Am Mittwoch 15 August 2007 14:26:46 schrieben Sie: > Am Mittwoch 15 August 2007 13:53:39 schrieb Michael Gisbers: > > Am Mittwoch 15 August 2007 schrieb Florian Philipp: > > > Hi! > > > > > > I've bought a Merlin X870 UMTS ExpressCard. They even offer Linux > > > support and a howto but it doesn't work: > > > > > > http://www.novatelwireless.com/support/merlin-xu870-linux.html > > > > > > "1. > > > # Open an xterm window (window A) and log in as root: > > > > > > su root > > > tail –f /var/log/messages > > > > > > 2. > > > # Insert the XU870 ExpressCard modem into your notebook computer. > > > > > > Look for the port association and note the lower order port numbers > > > when device is inserted. The information will be used later in this > > > procedure. The following shows sample output: > > > > > > Aug 3 15:27:33 linux kernel: usb 5-1: configuration #1 chosen from 1 > > > choice Aug 3 15:27:33 linux kernel: airprime 5-1:1.0: airprime > > > converter detected Aug 3 15:27:33 linux kernel: usb 5-1: airprime > > > converter now attached to ttyUSB0 > > > Aug 3 15:27:33 linux kernel: airprime 5-1:1.1: airprime converter > > > detected Aug 3 15:27:33 linux kernel: usb 5-1: airprime converter now > > > attached to ttyUSB1 > > > > > > 3. > > > # Open another xterm window (window B) and log in as root: > > > > > > su root > > > cat /dev/ttyUSB0 > > > > > > There should be additional output displayed in xterm window A that was > > > opened in step 1." > > > > > > Step number two doesn't work, there is no output at all. What's going > > > on? What's this "airprime converter"? I didn't find it in the kernel or > > > via eix -Ss. > > > > > > dmesg gives me: > > > "[ 7104.176596] pccard: CardBus card inserted into slot 0" > > > > It seems to depend on kernel version. > > > > With 2.6.2[1|2] I'm using option.ko without any problems: > > > > Aug 15 13:48:25 mars option 3-1:1.0: GSM modem (1-port) converter > > detected Aug 15 13:48:25 mars usb 3-1: GSM modem (1-port) converter now > > attached to ttyUS > > B0 > > Aug 15 13:48:25 mars Device driver ttyUSB0 lacks bus and class support > > for being > > resumed. > > Aug 15 13:48:25 mars option 3-1:1.1: GSM modem (1-port) converter > > detected Aug 15 13:48:25 mars usb 3-1: GSM modem (1-port) converter now > > attached to ttyUS > > B1 > > Aug 15 13:48:25 mars Device driver ttyUSB1 lacks bus and class support > > for being resumed. > > > > I use umtsmon (http://umtsmon.sourceforge.net) which supports XU870 when > > starting with '--serial /dev/ttyUSB0'. > > I can't find option.ko. Where is it? > > Do you mean that I don't need these HSDPA-scripts they offer when I use > umtsmon? Okay, I've found option.ko and airprime.ko. tail -f /var/log/messages still doesn't output anything. Might that be a configuration issue (syslog-ng? kernel?)?
signature.asc
Description: This is a digitally signed message part.
