On Wed, Jul 30, 2008 at 12:32 AM, Andrey Falko <[EMAIL PROTECTED]> wrote:
> On Tue, Jul 29, 2008 at 3:42 PM, Daniel D Jones
> <[EMAIL PROTECTED]> wrote:
>> Anyone have a clue as to what would cause the following error:
>>
>>>>> Install sdl-perl-2.1.3-r3
>> into /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/ category dev-perl
>> WARNING: Can't figure out install path for types: arch lib
>> Files will not be installed.
>>
>> The package is already installed, so it succeeded at one time, but
>> revdep-rebuild wants to reinstall it and it keeps failing. I believe the
>> above is the issue, but I'll paste the full output from the installation
>> attempt below. There is also this error:
>>
>> Error: 'GLint' not in typemap in OpenGL.xs, line 2099
>>
>> but the process appears to continue after that and I don't _think_ that's
>> causing the ultimate failure.
>>
>> Thanks in advance for any assistance.
>>
>> -------------------------------------------------------------------------------------
>>
>> # emerge sdl-perl
>> Calculating dependencies... done!
>>>>> Verifying ebuild Manifests...
>>
>>>>> Emerging (1 of 1) dev-perl/sdl-perl-2.1.3-r3 to /
>> * SDL_Perl-2.1.3.tar.gz RMD160 SHA1 SHA256 size ;-) ...
>> [ ok ]
>> * checking ebuild checksums ;-) ...
>> [ ok ]
>> * checking auxfile checksums ;-) ...
>> [ ok ]
>> * checking miscfile checksums ;-) ...
>> [ ok ]
>> * checking SDL_Perl-2.1.3.tar.gz ;-) ...
>> [ ok ]
>>>>> Unpacking source...
>>>>> Unpacking SDL_Perl-2.1.3.tar.gz
>> to /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/work
>> * Applying sdl-2.1.3.build.patch ...
>> [ ok ]
>> * Applying sdl-perl-2.1.3-gfxPie.patch ...
>> [ ok ]
>>>>> Source unpacked.
>>>>> Compiling source
>> in /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/work/SDL_Perl-2.1.3 ...
>> * Using Module::Build
>> Checking whether your kit is complete...
>> Looks good
>>
>> Checking prerequisites...
>> Looks good
>>
>> Creating new 'Build' script for 'SDL_Perl' version '2.1.3'
>> Copying lib/SDL/Tutorial/Animation.pm -> blib/lib/SDL/Tutorial/Animation.pm
>> Copying lib/SDL/Surface.pm -> blib/lib/SDL/Surface.pm
>> Copying lib/SDL/Rect.pm -> blib/lib/SDL/Rect.pm
>> Copying lib/SDL/Palette.pm -> blib/lib/SDL/Palette.pm
>> Copying lib/SDL/MPEG.pm -> blib/lib/SDL/MPEG.pm
>> Copying lib/SDL/SFont.pm -> blib/lib/SDL/SFont.pm
>> Copying lib/SDL/Tool/Graphic.pm -> blib/lib/SDL/Tool/Graphic.pm
>> Copying lib/SDL/Tutorial/Drawing.pm -> blib/lib/SDL/Tutorial/Drawing.pm
>> Copying lib/SDL/Cursor.pm -> blib/lib/SDL/Cursor.pm
>> Copying lib/SDL/Video.pm -> blib/lib/SDL/Video.pm
>> Copying lib/SDL/Event.pm -> blib/lib/SDL/Event.pm
>> Copying lib/SDL/Tutorial.pm -> blib/lib/SDL/Tutorial.pm
>> Copying lib/SDL/Mixer.pm -> blib/lib/SDL/Mixer.pm
>> Copying lib/SDL/Sound.pm -> blib/lib/SDL/Sound.pm
>> Copying lib/SDL/OpenGL.pm -> blib/lib/SDL/OpenGL.pm
>> Copying lib/SDL.pm -> blib/lib/SDL.pm
>> Copying lib/SDL/Font.pm -> blib/lib/SDL/Font.pm
>> Copying lib/SDL/Timer.pm -> blib/lib/SDL/Timer.pm
>> Copying lib/SDL/Music.pm -> blib/lib/SDL/Music.pm
>> Copying lib/SDL/OpenGL/Constants.pm -> blib/lib/SDL/OpenGL/Constants.pm
>> Copying lib/SDL/Color.pm -> blib/lib/SDL/Color.pm
>> Copying lib/SDL/Config.pm -> blib/lib/SDL/Config.pm
>> Copying lib/SDL/Tool/Font.pm -> blib/lib/SDL/Tool/Font.pm
>> Copying lib/SDL_perl.pm -> blib/lib/SDL_perl.pm
>> Copying lib/SDL/Cdrom.pm -> blib/lib/SDL/Cdrom.pm
>> Copying lib/SDL/Tutorial/Images.pm -> blib/lib/SDL/Tutorial/Images.pm
>> Copying lib/SDL/App.pm -> blib/lib/SDL/App.pm
>> Copying lib/SDL/TTFont.pm -> blib/lib/SDL/TTFont.pm
>> Copying lib/SDL/Constants.pm -> blib/lib/SDL/Constants.pm
>> Copying src/SDL.xs -> ./SDL_perl.xs
>> ./SDL_perl.xs -> ./SDL_perl.c
>> cc -I/usr/local/lib/perl5/5.10.0/x86_64-linux/CORE -DXS_VERSION="2.1.3"
>> -DVERSION="2.1.3" -fPIC -I/usr/X11R6/include -I/usr/include/smpeg
>> -I/usr/include/SDL -I/usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT
>> -DHAVE_PNG -DHAVE_SDL -DHAVE_SDL_TTF -DHAVE_SDL_NET -DHAVE_SDL_IMAGE
>> -DHAVE_SDL_GFX -DHAVE_JPEG -DHAVE_SMPEG -DHAVE_SDL_MIXER -fPIC -c
>> -fno-strict-aliasing -pipe -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64
>> -I/usr/include/gdbm -O2 -o ./SDL_perl.o ./SDL_perl.c
>> ./SDL_perl.xs: In function 'XS_SDL_NetResolveIP':
>> ./SDL_perl.xs:2449: warning: assignment discards qualifiers from pointer
>> target type
>> ExtUtils::Mkbootstrap::Mkbootstrap('blib/arch/auto/SDL_perl/SDL_perl.bs')
>> cc -shared -O2 -L/usr/local/lib -o
>> blib/arch/auto/SDL_perl/SDL_perl.so ./SDL_perl.o -L/usr/lib -L/usr/X11R6/lib
>> -lSDL -lpthread -lpng -lSDL -lSDL_ttf -lSDL_net -lSDL_image -lSDL_gfx -ljpeg
>> -lsmpeg -lSDL_mixer
>> Copying src/SFont.xs -> SDL/SFont.xs
>> SDL/SFont.xs -> SDL/SFont.c
>> cc -I/usr/local/lib/perl5/5.10.0/x86_64-linux/CORE -DXS_VERSION="2.1.3"
>> -DVERSION="2.1.3" -fPIC -I/usr/include/SDL -I/usr/include/SDL
>> -D_GNU_SOURCE=1 -D_REENTRANT -DHAVE_SDL_IMAGE -DHAVE_SDL -fPIC -c
>> -fno-strict-aliasing -pipe -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64
>> -I/usr/include/gdbm -O2 -o
>> SDL/SFont.o SDL/SFont.c
>> ExtUtils::Mkbootstrap::Mkbootstrap('blib/arch/auto/SDL/SFont/SFont.bs')
>> cc -shared -O2 -L/usr/local/lib -o blib/arch/auto/SDL/SFont/SFont.so
>> SDL/SFont.o -L/usr/lib -lSDL -lpthread -lSDL_image -lSDL
>> Copying src/OpenGL.xs -> SDL/OpenGL.xs
>> SDL/OpenGL.xs -> SDL/OpenGL.c
>> Use of uninitialized value within %ExtUtils::ParseXS::type_kind in hash
>> element at /usr/local/lib/perl5/5.10.0/ExtUtils/ParseXS.pm line 682, <GEN25>
>> line 2101.
>> Use of uninitialized value within %ExtUtils::ParseXS::type_kind in hash
>> element at /usr/local/lib/perl5/5.10.0/ExtUtils/ParseXS.pm line 747, <GEN25>
>> line 2101.
>> Error: 'GLint' not in typemap in OpenGL.xs, line 2099
>> cc -I/usr/local/lib/perl5/5.10.0/x86_64-linux/CORE -DXS_VERSION="2.1.3"
>> -DVERSION="2.1.3" -fPIC -I/usr/X11R6/include/GL -I/usr/include/SDL
>> -I/usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -DHAVE_GL -DHAVE_SDL
>> -DHAVE_GLU -fPIC -c -fno-strict-aliasing -pipe -D_LARGEFILE_SOURCE
>> -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -o
>> SDL/OpenGL.o SDL/OpenGL.c
>> ExtUtils::Mkbootstrap::Mkbootstrap('blib/arch/auto/SDL/OpenGL/OpenGL.bs')
>> cc -shared -O2 -L/usr/local/lib -o blib/arch/auto/SDL/OpenGL/OpenGL.so
>> SDL/OpenGL.o -L/usr/lib -L/usr/X11R6/lib -lSDL -lpthread -lGL -lSDL -lGLU
>> Manifying blib/lib/SDL/MPEG.pm -> blib/libdoc/SDL::MPEG.3
>> Manifying blib/lib/SDL/Tutorial/Animation.pm ->
>> blib/libdoc/SDL::Tutorial::Animation.3
>> Manifying blib/lib/SDL/Event.pm -> blib/libdoc/SDL::Event.3
>> Manifying blib/lib/SDL/Font.pm -> blib/libdoc/SDL::Font.3
>> Manifying blib/lib/SDL/Surface.pm -> blib/libdoc/SDL::Surface.3
>> Manifying blib/lib/SDL/Rect.pm -> blib/libdoc/SDL::Rect.3
>> Manifying blib/lib/SDL/Cdrom.pm -> blib/libdoc/SDL::Cdrom.3
>> Manifying blib/lib/SDL/Tutorial/Images.pm ->
>> blib/libdoc/SDL::Tutorial::Images.3
>> Manifying blib/lib/SDL/Music.pm -> blib/libdoc/SDL::Music.3
>> Manifying blib/lib/SDL/Mixer.pm -> blib/libdoc/SDL::Mixer.3
>> Manifying blib/lib/SDL/Timer.pm -> blib/libdoc/SDL::Timer.3
>> Manifying blib/lib/SDL/Tutorial.pm -> blib/libdoc/SDL::Tutorial.3
>> Manifying blib/lib/SDL/TTFont.pm -> blib/libdoc/SDL::TTFont.3
>> Manifying blib/lib/SDL/Cursor.pm -> blib/libdoc/SDL::Cursor.3
>> Manifying blib/lib/SDL/Tutorial/Drawing.pm ->
>> blib/libdoc/SDL::Tutorial::Drawing.3
>> Manifying blib/lib/SDL.pm -> blib/libdoc/SDL.3
>> Manifying blib/lib/SDL/Color.pm -> blib/libdoc/SDL::Color.3
>> Manifying blib/lib/SDL/Palette.pm -> blib/libdoc/SDL::Palette.3
>> Manifying blib/lib/SDL/Sound.pm -> blib/libdoc/SDL::Sound.3
>> Manifying blib/lib/SDL/SFont.pm -> blib/libdoc/SDL::SFont.3
>> Manifying blib/lib/SDL/Tool/Graphic.pm -> blib/libdoc/SDL::Tool::Graphic.3
>> Manifying blib/lib/SDL/Tool/Font.pm -> blib/libdoc/SDL::Tool::Font.3
>> Manifying blib/lib/SDL/OpenGL.pm -> blib/libdoc/SDL::OpenGL.3
>> Manifying blib/lib/SDL/Video.pm -> blib/libdoc/SDL::Video.3
>> Manifying blib/lib/SDL/App.pm -> blib/libdoc/SDL::App.3
>>>>> Source compiled.
>>>>> Test phase [not enabled]: dev-perl/sdl-perl-2.1.3-r3
>>
>>>>> Install sdl-perl-2.1.3-r3
>> into /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/ category dev-perl
>> WARNING: Can't figure out install path for types: arch lib
>> Files will not be installed.
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Tutorial.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::SFont.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Surface.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Tutorial::Animation.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Palette.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Event.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Color.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::OpenGL.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Timer.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Tool::Graphic.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Cursor.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::MPEG.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Music.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Tool::Font.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Cdrom.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Tutorial::Drawing.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::App.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Tutorial::Images.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Rect.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Mixer.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Video.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Font.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Sound.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::TTFont.3
>> * Cleaning out stray man files
>> *
>> * ERROR: dev-perl/sdl-perl-2.1.3-r3 failed.
>> * Call stack:
>> * ebuild.sh, line 49: Called src_install
>> * environment, line 2324: Called die
>> * The specific snippet of code:
>> * die "failed to install properly";
>> * The die message:
>> * failed to install properly
>> *
>> * If you need support, post the topmost build error, and the call stack if
>> relevant.
>> * A complete build log is located
>> at '/var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/temp/build.log'.
>> * The ebuild environment file is located
>> at '/var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/temp/environment'.
>> *
>>
>> * Messages for package dev-perl/sdl-perl-2.1.3-r3:
>>
>> *
>> * ERROR: dev-perl/sdl-perl-2.1.3-r3 failed.
>> * Call stack:
>> * ebuild.sh, line 49: Called src_install
>> * environment, line 2324: Called die
>> * The specific snippet of code:
>> * die "failed to install properly";
>> * The die message:
>> * failed to install properly
>> *
>> * If you need support, post the topmost build error, and the call stack if
>> relevant.
>> * A complete build log is located
>> at '/var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/temp/build.log'.
>> * The ebuild environment file is located
>> at '/var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/temp/environment'.
>> *
>> #
>>
>>
>
> Can you give us the output of emerge --debug
>>
>> -------------------------------------------------------------------------------------
>>
>> # emerge sdl-perl
>> Calculating dependencies... done!
>>>>> Verifying ebuild Manifests...
>>
>>>>> Emerging (1 of 1) dev-perl/sdl-perl-2.1.3-r3 to /
>> * SDL_Perl-2.1.3.tar.gz RMD160 SHA1 SHA256 size ;-) ...
>> [ ok ]
>> * checking ebuild checksums ;-) ...
>> [ ok ]
>> * checking auxfile checksums ;-) ...
>> [ ok ]
>> * checking miscfile checksums ;-) ...
>> [ ok ]
>> * checking SDL_Perl-2.1.3.tar.gz ;-) ...
>> [ ok ]
>>>>> Unpacking source...
>>>>> Unpacking SDL_Perl-2.1.3.tar.gz
>> to /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/work
>> * Applying sdl-2.1.3.build.patch ...
>> [ ok ]
>> * Applying sdl-perl-2.1.3-gfxPie.patch ...
>> [ ok ]
>>>>> Source unpacked.
>>>>> Compiling source
>> in /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/work/SDL_Perl-2.1.3 ...
>> * Using Module::Build
>> Checking whether your kit is complete...
>> Looks good
>>
>> Checking prerequisites...
>> Looks good
>>
>> Creating new 'Build' script for 'SDL_Perl' version '2.1.3'
>> Copying lib/SDL/Tutorial/Animation.pm -> blib/lib/SDL/Tutorial/Animation.pm
>> Copying lib/SDL/Surface.pm -> blib/lib/SDL/Surface.pm
>> Copying lib/SDL/Rect.pm -> blib/lib/SDL/Rect.pm
>> Copying lib/SDL/Palette.pm -> blib/lib/SDL/Palette.pm
>> Copying lib/SDL/MPEG.pm -> blib/lib/SDL/MPEG.pm
>> Copying lib/SDL/SFont.pm -> blib/lib/SDL/SFont.pm
>> Copying lib/SDL/Tool/Graphic.pm -> blib/lib/SDL/Tool/Graphic.pm
>> Copying lib/SDL/Tutorial/Drawing.pm -> blib/lib/SDL/Tutorial/Drawing.pm
>> Copying lib/SDL/Cursor.pm -> blib/lib/SDL/Cursor.pm
>> Copying lib/SDL/Video.pm -> blib/lib/SDL/Video.pm
>> Copying lib/SDL/Event.pm -> blib/lib/SDL/Event.pm
>> Copying lib/SDL/Tutorial.pm -> blib/lib/SDL/Tutorial.pm
>> Copying lib/SDL/Mixer.pm -> blib/lib/SDL/Mixer.pm
>> Copying lib/SDL/Sound.pm -> blib/lib/SDL/Sound.pm
>> Copying lib/SDL/OpenGL.pm -> blib/lib/SDL/OpenGL.pm
>> Copying lib/SDL.pm -> blib/lib/SDL.pm
>> Copying lib/SDL/Font.pm -> blib/lib/SDL/Font.pm
>> Copying lib/SDL/Timer.pm -> blib/lib/SDL/Timer.pm
>> Copying lib/SDL/Music.pm -> blib/lib/SDL/Music.pm
>> Copying lib/SDL/OpenGL/Constants.pm -> blib/lib/SDL/OpenGL/Constants.pm
>> Copying lib/SDL/Color.pm -> blib/lib/SDL/Color.pm
>> Copying lib/SDL/Config.pm -> blib/lib/SDL/Config.pm
>> Copying lib/SDL/Tool/Font.pm -> blib/lib/SDL/Tool/Font.pm
>> Copying lib/SDL_perl.pm -> blib/lib/SDL_perl.pm
>> Copying lib/SDL/Cdrom.pm -> blib/lib/SDL/Cdrom.pm
>> Copying lib/SDL/Tutorial/Images.pm -> blib/lib/SDL/Tutorial/Images.pm
>> Copying lib/SDL/App.pm -> blib/lib/SDL/App.pm
>> Copying lib/SDL/TTFont.pm -> blib/lib/SDL/TTFont.pm
>> Copying lib/SDL/Constants.pm -> blib/lib/SDL/Constants.pm
>> Copying src/SDL.xs -> ./SDL_perl.xs
>> ./SDL_perl.xs -> ./SDL_perl.c
>> cc -I/usr/local/lib/perl5/5.10.0/x86_64-linux/CORE -DXS_VERSION="2.1.3"
>> -DVERSION="2.1.3" -fPIC -I/usr/X11R6/include -I/usr/include/smpeg
>> -I/usr/include/SDL -I/usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT
>> -DHAVE_PNG -DHAVE_SDL -DHAVE_SDL_TTF -DHAVE_SDL_NET -DHAVE_SDL_IMAGE
>> -DHAVE_SDL_GFX -DHAVE_JPEG -DHAVE_SMPEG -DHAVE_SDL_MIXER -fPIC -c
>> -fno-strict-aliasing -pipe -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64
>> -I/usr/include/gdbm -O2 -o ./SDL_perl.o ./SDL_perl.c
>> ./SDL_perl.xs: In function 'XS_SDL_NetResolveIP':
>> ./SDL_perl.xs:2449: warning: assignment discards qualifiers from pointer
>> target type
>> ExtUtils::Mkbootstrap::Mkbootstrap('blib/arch/auto/SDL_perl/SDL_perl.bs')
>> cc -shared -O2 -L/usr/local/lib -o
>> blib/arch/auto/SDL_perl/SDL_perl.so ./SDL_perl.o -L/usr/lib -L/usr/X11R6/lib
>> -lSDL -lpthread -lpng -lSDL -lSDL_ttf -lSDL_net -lSDL_image -lSDL_gfx -ljpeg
>> -lsmpeg -lSDL_mixer
>> Copying src/SFont.xs -> SDL/SFont.xs
>> SDL/SFont.xs -> SDL/SFont.c
>> cc -I/usr/local/lib/perl5/5.10.0/x86_64-linux/CORE -DXS_VERSION="2.1.3"
>> -DVERSION="2.1.3" -fPIC -I/usr/include/SDL -I/usr/include/SDL
>> -D_GNU_SOURCE=1 -D_REENTRANT -DHAVE_SDL_IMAGE -DHAVE_SDL -fPIC -c
>> -fno-strict-aliasing -pipe -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64
>> -I/usr/include/gdbm -O2 -o
>> SDL/SFont.o SDL/SFont.c
>> ExtUtils::Mkbootstrap::Mkbootstrap('blib/arch/auto/SDL/SFont/SFont.bs')
>> cc -shared -O2 -L/usr/local/lib -o blib/arch/auto/SDL/SFont/SFont.so
>> SDL/SFont.o -L/usr/lib -lSDL -lpthread -lSDL_image -lSDL
>> Copying src/OpenGL.xs -> SDL/OpenGL.xs
>> SDL/OpenGL.xs -> SDL/OpenGL.c
>> Use of uninitialized value within %ExtUtils::ParseXS::type_kind in hash
>> element at /usr/local/lib/perl5/5.10.0/ExtUtils/ParseXS.pm line 682, <GEN25>
>> line 2101.
>> Use of uninitialized value within %ExtUtils::ParseXS::type_kind in hash
>> element at /usr/local/lib/perl5/5.10.0/ExtUtils/ParseXS.pm line 747, <GEN25>
>> line 2101.
>> Error: 'GLint' not in typemap in OpenGL.xs, line 2099
>> cc -I/usr/local/lib/perl5/5.10.0/x86_64-linux/CORE -DXS_VERSION="2.1.3"
>> -DVERSION="2.1.3" -fPIC -I/usr/X11R6/include/GL -I/usr/include/SDL
>> -I/usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -DHAVE_GL -DHAVE_SDL
>> -DHAVE_GLU -fPIC -c -fno-strict-aliasing -pipe -D_LARGEFILE_SOURCE
>> -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -o
>> SDL/OpenGL.o SDL/OpenGL.c
>> ExtUtils::Mkbootstrap::Mkbootstrap('blib/arch/auto/SDL/OpenGL/OpenGL.bs')
>> cc -shared -O2 -L/usr/local/lib -o blib/arch/auto/SDL/OpenGL/OpenGL.so
>> SDL/OpenGL.o -L/usr/lib -L/usr/X11R6/lib -lSDL -lpthread -lGL -lSDL -lGLU
>> Manifying blib/lib/SDL/MPEG.pm -> blib/libdoc/SDL::MPEG.3
>> Manifying blib/lib/SDL/Tutorial/Animation.pm ->
>> blib/libdoc/SDL::Tutorial::Animation.3
>> Manifying blib/lib/SDL/Event.pm -> blib/libdoc/SDL::Event.3
>> Manifying blib/lib/SDL/Font.pm -> blib/libdoc/SDL::Font.3
>> Manifying blib/lib/SDL/Surface.pm -> blib/libdoc/SDL::Surface.3
>> Manifying blib/lib/SDL/Rect.pm -> blib/libdoc/SDL::Rect.3
>> Manifying blib/lib/SDL/Cdrom.pm -> blib/libdoc/SDL::Cdrom.3
>> Manifying blib/lib/SDL/Tutorial/Images.pm ->
>> blib/libdoc/SDL::Tutorial::Images.3
>> Manifying blib/lib/SDL/Music.pm -> blib/libdoc/SDL::Music.3
>> Manifying blib/lib/SDL/Mixer.pm -> blib/libdoc/SDL::Mixer.3
>> Manifying blib/lib/SDL/Timer.pm -> blib/libdoc/SDL::Timer.3
>> Manifying blib/lib/SDL/Tutorial.pm -> blib/libdoc/SDL::Tutorial.3
>> Manifying blib/lib/SDL/TTFont.pm -> blib/libdoc/SDL::TTFont.3
>> Manifying blib/lib/SDL/Cursor.pm -> blib/libdoc/SDL::Cursor.3
>> Manifying blib/lib/SDL/Tutorial/Drawing.pm ->
>> blib/libdoc/SDL::Tutorial::Drawing.3
>> Manifying blib/lib/SDL.pm -> blib/libdoc/SDL.3
>> Manifying blib/lib/SDL/Color.pm -> blib/libdoc/SDL::Color.3
>> Manifying blib/lib/SDL/Palette.pm -> blib/libdoc/SDL::Palette.3
>> Manifying blib/lib/SDL/Sound.pm -> blib/libdoc/SDL::Sound.3
>> Manifying blib/lib/SDL/SFont.pm -> blib/libdoc/SDL::SFont.3
>> Manifying blib/lib/SDL/Tool/Graphic.pm -> blib/libdoc/SDL::Tool::Graphic.3
>> Manifying blib/lib/SDL/Tool/Font.pm -> blib/libdoc/SDL::Tool::Font.3
>> Manifying blib/lib/SDL/OpenGL.pm -> blib/libdoc/SDL::OpenGL.3
>> Manifying blib/lib/SDL/Video.pm -> blib/libdoc/SDL::Video.3
>> Manifying blib/lib/SDL/App.pm -> blib/libdoc/SDL::App.3
>>>>> Source compiled.
>>>>> Test phase [not enabled]: dev-perl/sdl-perl-2.1.3-r3
>>
>>>>> Install sdl-perl-2.1.3-r3
>> into /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/ category dev-perl
>> WARNING: Can't figure out install path for types: arch lib
>> Files will not be installed.
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Tutorial.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::SFont.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Surface.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Tutorial::Animation.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Palette.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Event.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Color.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::OpenGL.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Timer.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Tool::Graphic.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Cursor.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::MPEG.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Music.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Tool::Font.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Cdrom.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Tutorial::Drawing.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::App.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Tutorial::Images.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Rect.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Mixer.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Video.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Font.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Sound.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::TTFont.3
>> * Cleaning out stray man files
>> *
>> * ERROR: dev-perl/sdl-perl-2.1.3-r3 failed.
>> * Call stack:
>> * ebuild.sh, line 49: Called src_install
>> * environment, line 2324: Called die
>> * The specific snippet of code:
>> * die "failed to install properly";
>> * The die message:
>> * failed to install properly
>> *
>> * If you need support, post the topmost build error, and the call stack if
>> relevant.
>> * A complete build log is located
>> at '/var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/temp/build.log'.
>> * The ebuild environment file is located
>> at '/var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/temp/environment'.
>> *
>>
>> * Messages for package dev-perl/sdl-perl-2.1.3-r3:
>>
>> *
>> * ERROR: dev-perl/sdl-perl-2.1.3-r3 failed.
>> * Call stack:
>> * ebuild.sh, line 49: Called src_install
>> * environment, line 2324: Called die
>> * The specific snippet of code:
>> * die "failed to install properly";
>> * The die message:
>> * failed to install properly
>> *
>> * If you need support, post the topmost build error, and the call stack if
>> relevant.
>> * A complete build log is located
>> at '/var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/temp/build.log'.
>> * The ebuild environment file is located
>> at '/var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/temp/environment'.
>> *
>> #
>>
>>
>
> Can you give us the output of emerge --debug
>>
>> -------------------------------------------------------------------------------------
>>
>> # emerge sdl-perl
>> Calculating dependencies... done!
>>>>> Verifying ebuild Manifests...
>>
>>>>> Emerging (1 of 1) dev-perl/sdl-perl-2.1.3-r3 to /
>> * SDL_Perl-2.1.3.tar.gz RMD160 SHA1 SHA256 size ;-) ...
>> [ ok ]
>> * checking ebuild checksums ;-) ...
>> [ ok ]
>> * checking auxfile checksums ;-) ...
>> [ ok ]
>> * checking miscfile checksums ;-) ...
>> [ ok ]
>> * checking SDL_Perl-2.1.3.tar.gz ;-) ...
>> [ ok ]
>>>>> Unpacking source...
>>>>> Unpacking SDL_Perl-2.1.3.tar.gz
>> to /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/work
>> * Applying sdl-2.1.3.build.patch ...
>> [ ok ]
>> * Applying sdl-perl-2.1.3-gfxPie.patch ...
>> [ ok ]
>>>>> Source unpacked.
>>>>> Compiling source
>> in /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/work/SDL_Perl-2.1.3 ...
>> * Using Module::Build
>> Checking whether your kit is complete...
>> Looks good
>>
>> Checking prerequisites...
>> Looks good
>>
>> Creating new 'Build' script for 'SDL_Perl' version '2.1.3'
>> Copying lib/SDL/Tutorial/Animation.pm -> blib/lib/SDL/Tutorial/Animation.pm
>> Copying lib/SDL/Surface.pm -> blib/lib/SDL/Surface.pm
>> Copying lib/SDL/Rect.pm -> blib/lib/SDL/Rect.pm
>> Copying lib/SDL/Palette.pm -> blib/lib/SDL/Palette.pm
>> Copying lib/SDL/MPEG.pm -> blib/lib/SDL/MPEG.pm
>> Copying lib/SDL/SFont.pm -> blib/lib/SDL/SFont.pm
>> Copying lib/SDL/Tool/Graphic.pm -> blib/lib/SDL/Tool/Graphic.pm
>> Copying lib/SDL/Tutorial/Drawing.pm -> blib/lib/SDL/Tutorial/Drawing.pm
>> Copying lib/SDL/Cursor.pm -> blib/lib/SDL/Cursor.pm
>> Copying lib/SDL/Video.pm -> blib/lib/SDL/Video.pm
>> Copying lib/SDL/Event.pm -> blib/lib/SDL/Event.pm
>> Copying lib/SDL/Tutorial.pm -> blib/lib/SDL/Tutorial.pm
>> Copying lib/SDL/Mixer.pm -> blib/lib/SDL/Mixer.pm
>> Copying lib/SDL/Sound.pm -> blib/lib/SDL/Sound.pm
>> Copying lib/SDL/OpenGL.pm -> blib/lib/SDL/OpenGL.pm
>> Copying lib/SDL.pm -> blib/lib/SDL.pm
>> Copying lib/SDL/Font.pm -> blib/lib/SDL/Font.pm
>> Copying lib/SDL/Timer.pm -> blib/lib/SDL/Timer.pm
>> Copying lib/SDL/Music.pm -> blib/lib/SDL/Music.pm
>> Copying lib/SDL/OpenGL/Constants.pm -> blib/lib/SDL/OpenGL/Constants.pm
>> Copying lib/SDL/Color.pm -> blib/lib/SDL/Color.pm
>> Copying lib/SDL/Config.pm -> blib/lib/SDL/Config.pm
>> Copying lib/SDL/Tool/Font.pm -> blib/lib/SDL/Tool/Font.pm
>> Copying lib/SDL_perl.pm -> blib/lib/SDL_perl.pm
>> Copying lib/SDL/Cdrom.pm -> blib/lib/SDL/Cdrom.pm
>> Copying lib/SDL/Tutorial/Images.pm -> blib/lib/SDL/Tutorial/Images.pm
>> Copying lib/SDL/App.pm -> blib/lib/SDL/App.pm
>> Copying lib/SDL/TTFont.pm -> blib/lib/SDL/TTFont.pm
>> Copying lib/SDL/Constants.pm -> blib/lib/SDL/Constants.pm
>> Copying src/SDL.xs -> ./SDL_perl.xs
>> ./SDL_perl.xs -> ./SDL_perl.c
>> cc -I/usr/local/lib/perl5/5.10.0/x86_64-linux/CORE -DXS_VERSION="2.1.3"
>> -DVERSION="2.1.3" -fPIC -I/usr/X11R6/include -I/usr/include/smpeg
>> -I/usr/include/SDL -I/usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT
>> -DHAVE_PNG -DHAVE_SDL -DHAVE_SDL_TTF -DHAVE_SDL_NET -DHAVE_SDL_IMAGE
>> -DHAVE_SDL_GFX -DHAVE_JPEG -DHAVE_SMPEG -DHAVE_SDL_MIXER -fPIC -c
>> -fno-strict-aliasing -pipe -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64
>> -I/usr/include/gdbm -O2 -o ./SDL_perl.o ./SDL_perl.c
>> ./SDL_perl.xs: In function 'XS_SDL_NetResolveIP':
>> ./SDL_perl.xs:2449: warning: assignment discards qualifiers from pointer
>> target type
>> ExtUtils::Mkbootstrap::Mkbootstrap('blib/arch/auto/SDL_perl/SDL_perl.bs')
>> cc -shared -O2 -L/usr/local/lib -o
>> blib/arch/auto/SDL_perl/SDL_perl.so ./SDL_perl.o -L/usr/lib -L/usr/X11R6/lib
>> -lSDL -lpthread -lpng -lSDL -lSDL_ttf -lSDL_net -lSDL_image -lSDL_gfx -ljpeg
>> -lsmpeg -lSDL_mixer
>> Copying src/SFont.xs -> SDL/SFont.xs
>> SDL/SFont.xs -> SDL/SFont.c
>> cc -I/usr/local/lib/perl5/5.10.0/x86_64-linux/CORE -DXS_VERSION="2.1.3"
>> -DVERSION="2.1.3" -fPIC -I/usr/include/SDL -I/usr/include/SDL
>> -D_GNU_SOURCE=1 -D_REENTRANT -DHAVE_SDL_IMAGE -DHAVE_SDL -fPIC -c
>> -fno-strict-aliasing -pipe -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64
>> -I/usr/include/gdbm -O2 -o
>> SDL/SFont.o SDL/SFont.c
>> ExtUtils::Mkbootstrap::Mkbootstrap('blib/arch/auto/SDL/SFont/SFont.bs')
>> cc -shared -O2 -L/usr/local/lib -o blib/arch/auto/SDL/SFont/SFont.so
>> SDL/SFont.o -L/usr/lib -lSDL -lpthread -lSDL_image -lSDL
>> Copying src/OpenGL.xs -> SDL/OpenGL.xs
>> SDL/OpenGL.xs -> SDL/OpenGL.c
>> Use of uninitialized value within %ExtUtils::ParseXS::type_kind in hash
>> element at /usr/local/lib/perl5/5.10.0/ExtUtils/ParseXS.pm line 682, <GEN25>
>> line 2101.
>> Use of uninitialized value within %ExtUtils::ParseXS::type_kind in hash
>> element at /usr/local/lib/perl5/5.10.0/ExtUtils/ParseXS.pm line 747, <GEN25>
>> line 2101.
>> Error: 'GLint' not in typemap in OpenGL.xs, line 2099
>> cc -I/usr/local/lib/perl5/5.10.0/x86_64-linux/CORE -DXS_VERSION="2.1.3"
>> -DVERSION="2.1.3" -fPIC -I/usr/X11R6/include/GL -I/usr/include/SDL
>> -I/usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -DHAVE_GL -DHAVE_SDL
>> -DHAVE_GLU -fPIC -c -fno-strict-aliasing -pipe -D_LARGEFILE_SOURCE
>> -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -o
>> SDL/OpenGL.o SDL/OpenGL.c
>> ExtUtils::Mkbootstrap::Mkbootstrap('blib/arch/auto/SDL/OpenGL/OpenGL.bs')
>> cc -shared -O2 -L/usr/local/lib -o blib/arch/auto/SDL/OpenGL/OpenGL.so
>> SDL/OpenGL.o -L/usr/lib -L/usr/X11R6/lib -lSDL -lpthread -lGL -lSDL -lGLU
>> Manifying blib/lib/SDL/MPEG.pm -> blib/libdoc/SDL::MPEG.3
>> Manifying blib/lib/SDL/Tutorial/Animation.pm ->
>> blib/libdoc/SDL::Tutorial::Animation.3
>> Manifying blib/lib/SDL/Event.pm -> blib/libdoc/SDL::Event.3
>> Manifying blib/lib/SDL/Font.pm -> blib/libdoc/SDL::Font.3
>> Manifying blib/lib/SDL/Surface.pm -> blib/libdoc/SDL::Surface.3
>> Manifying blib/lib/SDL/Rect.pm -> blib/libdoc/SDL::Rect.3
>> Manifying blib/lib/SDL/Cdrom.pm -> blib/libdoc/SDL::Cdrom.3
>> Manifying blib/lib/SDL/Tutorial/Images.pm ->
>> blib/libdoc/SDL::Tutorial::Images.3
>> Manifying blib/lib/SDL/Music.pm -> blib/libdoc/SDL::Music.3
>> Manifying blib/lib/SDL/Mixer.pm -> blib/libdoc/SDL::Mixer.3
>> Manifying blib/lib/SDL/Timer.pm -> blib/libdoc/SDL::Timer.3
>> Manifying blib/lib/SDL/Tutorial.pm -> blib/libdoc/SDL::Tutorial.3
>> Manifying blib/lib/SDL/TTFont.pm -> blib/libdoc/SDL::TTFont.3
>> Manifying blib/lib/SDL/Cursor.pm -> blib/libdoc/SDL::Cursor.3
>> Manifying blib/lib/SDL/Tutorial/Drawing.pm ->
>> blib/libdoc/SDL::Tutorial::Drawing.3
>> Manifying blib/lib/SDL.pm -> blib/libdoc/SDL.3
>> Manifying blib/lib/SDL/Color.pm -> blib/libdoc/SDL::Color.3
>> Manifying blib/lib/SDL/Palette.pm -> blib/libdoc/SDL::Palette.3
>> Manifying blib/lib/SDL/Sound.pm -> blib/libdoc/SDL::Sound.3
>> Manifying blib/lib/SDL/SFont.pm -> blib/libdoc/SDL::SFont.3
>> Manifying blib/lib/SDL/Tool/Graphic.pm -> blib/libdoc/SDL::Tool::Graphic.3
>> Manifying blib/lib/SDL/Tool/Font.pm -> blib/libdoc/SDL::Tool::Font.3
>> Manifying blib/lib/SDL/OpenGL.pm -> blib/libdoc/SDL::OpenGL.3
>> Manifying blib/lib/SDL/Video.pm -> blib/libdoc/SDL::Video.3
>> Manifying blib/lib/SDL/App.pm -> blib/libdoc/SDL::App.3
>>>>> Source compiled.
>>>>> Test phase [not enabled]: dev-perl/sdl-perl-2.1.3-r3
>>
>>>>> Install sdl-perl-2.1.3-r3
>> into /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/ category dev-perl
>> WARNING: Can't figure out install path for types: arch lib
>> Files will not be installed.
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Tutorial.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::SFont.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Surface.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Tutorial::Animation.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Palette.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Event.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Color.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::OpenGL.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Timer.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Tool::Graphic.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Cursor.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::MPEG.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Music.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Tool::Font.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Cdrom.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Tutorial::Drawing.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::App.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Tutorial::Images.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Rect.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Mixer.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Video.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Font.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Sound.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::TTFont.3
>> * Cleaning out stray man files
>> *
>> * ERROR: dev-perl/sdl-perl-2.1.3-r3 failed.
>> * Call stack:
>> * ebuild.sh, line 49: Called src_install
>> * environment, line 2324: Called die
>> * The specific snippet of code:
>> * die "failed to install properly";
>> * The die message:
>> * failed to install properly
>> *
>> * If you need support, post the topmost build error, and the call stack if
>> relevant.
>> * A complete build log is located
>> at '/var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/temp/build.log'.
>> * The ebuild environment file is located
>> at '/var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/temp/environment'.
>> *
>>
>> * Messages for package dev-perl/sdl-perl-2.1.3-r3:
>>
>> *
>> * ERROR: dev-perl/sdl-perl-2.1.3-r3 failed.
>> * Call stack:
>> * ebuild.sh, line 49: Called src_install
>> * environment, line 2324: Called die
>> * The specific snippet of code:
>> * die "failed to install properly";
>> * The die message:
>> * failed to install properly
>> *
>> * If you need support, post the topmost build error, and the call stack if
>> relevant.
>> * A complete build log is located
>> at '/var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/temp/build.log'.
>> * The ebuild environment file is located
>> at '/var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/temp/environment'.
>> *
>> #
>>
>>
>
> Can you give us the output of emerge --debug
>>
>> -------------------------------------------------------------------------------------
>>
>> # emerge sdl-perl
>> Calculating dependencies... done!
>>>>> Verifying ebuild Manifests...
>>
>>>>> Emerging (1 of 1) dev-perl/sdl-perl-2.1.3-r3 to /
>> * SDL_Perl-2.1.3.tar.gz RMD160 SHA1 SHA256 size ;-) ...
>> [ ok ]
>> * checking ebuild checksums ;-) ...
>> [ ok ]
>> * checking auxfile checksums ;-) ...
>> [ ok ]
>> * checking miscfile checksums ;-) ...
>> [ ok ]
>> * checking SDL_Perl-2.1.3.tar.gz ;-) ...
>> [ ok ]
>>>>> Unpacking source...
>>>>> Unpacking SDL_Perl-2.1.3.tar.gz
>> to /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/work
>> * Applying sdl-2.1.3.build.patch ...
>> [ ok ]
>> * Applying sdl-perl-2.1.3-gfxPie.patch ...
>> [ ok ]
>>>>> Source unpacked.
>>>>> Compiling source
>> in /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/work/SDL_Perl-2.1.3 ...
>> * Using Module::Build
>> Checking whether your kit is complete...
>> Looks good
>>
>> Checking prerequisites...
>> Looks good
>>
>> Creating new 'Build' script for 'SDL_Perl' version '2.1.3'
>> Copying lib/SDL/Tutorial/Animation.pm -> blib/lib/SDL/Tutorial/Animation.pm
>> Copying lib/SDL/Surface.pm -> blib/lib/SDL/Surface.pm
>> Copying lib/SDL/Rect.pm -> blib/lib/SDL/Rect.pm
>> Copying lib/SDL/Palette.pm -> blib/lib/SDL/Palette.pm
>> Copying lib/SDL/MPEG.pm -> blib/lib/SDL/MPEG.pm
>> Copying lib/SDL/SFont.pm -> blib/lib/SDL/SFont.pm
>> Copying lib/SDL/Tool/Graphic.pm -> blib/lib/SDL/Tool/Graphic.pm
>> Copying lib/SDL/Tutorial/Drawing.pm -> blib/lib/SDL/Tutorial/Drawing.pm
>> Copying lib/SDL/Cursor.pm -> blib/lib/SDL/Cursor.pm
>> Copying lib/SDL/Video.pm -> blib/lib/SDL/Video.pm
>> Copying lib/SDL/Event.pm -> blib/lib/SDL/Event.pm
>> Copying lib/SDL/Tutorial.pm -> blib/lib/SDL/Tutorial.pm
>> Copying lib/SDL/Mixer.pm -> blib/lib/SDL/Mixer.pm
>> Copying lib/SDL/Sound.pm -> blib/lib/SDL/Sound.pm
>> Copying lib/SDL/OpenGL.pm -> blib/lib/SDL/OpenGL.pm
>> Copying lib/SDL.pm -> blib/lib/SDL.pm
>> Copying lib/SDL/Font.pm -> blib/lib/SDL/Font.pm
>> Copying lib/SDL/Timer.pm -> blib/lib/SDL/Timer.pm
>> Copying lib/SDL/Music.pm -> blib/lib/SDL/Music.pm
>> Copying lib/SDL/OpenGL/Constants.pm -> blib/lib/SDL/OpenGL/Constants.pm
>> Copying lib/SDL/Color.pm -> blib/lib/SDL/Color.pm
>> Copying lib/SDL/Config.pm -> blib/lib/SDL/Config.pm
>> Copying lib/SDL/Tool/Font.pm -> blib/lib/SDL/Tool/Font.pm
>> Copying lib/SDL_perl.pm -> blib/lib/SDL_perl.pm
>> Copying lib/SDL/Cdrom.pm -> blib/lib/SDL/Cdrom.pm
>> Copying lib/SDL/Tutorial/Images.pm -> blib/lib/SDL/Tutorial/Images.pm
>> Copying lib/SDL/App.pm -> blib/lib/SDL/App.pm
>> Copying lib/SDL/TTFont.pm -> blib/lib/SDL/TTFont.pm
>> Copying lib/SDL/Constants.pm -> blib/lib/SDL/Constants.pm
>> Copying src/SDL.xs -> ./SDL_perl.xs
>> ./SDL_perl.xs -> ./SDL_perl.c
>> cc -I/usr/local/lib/perl5/5.10.0/x86_64-linux/CORE -DXS_VERSION="2.1.3"
>> -DVERSION="2.1.3" -fPIC -I/usr/X11R6/include -I/usr/include/smpeg
>> -I/usr/include/SDL -I/usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT
>> -DHAVE_PNG -DHAVE_SDL -DHAVE_SDL_TTF -DHAVE_SDL_NET -DHAVE_SDL_IMAGE
>> -DHAVE_SDL_GFX -DHAVE_JPEG -DHAVE_SMPEG -DHAVE_SDL_MIXER -fPIC -c
>> -fno-strict-aliasing -pipe -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64
>> -I/usr/include/gdbm -O2 -o ./SDL_perl.o ./SDL_perl.c
>> ./SDL_perl.xs: In function 'XS_SDL_NetResolveIP':
>> ./SDL_perl.xs:2449: warning: assignment discards qualifiers from pointer
>> target type
>> ExtUtils::Mkbootstrap::Mkbootstrap('blib/arch/auto/SDL_perl/SDL_perl.bs')
>> cc -shared -O2 -L/usr/local/lib -o
>> blib/arch/auto/SDL_perl/SDL_perl.so ./SDL_perl.o -L/usr/lib -L/usr/X11R6/lib
>> -lSDL -lpthread -lpng -lSDL -lSDL_ttf -lSDL_net -lSDL_image -lSDL_gfx -ljpeg
>> -lsmpeg -lSDL_mixer
>> Copying src/SFont.xs -> SDL/SFont.xs
>> SDL/SFont.xs -> SDL/SFont.c
>> cc -I/usr/local/lib/perl5/5.10.0/x86_64-linux/CORE -DXS_VERSION="2.1.3"
>> -DVERSION="2.1.3" -fPIC -I/usr/include/SDL -I/usr/include/SDL
>> -D_GNU_SOURCE=1 -D_REENTRANT -DHAVE_SDL_IMAGE -DHAVE_SDL -fPIC -c
>> -fno-strict-aliasing -pipe -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64
>> -I/usr/include/gdbm -O2 -o
>> SDL/SFont.o SDL/SFont.c
>> ExtUtils::Mkbootstrap::Mkbootstrap('blib/arch/auto/SDL/SFont/SFont.bs')
>> cc -shared -O2 -L/usr/local/lib -o blib/arch/auto/SDL/SFont/SFont.so
>> SDL/SFont.o -L/usr/lib -lSDL -lpthread -lSDL_image -lSDL
>> Copying src/OpenGL.xs -> SDL/OpenGL.xs
>> SDL/OpenGL.xs -> SDL/OpenGL.c
>> Use of uninitialized value within %ExtUtils::ParseXS::type_kind in hash
>> element at /usr/local/lib/perl5/5.10.0/ExtUtils/ParseXS.pm line 682, <GEN25>
>> line 2101.
>> Use of uninitialized value within %ExtUtils::ParseXS::type_kind in hash
>> element at /usr/local/lib/perl5/5.10.0/ExtUtils/ParseXS.pm line 747, <GEN25>
>> line 2101.
>> Error: 'GLint' not in typemap in OpenGL.xs, line 2099
>> cc -I/usr/local/lib/perl5/5.10.0/x86_64-linux/CORE -DXS_VERSION="2.1.3"
>> -DVERSION="2.1.3" -fPIC -I/usr/X11R6/include/GL -I/usr/include/SDL
>> -I/usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -DHAVE_GL -DHAVE_SDL
>> -DHAVE_GLU -fPIC -c -fno-strict-aliasing -pipe -D_LARGEFILE_SOURCE
>> -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -o
>> SDL/OpenGL.o SDL/OpenGL.c
>> ExtUtils::Mkbootstrap::Mkbootstrap('blib/arch/auto/SDL/OpenGL/OpenGL.bs')
>> cc -shared -O2 -L/usr/local/lib -o blib/arch/auto/SDL/OpenGL/OpenGL.so
>> SDL/OpenGL.o -L/usr/lib -L/usr/X11R6/lib -lSDL -lpthread -lGL -lSDL -lGLU
>> Manifying blib/lib/SDL/MPEG.pm -> blib/libdoc/SDL::MPEG.3
>> Manifying blib/lib/SDL/Tutorial/Animation.pm ->
>> blib/libdoc/SDL::Tutorial::Animation.3
>> Manifying blib/lib/SDL/Event.pm -> blib/libdoc/SDL::Event.3
>> Manifying blib/lib/SDL/Font.pm -> blib/libdoc/SDL::Font.3
>> Manifying blib/lib/SDL/Surface.pm -> blib/libdoc/SDL::Surface.3
>> Manifying blib/lib/SDL/Rect.pm -> blib/libdoc/SDL::Rect.3
>> Manifying blib/lib/SDL/Cdrom.pm -> blib/libdoc/SDL::Cdrom.3
>> Manifying blib/lib/SDL/Tutorial/Images.pm ->
>> blib/libdoc/SDL::Tutorial::Images.3
>> Manifying blib/lib/SDL/Music.pm -> blib/libdoc/SDL::Music.3
>> Manifying blib/lib/SDL/Mixer.pm -> blib/libdoc/SDL::Mixer.3
>> Manifying blib/lib/SDL/Timer.pm -> blib/libdoc/SDL::Timer.3
>> Manifying blib/lib/SDL/Tutorial.pm -> blib/libdoc/SDL::Tutorial.3
>> Manifying blib/lib/SDL/TTFont.pm -> blib/libdoc/SDL::TTFont.3
>> Manifying blib/lib/SDL/Cursor.pm -> blib/libdoc/SDL::Cursor.3
>> Manifying blib/lib/SDL/Tutorial/Drawing.pm ->
>> blib/libdoc/SDL::Tutorial::Drawing.3
>> Manifying blib/lib/SDL.pm -> blib/libdoc/SDL.3
>> Manifying blib/lib/SDL/Color.pm -> blib/libdoc/SDL::Color.3
>> Manifying blib/lib/SDL/Palette.pm -> blib/libdoc/SDL::Palette.3
>> Manifying blib/lib/SDL/Sound.pm -> blib/libdoc/SDL::Sound.3
>> Manifying blib/lib/SDL/SFont.pm -> blib/libdoc/SDL::SFont.3
>> Manifying blib/lib/SDL/Tool/Graphic.pm -> blib/libdoc/SDL::Tool::Graphic.3
>> Manifying blib/lib/SDL/Tool/Font.pm -> blib/libdoc/SDL::Tool::Font.3
>> Manifying blib/lib/SDL/OpenGL.pm -> blib/libdoc/SDL::OpenGL.3
>> Manifying blib/lib/SDL/Video.pm -> blib/libdoc/SDL::Video.3
>> Manifying blib/lib/SDL/App.pm -> blib/libdoc/SDL::App.3
>>>>> Source compiled.
>>>>> Test phase [not enabled]: dev-perl/sdl-perl-2.1.3-r3
>>
>>>>> Install sdl-perl-2.1.3-r3
>> into /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/ category dev-perl
>> WARNING: Can't figure out install path for types: arch lib
>> Files will not be installed.
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Tutorial.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::SFont.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Surface.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Tutorial::Animation.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Palette.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Event.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Color.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::OpenGL.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Timer.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Tool::Graphic.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Cursor.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::MPEG.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Music.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Tool::Font.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Cdrom.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Tutorial::Drawing.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::App.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Tutorial::Images.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Rect.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Mixer.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Video.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Font.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Sound.3
>> Installing
>> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::TTFont.3
>> * Cleaning out stray man files
>> *
>> * ERROR: dev-perl/sdl-perl-2.1.3-r3 failed.
>> * Call stack:
>> * ebuild.sh, line 49: Called src_install
>> * environment, line 2324: Called die
>> * The specific snippet of code:
>> * die "failed to install properly";
>> * The die message:
>> * failed to install properly
>> *
>> * If you need support, post the topmost build error, and the call stack if
>> relevant.
>> * A complete build log is located
>> at '/var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/temp/build.log'.
>> * The ebuild environment file is located
>> at '/var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/temp/environment'.
>> *
>>
>> * Messages for package dev-perl/sdl-perl-2.1.3-r3:
>>
>> *
>> * ERROR: dev-perl/sdl-perl-2.1.3-r3 failed.
>> * Call stack:
>> * ebuild.sh, line 49: Called src_install
>> * environment, line 2324: Called die
>> * The specific snippet of code:
>> * die "failed to install properly";
>> * The die message:
>> * failed to install properly
>> *
>> * If you need support, post the topmost build error, and the call stack if
>> relevant.
>> * A complete build log is located
>> at '/var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/temp/build.log'.
>> * The ebuild environment file is located
>> at '/var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/temp/environment'.
>> *
>> #
>>
>>
>
> Can you give us the output of emerge --debug sdl-perl ? Can you verify
> that you can successfully install other perl apps like perl-tk or
> something else in the dev-perl category?
>
.....sorry about the mulitple "Can you give up the output of....", I
unintentionally copied that text around in random places.
