Just a stupid question: Did you add =scrnsaverproto-1.2.2-r1 to
package.mask? Because the -r2 is stable and nothing should prevent it from
being merged...
I am running partly testing and the time xorg-proto was added I had to deal
with hard blocks which I circumvented by un-keywording (remove from
package.accept-keywords) and selectively masking.
2018-03-25 20:58 GMT+03:00 gevisz <gev...@gmail.com>:
> 2018-03-25 20:38 GMT+03:00 gevisz <gev...@gmail.com>:
> > 2018-03-25 15:50 GMT+03:00 Neil Bothwick <n...@digimed.co.uk>:
> >> On Sun, 25 Mar 2018 15:19:33 +0300, gevisz wrote:
> >>
> >>> It seems that newly introduced x11-base/xorg-proto-2018.4 package
> >>> blocks everything else. What to do?
> >>> Is there better option in this case than unmerging xorg-server?
> >>> Thank you.
> >>>
> >>> # emerge --update --deep --with-bdeps=y --newuse --backtrack=90 --ask
> world
> >>>
> >>> These are the packages that would be merged, in order:
> >>>
> >>> Calculating dependencies... done!
> >>> [ebuild U ] sys-apps/rename-1.3-r2 [1.3]
> >>> [ebuild U ] sys-devel/autoconf-archive-2017.09.28 [2017.03.21]
> >>> [ebuild U ] app-misc/pax-utils-1.2.3 [1.2.2-r2]
> >>> [ebuild U ] sys-apps/sandbox-2.13 [2.12]
> >>> [ebuild N ] x11-base/xorg-proto-2018.4
> > ...
> >>> [blocks B ] <x11-proto/scrnsaverproto-1.2.2-r2
> >>> ("<x11-proto/scrnsaverproto-1.2.2-r2" is blocking
> >>> x11-base/xorg-proto-2018.4)
> >>>
> >>> * Error: The above package list contains packages which cannot be
> >>> * installed at the same time on the same system.
> >>
> >> The only hard block here appears to be xscrnsaverproto, unmerge that and
> >> the rest should take care of themselves. I had all the soft blocks today
> >> but not that one, and everything worked fine.
> >
> > Unmerging the scrnsaverproto package did not changed the message from
> > portage. However, adding --exclude scrnsaverproto --exclude chromium
> > to the command above helped a bit. So, now, I have the following:
> >
> > # emerge --update --deep --with-bdeps=y --newuse --backtrack=100 --ask
> > world --exclude chromium
> >
> > These are the packages that would be merged, in order:
> >
> > Calculating dependencies... done!
> > [ebuild N ] x11-proto/scrnsaverproto-1.2.2-r1 USE="-doc"
> > ABI_X86="(64) -32 (-x32)"
> > [blocks B ] <x11-proto/scrnsaverproto-1.2.2-r2
> > ("<x11-proto/scrnsaverproto-1.2.2-r2" is blocking
> > x11-base/xorg-proto-2018.4)
> >
> > * Error: The above package list contains packages which cannot be
> > * installed at the same time on the same system.
> >
> > (x11-base/xorg-proto-2018.4:0/0::gentoo, installed) pulled in by
> > x11-base/xorg-proto required by
> > (x11-proto/renderproto-0.11.1-r2:0/0::gentoo, installed)
> > x11-base/xorg-proto required by
> > (x11-proto/xf86bigfontproto-1.2.0-r2:0/0::gentoo, installed)
> > x11-base/xorg-proto required by
> > (x11-proto/glproto-1.4.17-r2:0/0::gentoo, installed)
> > x11-base/xorg-proto required by
> > (x11-proto/fixesproto-5.0-r2:0/0::gentoo, installed)
> > x11-base/xorg-proto required by
> > (x11-proto/xproto-7.0.31-r1:0/0::gentoo, installed)
> > x11-base/xorg-proto required by
> > (x11-proto/dri2proto-2.8-r2:0/0::gentoo, installed)
> > x11-base/xorg-proto required by
> > (x11-proto/compositeproto-0.4.2-r2:0/0::gentoo, installed)
> > x11-base/xorg-proto required by
> > (x11-proto/randrproto-1.5.0-r1:0/0::gentoo, installed)
> > x11-base/xorg-proto required by
> > (x11-proto/inputproto-2.3.2-r1:0/0::gentoo, installed)
> > x11-base/xorg-proto required by
> > (x11-proto/resourceproto-1.2.0-r1:0/0::gentoo, installed)
> > x11-base/xorg-proto required by
> > (x11-proto/videoproto-2.3.3-r1:0/0::gentoo, installed)
> > x11-base/xorg-proto required by
> > (x11-proto/kbproto-1.0.7-r1:0/0::gentoo, installed)
> > x11-base/xorg-proto required by
> > (x11-proto/fontsproto-2.1.3-r1:0/0::gentoo, installed)
> > x11-base/xorg-proto required by
> > (x11-proto/xf86vidmodeproto-2.3.1-r2:0/0::gentoo, installed)
> > x11-base/xorg-proto required by
> > (x11-proto/trapproto-3.4.3-r1:0/0::gentoo, installed)
> > x11-base/xorg-proto required by
> > (x11-proto/xf86driproto-2.1.1-r2:0/0::gentoo, installed)
> > x11-base/xorg-proto required by
> > (x11-proto/damageproto-1.2.1-r2:0/0::gentoo, installed)
> > x11-base/xorg-proto required by
> > (x11-proto/recordproto-1.14.2-r2:0/0::gentoo, installed)
> > x11-base/xorg-proto required by
> > (x11-proto/xineramaproto-1.2.1-r2:0/0::gentoo, installed)
> > x11-base/xorg-proto required by
> > (x11-proto/presentproto-1.1-r1:0/0::gentoo, installed)
> > x11-base/xorg-proto required by
> > (x11-proto/xcmiscproto-1.2.2-r1:0/0::gentoo, installed)
> > x11-base/xorg-proto required by
> > (x11-proto/xf86dgaproto-2.1-r3:0/0::gentoo, installed)
> > x11-base/xorg-proto required by
> > (x11-proto/xextproto-7.3.0-r1:0/0::gentoo, installed)
> > x11-base/xorg-proto required by
> > (x11-proto/bigreqsproto-1.1.2-r1:0/0::gentoo, installed)
> > x11-base/xorg-proto required by
> > (x11-proto/dri3proto-1.0-r1:0/0::gentoo, installed)
> >
> > (x11-proto/scrnsaverproto-1.2.2-r1:0/0::gentoo, ebuild scheduled for
> > merge) pulled in by
> > >=x11-proto/scrnsaverproto-1.2.2-r1[abi_x86_32(-)?,abi_x86_
> 64(-)?,abi_x86_x32(-)?,abi_mips_n32(-)?,abi_mips_n64(-)?,
> abi_mips_o32(-)?,abi_ppc_32(-)?,abi_ppc_64(-)?,abi_s390_32(-
> )?,abi_s390_64(-)?]
> > (>=x11-proto/scrnsaverproto-1.2.2-r1[abi_x86_64(-)]) required by
> > (x11-libs/libXScrnSaver-1.2.2-r1:0/0::gentoo, installed)
> > >=x11-proto/scrnsaverproto-1.1 required by
> > (x11-base/xorg-server-1.19.5-r1:0/1.19.5::gentoo, installed)
> >
> > For more information about Blocked Packages, please refer to the
> following
> > section of the Gentoo Linux x86 Handbook (architecture is irrelevant):
> >
> > https://wiki.gentoo.org/wiki/Handbook:X86/Working/Portage#
> Blocked_packages
> >
> > # revdep-rebuild
> > * This is the new python coded version
> > * Please report any bugs found using it.
> > * The original revdep-rebuild script is installed as revdep-rebuild.sh
> > * Please file bugs at: https://bugs.gentoo.org/
> > * Collecting system binaries and libraries
> > * Checking dynamic linking consistency
> >
> > Your system is consistent
> >
> > # emerge --depclean --backtrack=120 --ask
> >
> > * Always study the list of packages to be cleaned for any obvious
> > * mistakes. Packages that are part of the world set will always
> > * be kept. They can be manually added to this set with
> > * `emerge --noreplace <atom>`. Packages that are listed in
> > * package.provided (see portage(5)) will be removed by
> > * depclean, even if they are part of the world set.
> > *
> > * As a safety measure, depclean will not remove any packages
> > * unless *all* required dependencies have been resolved. As a
> > * consequence of this, it often becomes necessary to run
> > * `emerge --update --newuse --deep @world` prior to depclean.
> >
> > Calculating dependencies... done!
> > * Dependencies could not be completely resolved due to
> > * the following required packages not being installed:
> > *
> > * >=x11-proto/scrnsaverproto-1.2.2-r1[abi_x86_64(-)] pulled in by:
> > * x11-libs/libXScrnSaver-1.2.2-r1
> > *
> > * Have you forgotten to do a complete update prior to depclean? The
> > * most comprehensive command for this purpose is as follows:
> > *
> > * emerge --update --newuse --deep --with-bdeps=y @world
> > *
> > * Note that the --with-bdeps=y option is not required in many
> > * situations. Refer to the emerge manual page (run `man emerge`)
> > * for more information about --with-bdeps.
> > *
> > * Also, note that it may be necessary to manually uninstall
> > * packages that no longer exist in the portage tree, since it may
> > * not be possible to satisfy their dependencies.
> >
> > I don't think that old chromium package is a culprit here but will try
> > to unmerge it as well.
>
> After unmerging chromium and all its dependences I still have:
>
> # emerge --update --deep --with-bdeps=y --newuse --backtrack=120 --ask
> world
>
> These are the packages that would be merged, in order:
>
> Calculating dependencies... done!
> [ebuild N ] x11-proto/scrnsaverproto-1.2.2-r1 USE="-doc"
> ABI_X86="(64) -32 (-x32)"
> [blocks B ] <x11-proto/scrnsaverproto-1.2.2-r2
> ("<x11-proto/scrnsaverproto-1.2.2-r2" is blocking
> x11-base/xorg-proto-2018.4)
>
> * Error: The above package list contains packages which cannot be
> * installed at the same time on the same system.
>
> (x11-proto/scrnsaverproto-1.2.2-r1:0/0::gentoo, ebuild scheduled for
> merge) pulled in by
> >=x11-proto/scrnsaverproto-1.1 required by
> (x11-base/xorg-server-1.19.5-r1:0/1.19.5::gentoo, installed)
>
> (x11-base/xorg-proto-2018.4:0/0::gentoo, installed) pulled in by
> x11-base/xorg-proto required by
> (x11-proto/compositeproto-0.4.2-r2:0/0::gentoo, installed)
> x11-base/xorg-proto required by
> (x11-proto/xineramaproto-1.2.1-r2:0/0::gentoo, installed)
> x11-base/xorg-proto required by
> (x11-proto/recordproto-1.14.2-r2:0/0::gentoo, installed)
> x11-base/xorg-proto required by
> (x11-proto/damageproto-1.2.1-r2:0/0::gentoo, installed)
> x11-base/xorg-proto required by
> (x11-proto/renderproto-0.11.1-r2:0/0::gentoo, installed)
> x11-base/xorg-proto required by
> (x11-proto/fontsproto-2.1.3-r1:0/0::gentoo, installed)
> x11-base/xorg-proto required by
> (x11-proto/presentproto-1.1-r1:0/0::gentoo, installed)
> x11-base/xorg-proto required by
> (x11-proto/xproto-7.0.31-r1:0/0::gentoo, installed)
> x11-base/xorg-proto required by
> (x11-proto/xf86vidmodeproto-2.3.1-r2:0/0::gentoo, installed)
> x11-base/xorg-proto required by
> (x11-proto/xf86dgaproto-2.1-r3:0/0::gentoo, installed)
> x11-base/xorg-proto required by
> (x11-proto/resourceproto-1.2.0-r1:0/0::gentoo, installed)
> x11-base/xorg-proto required by
> (x11-proto/trapproto-3.4.3-r1:0/0::gentoo, installed)
> x11-base/xorg-proto required by
> (x11-proto/kbproto-1.0.7-r1:0/0::gentoo, installed)
> x11-base/xorg-proto required by
> (x11-proto/xcmiscproto-1.2.2-r1:0/0::gentoo, installed)
> x11-base/xorg-proto required by
> (x11-proto/bigreqsproto-1.1.2-r1:0/0::gentoo, installed)
> x11-base/xorg-proto required by
> (x11-proto/fixesproto-5.0-r2:0/0::gentoo, installed)
> x11-base/xorg-proto required by
> (x11-proto/randrproto-1.5.0-r1:0/0::gentoo, installed)
> x11-base/xorg-proto required by
> (x11-proto/xextproto-7.3.0-r1:0/0::gentoo, installed)
> x11-base/xorg-proto required by
> (x11-proto/dri2proto-2.8-r2:0/0::gentoo, installed)
> x11-base/xorg-proto required by
> (x11-proto/dri3proto-1.0-r1:0/0::gentoo, installed)
> x11-base/xorg-proto required by
> (x11-proto/xf86driproto-2.1.1-r2:0/0::gentoo, installed)
> x11-base/xorg-proto required by
> (x11-proto/inputproto-2.3.2-r1:0/0::gentoo, installed)
> x11-base/xorg-proto required by
> (x11-proto/glproto-1.4.17-r2:0/0::gentoo, installed)
> x11-base/xorg-proto required by
> (x11-proto/xf86bigfontproto-1.2.0-r2:0/0::gentoo, installed)
> x11-base/xorg-proto required by
> (x11-proto/videoproto-2.3.3-r1:0/0::gentoo, installed)
>
>
> For more information about Blocked Packages, please refer to the following
> section of the Gentoo Linux x86 Handbook (architecture is irrelevant):
>
> https://wiki.gentoo.org/wiki/Handbook:X86/Working/Portage#Blocked_packages
>
>
> > Any more ideas?
>
>
