Roger Mason wrote:
Hello John & Walt,
Thanks for the responses. Here is the information you asked for.
John Lowry <johnlo...@gmail.com> writes:
What is the contents of your /etc/udev/rules.d/70-persistent-net.rules
# PCI device 0x10b7:0x9200 (3c59x)
SUBSYSTEM=="net", DRIVERS=="?*", ATTR{address}=="00:01:03:c5:2a:7b",
NAME="eth0"
# PCI device 0x1113:0x1211 (8139too)
SUBSYSTEM=="net", DRIVERS=="?*", ATTR{address}=="00:10:b5:e0:c5:13",
NAME="eth1"
# PCI device 0x1113:0x1211 (8139too)
SUBSYSTEM=="net", DRIVERS=="?*", ATTR{address}=="00:10:b5:e0:cc:c8",
NAME="eth2"
# PCI device 0x10b7:0x9200 (3c59x)
SUBSYSTEM=="net", DRIVERS=="?*", ATTR{address}=="00:04:75:8f:8f:b4",
NAME="eth3"
file contain? Also, what about ifconfig -a?
eth0 Link encap:Ethernet HWaddr 00:01:03:C5:2A:7B
inet addr:134.153.37.83 Bcast:134.153.37.255
Mask:255.255.254.0
inet6 addr: fe80::201:3ff:fec5:2a7b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:407960 errors:0 dropped:0 overruns:1 frame:0
TX packets:105016 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:70312188 (67.0 Mb) TX bytes:22034895 (21.0 Mb)
Interrupt:11 Base address:0x2000
eth2 Link encap:Ethernet HWaddr 00:10:B5:E0:CC:C8
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:10 Base address:0x4000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:79 errors:0 dropped:0 overruns:0 frame:0
TX packets:79 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:5980 (5.8 Kb) TX bytes:5980 (5.8 Kb)
sit0 Link encap:IPv6-in-IPv4
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Based on the above it looks like you have had or still have four NICs
installed? If you have only the two cards installed you can delete
everything except for the first entry and the one referencing the card
currently in the machine and change name to "eth1." So:
SUBSYSTEM=="net", DRIVERS=="?*", ATTR{address}=="00:01:03:c5:2a:7b",
NAME="eth0"
SUBSYSTEM=="net", DRIVERS=="?*", ATTR{address}=="00:10:b5:e0:cc:c8",
NAME="eth1"
