____________________________________________________________________________________ > > > Get easy, one-click access to your favorites. > > > Make Yahoo! your homepage. > > > http://www.yahoo.com/r/hs > > > > > > do you have a space in between (hd1) and (hd0) in > > map (hd1) (hd0) > > ? > > space or no space makes no difference. > > The thing is, tab completion finds only hd0 which grub > doesn't seem to realize is the SECOND drive. Using hd1 > gives error 21: Selected disk does not exist. Although > it appears in device.map, dmesg, fdisk etc. > > Maybe it's a bug in grub.Gonna send a note to > [EMAIL PROTECTED] see what happens. >
I had something similar happen like this on a box I just recently built. I had two hard disks but the system could only see one. It turned out I had the jumpers on the hard drive set for cable select and was using the proper cable but it was not reading right. Once I set the hard drives jumpers in a master/slave configuration the computer could see both hard drives and everything worked fine. Have you messed with this stuff at all? Trying different disc plugged in using different cables into different points. I don't know if it will make a difference but if grub isn't seeing one of the drives I would suspect the controller. -- [EMAIL PROTECTED] mailing list
