Well, check if you have CONFIG_FB_EFI enabled in your config.
> H30/01/26 0:28、Dan Johansson <d...@dmj.nu>のメール:
>
> On 25.01.2018 16:24, Mick wrote:
>> On Thursday, 25 January 2018 13:18:13 GMT Dan Johansson wrote:
>>> Thanks for the advice, now grub starts and I get the menu (now I just
>>> have to figure out why the kernel hangs after being loaded).
>>
>> Glad you got it loading.
>>
>> Check at what stage the kernel oops - this would point at what in the kernel
>> configuration has gone awry. You must build the chipset and filesystem
>> drivers in the kernel (not as loadable modules), which may even drop you in
>> a
>> command prompt to troubleshoot from there.
>
> The kernel did not oops, there were just the messages
> Booting 'Gentoo GNU/Linux'
> Loading Linux x86_64-4.9.76-gentoo-r1
> and here it was just hanging.
>
> I normally do not like to have an initramfs but to com further I
> installed genkernel and let it build the kernel.
> The genkernel generated kernel does boot and everything, except on thing
> (at the moment), works - I can ssh into the box and continue configuration.
>
> The one thing that is not working is that I do not see ANY boot-messages
> on the console (it just says Loading Linux and Loading initial ramdisk
> ...), and I do not get a login-prompt and can not switch VT.
>
> But as I said, I can login with ssh and can now continue with the setup,
> the "Console" has to wait.
>
> KR
>
> --
> Dan Johansson
> ***************************************************
> This message is printed on 100% recycled electrons!
> ***************************************************
>
