Hi, I have strange problem with sata-disks names/numbering:
Until now, I had 2 sata-disk and one sata-dvdrw, attached to positions marked as "sata1", "sata2" and "sata3" in motherboard-manual, and detected as follows: Mobo: drive: system: sata1 160GB /dev/sda sata2 160GB /dev/sdb sata3 dvdrw /dev/sdc sata4 (none) Now I installed one more sata-disk, attached to "sata4" position on mobo. But this changed the way how other disks are detected: Mobo: drive: system: sata1 160GB /dev/sdb sata2 160GB /dev/sdc sata3 dvdrw (not_detected) sata4 500GB /dev/sda I tried to switch cables, attached that new 500gb disk into sata1/sata2/sata3/sata4 connectors, but it is still the same! This last disk is always detected by system as /dev/sda, no matter in which connector I attach its cable. And my system does not want to boot because devices in /etc/fstab does not correspond now with disk names (what was /dev/sda1 before, is now /dev/sdb1, etc.). Strange thing, in bios-screen devices are detected correctly, the last disk as "Fourth SATA drive"... How can I fix this mess? How can I force this last disk to be /dev/sdd? Jarry -- _______________________________________________________________ This mailbox accepts e-mails only from selected mailing-lists! Everything else is considered to be spam and therefore deleted.
