Alle 17:28, martedì 13 giugno 2006, Jacques Montier ha scritto: > Mauro Arnoldi a gentiment tapote: > > Alle 15:22, martedì 13 giugno 2006, Jacques Montier ha scritto: > >> Mauro Arnoldi a gentiment tapote: > >>> Alle 14:31, martedì 13 giugno 2006, Ptitjack ha scritto: > >>>> Mauro Arnoldi a gentiment tapote: > >>>>> Hello! > >>>>> > >>>>> I installed a new Gentoo system, but I find big problems with ati > >>>>> drivers and 3D acceleration. I have followed the wiki howto but now I > >>>>> receive this error message > >>>>> > >>>>> #fglrxinfo > >>>>> Xlib: extension "XFree86-DRI" missing on display ":0.0". > >>>>> display: :0.0 screen: 0 > >>>>> OpenGL vendor string: Mesa project: www.mesa3d.org > >>>>> OpenGL renderer string: Mesa GLX Indirect > >>>>> OpenGL version string: 1.2 (1.5 Mesa 6.5) > >>>>> > >>>>> I saw the Troubleshooting: > >>>>> If fglrxinfo says "mesa3d.org" instead of "ATI" after A SUCCESSFUL > >>>>> modprobe of fglrx, but nothing changes. > >>>>> I include my configuration, hoping that someone can help me out of > >>>>> this mess... > >>>>> > >>>>> kernel version: 2.6.16-gentoo-r9 > >>>>> in "Character Devices": > >>>>> /dev/agpgart (AGP Support) M > >>>>> ATI chipset support M > >>>> > >>>> Hi, > >>>> > >>>> I think you have to disable ATI chipset support in Character Devices > >>>> (/dev/agpgart must be enabled as module). > >>>> I Hope it will help. > >>> > >>> Nothing changed: > >> > >> After you have changed your kernel configuration, I suppose you > >> recompiled your kernel ? > >> Did you enable via chipset support in Character Devices ( then modprobe > >> via-agp) ? > >> After compiling ati-drivers, did you run > >> eselect opengl set ati ? > > > > eselect is ok: > > > > #eselect opengl list > > Available OpenGL implementations: > > [1] ati * > > [2] xorg-x11 > > > > Why do I have to compile via chipset support? I have and Ati Radeon X300 > > in my laptop.. > > because of my VIA KT133A chipset motherboard. > Without loading via-agp module, I don't have any 3D acceleration. > What gives lspci | grep AGP ?
I find nothing!! :-O But maybe the correct line is 00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 03) (prog-if 00 [Normal decode]) because a radeon X300 it's not an AGP card but a PCI Express... I enabled in my kernel the "Intel 440LX/BX/GX, I8xx and E7x05 chipset support", but still nothing at all... I always receive the error above... I'm getting crazy.. -- gentoo-user@gentoo.org mailing list
