Re: [gentoo-user] X doesn't work with Intel 915GM

[Florian Philipp]

Zhou Rui schrieb:

Hi,
I'm using a Intel 915 on board VGA card. After I install the Xorg, and run:
# Xorg -configure
# X -config xorg.conf.new

The X startup failed but there is now error reported... I cannot find
what's wrong
with my config, so what should I do in this situation.

For a start, I attach my Xorg.conf which works with the same chip.


# user have RW right to /dev/dri/card0 

Section "ServerLayout"
        Identifier     "Layout0"
        Screen         0 "Screen0" 0 0
        InputDevice    "Keyboard0" "CoreKeyboard"
        InputDevice    "Touchpad" "CorePointer"
EndSection

Section "Files"
EndSection

Section "Module"
        Load  "freetype"
        # Load "xtt"
        Load  "extmod"
        Load  "glx"
        Load  "dri"
        Load  "dbe"
        Load  "record"
        Load  "xtrap"
        Load  "type1"
EndSection

Section "InputDevice"
        Identifier  "Touchpad"
        Driver      "synaptics"
        Option "SendCoreEvents" "true"
        Option "Protocol" "auto-dev"
        Option "LeftEdge" "130"
        Option "RightEdge" "840"
        Option "TopEdge" "130"
        Option "BottomEdge" "640"
        Option "FingerLow" "7"
        Option "FingerHigh" "8"
        Option "MaxTapTime" "180"
        Option "MaxTapMove" "110"
        Option "EmulateMidButtonTime" "75"
        Option "VertScrollDelta" "20"
        Option "HorizScrollDelta" "20"
        Option "MinSpeed" "0.60"
        Option "MaxSpeed" "1.10"
        Option "AccelFactor" "0.030"
        Option "EdgeMotionMinSpeed" "200"
        Option "EdgeMotionMaxSpeed" "200"
        Option "UpDownScrolling" "1"
        Option "CircularScrolling" "1"
        Option "CircScrollDelta" "0.1"
        Option "CircScrollTrigger" "2"
        Option "SHMConfig" "on"
        Option "Emulate3Buttons" "on"
#       Option      "Protocol" "Auto"
#       Option      "Emulate3Buttons"
        Option      "Device" "/dev/input/mouse1"
EndSection

#Section "InputDevice"
        #Identifier  "Mouse0T"
        #Driver      "mouse"
        #Option     "Protocol" "Auto"
        #Option     "Emulate3Buttons"
        #Option     "Device" "/dev/input/mice"
#EndSection

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "kbd"
        Option      "XkbModel" "inspiron"
        Option      "XkbLayout" "de"
EndSection

Section "Monitor"
 ### Comment all HorizSync and VertRefresh values to use DDC:
        Identifier   "LCD"
 ### Comment all HorizSync and VertRefresh values to use DDC:
#       HorizSync    31.5 - 79.0
#       VertRefresh  50.0 - 70.0
#       Option       "DPMS"
#       Option       "PreferredMode" "1400x1050"
EndSection

Section "Device"
        Identifier  "Card0"
        Driver      "i810"
        Card        "** Intel i810 (generic)               [i810]"
        Option      "LVDS" "LCD"
#       Option      "XvMC" "true"
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Card0"
        Monitor    "LCD"
#       SubSection  "Display"
#                   Depth   24
#                    Virtual 2680 1050
#       EndSubSection 
#       DefaultDepth     24
#       SubSection "Display"
#               Depth     24
#               Modes    "1400x1050" "1280x1024" "1024x768"
#       EndSubSection
EndSection

Section "DRI"
        Group        0
        Mode         0666
EndSection

If your PC is no notebook, you have to replace the "touchpad" input device with your entry for "Mouse0" and change the entry in "ServerLayout" accordingly.

signature.asc
Description: OpenPGP digital signature