On 24 July 2006 12:30, Nick Rout wrote: > The guy on the mythtv list thought his was OK too until someone else > spotted the error - I'm not saying you cannot read a log file, but y'know > it happens to the best of us :-(
Alright, here is my log: ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.7.0 (tagged release) loading ivtv: Linux version: 2.6.17-gentoo-r3 SMP preempt mod_unload PENTIUM4 4KSTACKS gcc-3.4 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. intel8x0_measure_ac97_clock: measured 50865 usecs intel8x0: clocking to 48000 ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based) ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 209 ivtv0: Unreasonably low latency timer, setting to 64 (was 32) tveeprom 1-0050: The eeprom says no radio is present, but the tuner type tveeprom 1-0050: indicates otherwise. I will assume that radio is present. tveeprom 1-0050: Hauppauge model 26039, rev C1A5, serial# 8499471 tveeprom 1-0050: tuner model is TCL MPE05-2 (idx 105, type 38) tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) tveeprom 1-0050: audio processor is CX25842 (idx 36) tveeprom 1-0050: decoder processor is CX25842 (idx 29) tveeprom 1-0050: has radio, has IR remote tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) tda9887 1-0043: chip found @ 0x86 (ivtv i2c driver #0) cx25840 1-0044: cx25842-23 found @ 0x88 (ivtv i2c driver #0) cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes) wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02050032 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) ivtv0: Create encoder radio stream tuner 1-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 ivtv: ==================== END INIT IVTV ==================== > > As far as i recall you have been trying so far with composite/line in. Is > it worth trying the tuner? Well, I am not interested in watching TV. Even if the tuner works that doesn't necessarily mean that the hardware dealing with composite and Line IN is working properly. I may give it a try later but I don't even have an arial because I never watch TV. ;-) > > What sort of input does your line-in have? Mine is two RCA plugs, but I > have heard of them having the 2.5mm stereo plugs too (like a headphone > socket on a walkman). If so, make sure the plug is the right one. The latter one - and yes, I think the plug is right. > > Not sure where else to go from here, except back to the vendor. My feeling meanwhile. :-( > > > -- > > Mark Twain: I rather decline two drinks than a German adjective. > > I love that quote! When I read it, I almost instantaneously fell in love with it. ;-) Uwe -- Mark Twain: I rather decline two drinks than a German adjective. http://www.SysEx.com.na -- gentoo-user@gentoo.org mailing list
