I have started noticing the following messages in the dmesg output (and
in the log-files) on my Gentoo rig:
[46545.779803] [Hardware Error]: Corrected error, no action required.
[46545.779984] [Hardware Error]: CPU:3 (15:2:0)
MC2_STATUS[Over|CE|MiscV|-|AddrV|-|-|CECC]: 0xdc2540f000040136
[46545.780434] [Hardware Error]: MC2 Error Address: 0x00000002cc215138
[46545.780605] [Hardware Error]: MC2 Error: Fill ECC error on data
fills.
[46545.783764] [Hardware Error]: cache level: L2, tx: DATA, mem-tx: DRD
[46545.784088] mce: [Hardware Error]: Machine check events logged
[46545.791786] [Hardware Error]: Corrected error, no action required.
[46545.791958] [Hardware Error]: CPU:2 (15:2:0)
MC2_STATUS[Over|CE|MiscV|-|AddrV|-|-|CECC]: 0xdc25405000040136
[46545.792382] [Hardware Error]: MC2 Error Address: 0x00000002cc2158b8
[46545.792579] [Hardware Error]: MC2 Error: Fill ECC error on data
fills.
[46545.792791] [Hardware Error]: cache level: L2, tx: DATA, mem-tx: DRD
[46545.793088] mce: [Hardware Error]: Machine check events logged
I have been running memtest for some time (~100h) and have not gotten
any error message - so I am suspecting that this is a CPU problem. Am I
correct?
If it was just these error-messages I would not be that worried, but I
have started to get a lot of "hangers" on this rig when compiling larger
packages. Could there be a relation to the error-messages?
KR,
--
Dan Johansson, <http://www.dmj.nu>
***************************************************
This message is printed on 100% recycled electrons!
***************************************************
