Dale wrote:
> Steven Lembark wrote:
>>
>> > Well, this one takes longer. Just the foldingathome takes about 20
>> > seconds or more to shutdown. It can take over 60 seconds at times.
>> > That service for some reason has to completely shutdown before the
>> > others start to shutdown. The others will shutdown in parallel like I
>> > have set up. Then there is all the other services that have to stop.
>> > Quite literally, I only had seconds to shutdown since the P/S was
>> > stinking like a skunk. I just needed to umnount the file systems and
>> > power off as fast as possible. I didn't want to just pull the plug but
>> > I needed a shutdown that fast.
>>
>> Hackint the shutdowns to background the shutdown
>> op and return is usually pretty simple -- don't know
>> why more app's don't do that by default.
>>
>> 'halt' will get you down with little typing if you
>> want to bypass the init scripts; so will "kill -TERM 1".
>> Add a 'sync' before either of them and you'll probably
>> be able to come up with minimal trouble.
>>
>
> What's the difference between halt command and shutdown? I thought they
> were basically the same thing.
>
> Also, in case you missed it. I have a service, foldingathome, that
> takes a while to stop and no other service can be stopped in parallel
> with this one. That is one of my key sticking points with the
> shutdown. Most of the others are pretty fast. I just needed the
> quickest *clean* shutdown I could get.
> Thanks
I have four FAH jobs running on my compute server. I
can "kill -TERM fah6" in about 0.70 sec here, they
start up again and just keep going. FAH is pretty
robust when it comes to restarts; again if you crash
the proc's then it won't be any worse than the outcome
of loosing power: FAH will have to pick up its pieces
and keep going. At least with "halt -f" you'll get
the kernel space cleaned up.
Halt will stop the O/S (see note from manpage, below).
In this case a 'halt -f' would get the system down
about as quickly as possible without just hitting
the reset button.
NOTES
Under older sysvinit releases , reboot and halt should never be
called
directly. From release 2.74 on halt and reboot invoke
shutdown(8) if
the system is not in runlevel 0 or 6. This means that if halt or
reboot
cannot find out the current runlevel (for example, when
/var/run/utmp
hasn't been initialized correctly) shutdown will be called, which
might
not be what you want. Use the -f flag if you want to do a hard
halt or
reboot.
--
Steven Lembark 85-09 90th St.
Workhorse Computing Woodhaven, NY, 11421
[EMAIL PROTECTED] +1 888 359 3508
--
gentoo-user@lists.gentoo.org mailing list
