On 02/17/2017 02:31 PM, Fernando Rodriguez wrote: > On 02/12/2017 12:59 PM, the...@sys-concept.com wrote: >> On 02/12/2017 04:26 AM, Adam Carter wrote: >>> On Sun, Feb 12, 2017 at 7:07 PM, <the...@sys-concept.com >>> <mailto:the...@sys-concept.com>> wrote: >>> >>> On 02/12/2017 01:01 AM, the...@sys-concept.com >>> <mailto:the...@sys-concept.com> wrote: >>> > My local network is 10.0.0.1 - >>> > >>> > I have an external device that is pre-set from factory to >>> 192.168.1.100 and I need to access to it via browser to change its network >>> setting. >>> > So I do: >>> > ifconfig net0:1 192.168.1.1 up >>> > >>> > nmap -sn 192.168.1.1/24 <http://192.168.1.1/24> >>> > >>> > Starting Nmap 6.47 ( http://nmap.org ) at 2017-02-12 00:54 MST >>> > Nmap scan report for 192.168.1.100 >>> > Host is up (0.00015s latency). >>> > MAC Address: 00:09:45:41:73:D1 (Palmmicro Communications) >>> > Nmap scan report for 192.168.1.1 >>> > Host is up. >>> > Nmap done: 256 IP addresses (2 hosts up) scanned in 3.78 seconds >>> > >>> > The device is showing up but I can not ping it, 100% packet loss. >>> >>> ifconfig is showing: >>> [snip] > Try 12345678 and read the manual [1] (I think this is it). > Try the phone keypad configuration method to set the ip. > > [1] > http://www.palmmicro.com/pa1688/download/us_pdf/PA168VSIPFXSGWUserguideEng.pdf
The access was: user: root password: test But this device is poorly constructed. I was not able to register it with asterisk. -- Thelma
