <sha1> [-p <parent sha1>...] < changelog
+Creates a new commit object based on the provided tree object and
+emits the new commit object id on stdout. If no parent is given then
+it is considered to be an initial tree.
+
+A commit object usually has 1 parent (a commit after a change) or 2
+parents (a merge) although there is no reason it cannot have more than
+2 parents.
+
+While a tree represents a particular directory state of a working
+directory, a commit represents that state in "time", and explains how
+to get there.
+
+Normally a commit would identify a new "HEAD" state, and while git
+doesn't care where you save the note about that state, in practice we
+tend to just write the result to the file ".git/HEAD", so that we can
+always see what the last committed state was.
+
+Options
+
+<sha1>
+ An existing tree object
+
+-p <parent sha1>
+ Each -p indicates a the id of a parent commit object.
+
+
+Commit Information
+
+A commit encapsulates:
+ all parent object ids
+ author name, email and date
+ committer name and email and the commit time.
+
+If not provided, commit-tree uses your name, hostname and domain to
+provide author and committer info. This can be overridden using the
+following environment variables.
+ AUTHOR_NAME
+ AUTHOR_EMAIL
+ AUTHOR_DATE
+ COMMIT_AUTHOR_NAME
+ COMMIT_AUTHOR_EMAIL
+(nb <,> and CRs are stripped)
+
+A commit comment is read from stdin (max 999 chars)
+
+see also: write-tree
+
+
+################################################################
+diff-cache
+ diff-cache [-r] [-z] <tree/commit sha1>
+
+Compares the content and mode of the blobs found via a tree object
+with the content of the current cache and, optionally, the stat state
+of the file on disk.
+
+(This is basically a special case of diff-tree that works with the
+current cache as the first tree.)
+
+<tree sha1>
+ The id of a tree or commit object to diff against.
+
+-r
+ recurse
+
+-z
+ /0 line termintation on output
+
+--cached
+ do not consider the on-disk file at all
+
+Output format:
+
+For files in the tree but not in the cache
+-<mode> <type> <sha1> <filename>
+
+For files in the cache but not in the tree
++<mode> <type> <sha1> <filename>
+
+For files that differ:
+*<tree-mode>-><cache-mode> <type> <tree sha1>-><cache sha1>
path/<filename>
+
+In the special case of the file being changed on disk and out of sync with the
cache, the sha1
+
+Operating Modes
+You can choose whether you want to trust the index file entirely
+(using the "--cached" flag) or ask the diff logic to show any files
+that don't match the stat state as being "tentatively changed". Both
+of these operations are very useful indeed.
+
+Cached Mode
+If --cached is specified, it allows you to ask:
+ show me the differences between HEAD and the current index
+ contents (the ones I'd write with a "write-tree")
+
+For example, let's say that you have worked on your index file, and are
+ready to commit. You want to see eactly _what_ you are going to commit is
+without having to write a new tree object and compare it that way, and to
+do that, you just do
+
+ diff-cache --cached $(cat .git/HEAD)
+
+Example: let's say I had renamed "commit.c" to "git-commit.c", and I had
+done an "upate-cache" to make that effective in the index file.
+"show-diff" wouldn't show anything at all, since the index file matches
+my working directory. But doing a diff-cache does:
+ [EMAIL PROTECTED]:~/git> diff-cache --cached $(cat .git/HEAD)
+ -100644 blob 4161aecc6700a2eb579e842af0b7f22b98443f74 commit.c
+ +100644 blob 4161aecc6700a2eb579e842af0b7f22b98443f74
git-commit.c
+
+And as you can see, the output matches "diff-tree -r" output (we
+always do "-r", since the index is always fully populated
+??CHECK??).
+You can trivially see that the above is a rename.
+
+In fact, "diff-tree --cached" _should_ always be entirely equivalent to
+actually doing a "write-tree" and comparing that. Except this one is much
+nicer for the case where you just want to check where you are.
+
+So doing a "diff-cache --cached" is basically very useful when you are
+asking yourself "what have I already marked for being committed, and
+what's the difference to a previous tree".
+
+Non-cached Mode
+
+The "non-cached" mode takes a different approach, and is potentially
+the even more useful of the two in that what it does can't be emulated
+with a "write-tree + diff-tree". Thus that's the default mode. The
+non-cached version asks the question
+
+ "show me the differences between HEAD and the currently checked out
+ tree - index contents _and_ files that aren't up-to-date"
+
+which is obviously a very useful question too, since that tells you what
+you _could_ commit. Again, the output matches the "diff-tree -r" output to
+a tee, but with a twist.
+
+The twist is that if some file doesn't match the cache, we don't have a
+backing store thing for it, and we use the magic "all-zero" sha1 to show
+that. So let's say that you have edited "kernel/sched.c", but have not
+actually done an update-cache on it yet - there is no "object" associated
+with the new state, and you get:
+
+ [EMAIL PROTECTED]:~/v2.6/linux> diff-cache $(cat .git/HEAD )
+ *100644->100664 blob
7476bbcfe5ef5a1dd87d745f298b831143e4d77e->0000000000000000000000000000000000000000
kernel/sched.c
+
+ie it shows that the tree has changed, and that "kernel/sched.c" has is
+not up-to-date and may contain new stuff. The all-zero sha1 means that to
+get the real diff, you need to look at the object in the working directory
+directly rather than do an object-to-object diff.
+
+NOTE! As with other commands of this type, "diff-cache" does not actually
+look at the contents of the file at all. So maybe "kernel/sched.c" hasn't
+actually changed, and it's just that you touched it. In either case, it's
+a note that you need to upate-cache it to make the cache be in sync.
+
+NOTE 2! You can have a mixture of files show up as "has been updated" and
+"is still dirty in the working directory" together. You can always tell
+which file is in which state, since the "has been updated" ones show a
+valid sha1, and the "not in sync with the index" ones will always have the
+special all-zero sha1.
################################################################
diff-tree
- diff-tree [-r] [-z] <tree sha1> <tree sha1>
+ diff-tree [-r] [-z] <tree sha1> <tree sha1>
################################################################
@@ -156,3 +317,23 @@
unpack-file
unpack-file.c <sha1>
+
+
+git Environment Variables
+GIT_CACHE_DIRECTORY
+AUTHOR_NAME
+AUTHOR_EMAIL
+AUTHOR_DATE
+RSYNC_FLAGS
+GIT_INDEX_FILE
+
+
+.git Repository Files
+
+.git/HEAD
+This file always contains the last (head) commit object created for this
branch of the repository.
+(Usually symlinked to a file in .git/heads/)
+
+.git/heads/
+This directory contains a file for each branch of the .git repository.
+The name of the file is the friendly name of the branch (eg pasky)
