Hong Hao schrieb am 06.09.2008 15:29:
Dan Johansson wrote:
I have bought me a new toy - an Openmoko Freerunner.
Each time I connect it to my Gentoo-box I must configure the usb0
device on the Gentoo-box as follows:
ifconfig usb0 192.168.0.200 netmask 255.255.255.248 After that I can
without problem ssh to the Freerunner. Now I want the above to be
automatically done when I connect the Freerunner. I have found the the
following description for Ubunto:
Add the following lines to your /etc/network/interfaces :
allow-hotplug usb0
auto usb0
iface usb0 inet static
address 192.168.0.200
netmask 255.255.255.0
network 192.168.0.0
up iptables -A POSTROUTING -t nat -j MASQUERADE -s 192.168.0.0/24 &
up echo 1 > /proc/sys/net/ipv4/ip_forward &
up iptables -P FORWARD ACCEPT &
down iptables -D POSTROUTING -t nat -j MASQUERADE -s 192.168.0.0/24
What would be the corresponding file(s) on Gentoo?
Regards,
/etc/conf.d/network
I would try this: /etc/conf.d/net :-)
