On Wed, 17 Jan 2007 18:57:54 +0100 "Huib van Wees" <[EMAIL PROTECTED]> wrote:
> Hi List, > > I don't know when this happend, I don't reboot my system very often. > Here is the issue. > > This Gentoo box has 5 ethernet interfaces. All together in bridge br0 > > But somehow the default gateway isn't set at boot time which is quiete > anoying, this worked before but I think the net startup script has > been updated and this is changed. > > Anyone any clues? > > This is how mijn /etc/conf.d/net looks like: > bridge_br0="eth0 eth1 eth2 eth3 eth4" > config_br0=( "172.30.0.4 broadcast 172.30.255.255 netmask > 255.255.0.0" ) gateway="br0/172.30.0.1" > from /etc/conf.d/net.example: #----------------------------------------------------------------------------- # Bridging (802.1d) # For bridging support emerge net-misc/bridge-utils # To add ports to bridge br0 #bridge_br0="eth0 eth1" # or dynamically add them when the interface comes up #bridge_add_eth0="br0" #bridge_add_eth1="br0" # You need to configure the ports to null values so dhcp does not get started #config_eth0=( "null" ) #config_eth1=( "null" ) # Finally give the bridge an address - dhcp or a static IP #config_br0=( "dhcp" ) # may not work when adding ports dynamically #config_br0=( "192.168.0.1/24" ) # If any of the ports require extra configuration - for example wireless or # ppp devices - we need to depend on them like so. #RC_NEED_br0="net.eth0 net.eth1" # Below is an example of configuring the bridge # Consult "man brctl" for more details #brctl_br0=( "setfd 0" "sethello 0" "stp off" ) #----------------------------------------------------------------------------- -- gentoo-user@gentoo.org mailing list
