Hi all! A company has a small satellite-controlling-system. The main-controller is a small "half-intelligent" device. This device can only accessed over a network (10Mps is enough). The DIMM-PC (http://www.jumptec.de/ - yes a german site, but there is a link to the english pages) is the device, which have access to the main-controller. On the DIMM-PC is a software running to control the main-controller. Nothing of the DIMM-PC -concept is realized for now. The company want to have a graphical controller-software, which I should write. I plan to install Linux and GGI on it. This allows me writing graphical software with network-access easier than a pre-installed DR-DOS, right? Before I start to realize this, I must by a test-suite (http://www.jumptec.de/), which allows to realize my plan _and_ should be as cheap as possible... I hope you can follow me so far - if not ask me! My questions are: 1. Is it possible to realize my plan at all? 2. Which components should/must I choose to buy? Christoph Egger E-Mail: [EMAIL PROTECTED]
