Hi, Am Dienstag, 25. September 2007 23:24:27 schrieb Mark Knecht: > On 9/25/07, Michael Schreckenbauer <[EMAIL PROTECTED]> wrote: > > Hi Mark, > > > > Am Mittwoch, 19. September 2007 schrieb Mark Knecht: > > > Hi, > > > Message is to Randy and others that have been helping me with my > > > audio problems with xine. This evening I discovered the root cause of > > > the problem of no sound when playing DVDs in xine. Unfortunately I > > > don't have a good solution yet. Maybe someone knows how to fix this at > > > the command line? > > > OK, xine does produce sound, but this machine has multiple sound > > > cards and it's choosing the one that goes to the home theater system, > > > not the PC's sound card: > > > > maybe I missed that one in this thread, but did you look at xine's > > audio-configuration? > > Could you post the output of grep "audio" .xine/config here? > > > > Regards, > > Michael > > Hi Michael, > Thanks for taking a look. Let me know if you see anything or want more > info. > > Cheers, > Mark
afaik those are all default values, except audio.alsa_hw_mixer:0. I don't think, that's a problem. Does xine play every sound through the wrong device or only DVDs (5.1)? Maybe there's a stale asoundrc in your home, somehow redirecting "plug:surround51:0" to the second device? I'm out of ideas now, it seems :( Regards, Michael > dragonfly mark # cat .xine/config | grep audio > #gui.post_audio_plugin:goom > #gui.audio_mixer_method:Sound card > audio.alsa_hw_mixer:0 > # audio driver to use > #audio.driver:auto > #audio.a52.dynamic_range:0 > # downmix audio to 2 channel surround stereo > #audio.a52.surround_downmix:0 > #audio.a52.level:100 > #audio.device.alsa_default_device:default > #audio.device.alsa_front_device:plug:front:default > #audio.device.alsa_mixer_name:PCM > #audio.device.alsa_mmap_enable:0 > #audio.device.alsa_passthrough_device:iec958:AES0=0x6,AES1=0x82,AES2=0x0,AE >S3=0x2 #audio.device.alsa_surround40_device:plug:surround40:0 > #audio.device.alsa_surround51_device:plug:surround51:0 > #audio.output.speaker_arrangement:Stereo 2.0 > #audio.synchronization.passthrough_offset:0 > # play audio even on slow/fast speeds > #audio.synchronization.slow_fast_audio:0 > # method to sync audio and video > #audio.synchronization.av_sync_method:metronom feedback > #audio.synchronization.force_rate:0 > #audio.synchronization.resample_mode:auto > # startup audio volume > #audio.volume.mixer_volume:50 > #audio.volume.remember_volume:0 > # device used for CD audio > #media.audio_cd.device:/dev/cdrom > #media.audio_cd.drive_slowdown:4 > #media.audio_cd.use_cddb:1 > #media.audio_cd.cddb_cachedir:/home/mark/.xine/cddbcache > #media.audio_cd.cddb_port:8880 > #media.audio_cd.cddb_server:freedb.freedb.org > # number of audio buffers > #engine.buffers.audio_num_buffers:230 > # priority for dvaudio decoder > #engine.decoder_priorities.dvaudio:0 > # priority for ffmpegaudio decoder > #engine.decoder_priorities.ffmpegaudio:0 > dragonfly mark # > > > dragonfly mark # uname -a > Linux dragonfly 2.6.20-gentoo-r1 #4 SMP PREEMPT Tue May 15 06:22:55 > PDT 2007 i686 Intel(R) Pentium(R) 4 CPU 3.00GHz GenuineIntel GNU/Linux > dragonfly mark # > > dragonfly mark # cat /proc/asound/cards > 0 [ICH5 ]: ICH4 - Intel ICH5 > Intel ICH5 with ALC655 at 0xfa081000, irq 21 > 1 [default ]: USB-Audio - USB Audio CODEC > Burr-Brown from TI USB Audio CODEC > at usb-0000:00:1d.1-1, full s > dragonfly mark # > > dragonfly mark # cat /proc/asound/version > Advanced Linux Sound Architecture Driver Version 1.0.14rc1 (Tue Jan 09 > 09:56:17 2007 UTC). > dragonfly mark # -- [EMAIL PROTECTED] mailing list
