This One Time, at Band Camp, Sergey Kobzar <[EMAIL PROTECTED]> said, On Fri, Mar 14, 2008 at 01:54:48PM +0200: > Hi Wael,
> Thanks for help. > According to http://gentoo-wiki.com/HOWTO_fbsplash: > uvesafb - a newer (>=2.6.23) generic, _non-accelerated_ driver that > supports additional features such as custom resolutions. Unlike other > drivers, it requires a userspace daemon called v86d to run (provided > in the sys-apps/v86d package) > intelfb - an _accelerated_ driver for Intel chipsets > That's why I selected intelfb. Any chance to get it working or it's > more easy to forget about it? I don't know about this, I've never used intelfb so I can't help with that, but an advise though, if your intention is to use for example mplayer on Console then I think it's worth working on it, but if your intention is to use just for the splash, uvesafb will be sufficient... > Friday, March 14, 2008, 2:49:12 AM, you wrote: > > This One Time, at Band Camp, Sergey Kobzar <[EMAIL PROTECTED]> > > said, On Thu, Mar 13, 2008 at 11:34:10PM +0200: > >> Hi > >> Linux 2.6.24-gentoo-r3 i686 > >> I have Asus U5F laptop: > >> # lspci > >> 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and > >> 945GT Express Memory Controller Hub (rev 03) > >> 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, > >> 943/940GML Express Integrated Graphics Controller (rev 03) > >> 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS, 943/940GML > >> Express Integrated Graphics Controller (rev 03) > >> 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High > >> Definition Audio Controller (rev 02) > >> 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express > >> Port 1 (rev 02) > >> 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express > >> Port 2 (rev 02) > >> 00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express > >> Port 3 (rev 02) > >> 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI > >> Controller #1 (rev 02) > >> 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI > >> Controller #2 (rev 02) > >> 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI > >> Controller #3 (rev 02) > >> 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI > >> Controller #4 (rev 02) > >> 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI > >> Controller (rev 02) > >> 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) > >> 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface > >> Bridge (rev 02) > >> 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA > >> IDE Controller (rev 02) > >> 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B > >> PCI Express Gigabit Ethernet controller (rev 01) > >> 02:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network > >> Connection (rev 02) > >> 08:03.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller > >> 08:03.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host > >> Adapter (rev 19) > >> 08:03.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host > >> Adapter (rev 0a) > >> 08:03.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05) > >> and can't get working intelfb module on it. Kernel config: > >> # cat /usr/src/linux/.config | grep FB | grep -v '#' > >> CONFIG_FB=y > >> CONFIG_FB_DDC=y > >> CONFIG_FB_CFB_FILLRECT=y > >> CONFIG_FB_CFB_COPYAREA=y > >> CONFIG_FB_CFB_IMAGEBLIT=y > >> CONFIG_FB_DEFERRED_IO=y > >> CONFIG_FB_MODE_HELPERS=y > >> CONFIG_FB_INTEL=y > >> CONFIG_FB_INTEL_I2C=y > >> # dmesg | grep intel > >> intelfb: Framebuffer driver for Intel(R) > >> 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets > >> intelfb: Version 0.9.4 > >> intelfb: 00:02.0: Intel(R) 945GM, aperture size 256MB, stolen memory 7932kB > >> intelfb: Non-CRT device is enabled ( LVDS port ). Disabling mode > >> switching. > >> intelfb: Video mode must be programmed at boot time. > >> I tried these kernel kernel options: > >> kernel /boot/kernel-2.6.24-gentoo-r3-b2 root=/dev/sda5 video=intelfb > >> vga=0x318 > >> kernel /boot/kernel-2.6.24-gentoo-r3-b2 root=/dev/sda5 > >> video=intelfb:[EMAIL PROTECTED] > >> kernel /boot/kernel-2.6.24-gentoo-r3-b2 root=/dev/sda5 vga=792 > >> and in all cases I see blank screen or screen with many scrolling > >> white lines. > >> Any chance to get framebuffer working on my laptop? > > Don't use intelfb, just use the standard uvesafb. > > $ zgrep FB /proc/config.gz > > CONFIG_FB=y > > # CONFIG_FB_DDC is not set > > CONFIG_FB_CFB_FILLRECT=y > > CONFIG_FB_CFB_COPYAREA=y > > CONFIG_FB_CFB_IMAGEBLIT=y > > # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set > > # CONFIG_FB_SYS_FILLRECT is not set > > # CONFIG_FB_SYS_COPYAREA is not set > > # CONFIG_FB_SYS_IMAGEBLIT is not set > > # CONFIG_FB_SYS_FOPS is not set > > CONFIG_FB_DEFERRED_IO=y > > # CONFIG_FB_SVGALIB is not set > > # CONFIG_FB_MACMODES is not set > > # CONFIG_FB_BACKLIGHT is not set > > CONFIG_FB_MODE_HELPERS=y > > # CONFIG_FB_TILEBLITTING is not set > > # CONFIG_FB_CIRRUS is not set > > # CONFIG_FB_PM2 is not set > > # CONFIG_FB_CYBER2000 is not set > > # CONFIG_FB_ARC is not set > > # CONFIG_FB_ASILIANT is not set > > # CONFIG_FB_IMSTT is not set > > # CONFIG_FB_VGA16 is not set > > CONFIG_FB_UVESA=y > > # CONFIG_FB_VESA is not set > > # CONFIG_FB_EFI is not set > > # CONFIG_FB_HECUBA is not set > > # CONFIG_FB_HGA is not set > > # CONFIG_FB_S1D13XXX is not set > > # CONFIG_FB_NVIDIA is not set > > # CONFIG_FB_RIVA is not set > > # CONFIG_FB_I810 is not set > > # CONFIG_FB_LE80578 is not set > > # CONFIG_FB_INTEL is not set > > # CONFIG_FB_MATROX is not set > > # CONFIG_FB_RADEON is not set > > # CONFIG_FB_ATY128 is not set > > # CONFIG_FB_ATY is not set > > # CONFIG_FB_S3 is not set > > # CONFIG_FB_SAVAGE is not set > > # CONFIG_FB_SIS is not set > > # CONFIG_FB_NEOMAGIC is not set > > # CONFIG_FB_KYRO is not set > > # CONFIG_FB_3DFX is not set > > # CONFIG_FB_VOODOO1 is not set > > # CONFIG_FB_VT8623 is not set > > # CONFIG_FB_CYBLA is not set > > # CONFIG_FB_TRIDENT is not set > > # CONFIG_FB_ARK is not set > > # CONFIG_FB_PM3 is not set > > # CONFIG_FB_GEODE is not set > > # CONFIG_FB_VIRTUAL is not set > > CONFIG_FB_CON_DECOR=y > > Here's my menu.lst part: > > title=Gentoo Linux > > root (hd0,1) > > kernel (hd0,1)/gentoo/kernel dolvm crypt_root=/dev/sda4 > > lvm2root=/dev/mapper/root real_root=/dev/system/gentoo-root > > video=uvesafb:ywrap,mtrr:3,scroll:ywrap,1024x768-32 > > splash=silent,theme:KillBillTux-Grey fbcon=scrollback:128k console=tty1 > > resume=swap:/dev/system/suspend-swap quiet > > initrd (hd0,1)/gentoo/initramfs > > I have the same card and it works perfectly this way > > Good Luck! -- Wael Nasreddine http://wael.nasreddine.com PGP: 1024D/C8DD18A2 06F6 1622 4BC8 4CEB D724 DE12 5565 3945 C8DD 18A2 .: An infinite number of monkeys typing into GNU emacs, would never make a good program. (L. Torvalds 1995) :.
pgprT2RCqZLZG.pgp
Description: PGP signature
