On Sat, Mar 25, 2006 at 06:57:10PM -0800, maxim wexler wrote
> ----------------Sempron-2.6.12------------------------
>
> sarawak heathen # route -n
> Kernel IP routing table
> Destination Gateway Genmask Flags Metric Ref Use Iface
> 64.228.98.241 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0
> 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
> 127.0.0.0 127.0.0.1 255.0.0.0 UG 0 0 0 lo
> 0.0.0.0 64.228.98.241 0.0.0.0 UG 0 0 0 ppp0
Ouch; you're *NOT* going to connect the two machines while logged on
via dialup, at least not without some fancy "route" statements. If
anybody can give an example of how to do it, I'd appreciate seeing it.
> ------------K6-2.6.15----------------------
>
>
> lumberton ~ # route -n
> Kernel IP routing table
> Destination Gateway Genmask Flags Metric Ref Use Iface
> 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
> 127.0.0.0 127.0.0.1 255.0.0.0 UG 0 0 0 lo
>
Did you miss the last line when cutting+pasting or or was that really
all? Try "grep gateway /etc/conf.d/net" on your machines. Here's what I
get...
# For setting the default gateway
#gateway="eth0/192.168.0.1"
gateway="eth0/192.168.123.254"
First, make sure that you are *NOT* connected via dialup.
On the K6, insert into /etc/conf.d/net the line
gateway="eth0/192.168.0.2"
and execute /etc/init.d/net.eth0 restart
On the Sempron, insert into /etc/conf.d/net the line
gateway="eth0/192.168.0.3"
and execute /etc/init.d/net.eth0 restart
You should now be able to talk between the two machines... but dialup
won't work. You may connect, but not get anywhere. Here's what you
have to do on the Sempron...
- *BEFORE* dialing up "ifconfig eth0 down"; you can now dial up
- *AFTER* logging off dialup, "/etc/init.d/net.eth0 restart"; you can
now talk between the two computers
If someone has a magic configuration that allows eth0 and ppp0 to
co-exist, and function, simultaneously, please post it.
--
Walter Dnes <[EMAIL PROTECTED]> In linux /sbin/init is Job #1
My musings on technology and security at http://tech_sec.blog.ca
--
gentoo-user@gentoo.org mailing list
