On Tue, Aug 26, 2014 at 11:29 PM, siefke_lis...@web.de <siefke_lis...@web.de> wrote: > Hello, > > i has problems with an UMTS Stick and Printer on USB. Nothing want work. > The printer take the job and nothing more. It works ever good and in > kernel i has nothing changed. But my printer not speak with me. :) > > gentoomobile log # tail -f /var/log/messages > Aug 26 22:22:47 gentoomobile syslog-ng[2931]: syslog-ng starting up; > version='3.4.8' > Aug 26 22:22:57 gentoomobile kernel: usb 3-1: new full-speed USB device > number 3 using uhci_hcd > Aug 26 22:22:57 gentoomobile kernel: usb 3-1: New USB device found, > idVendor=04f9, idProduct=01eb > Aug 26 22:22:57 gentoomobile kernel: usb 3-1: New USB device strings: Mfr=0, > Product=0, SerialNumber=3 > Aug 26 22:22:57 gentoomobile kernel: usb 3-1: SerialNumber: 000M9N691511 > Aug 26 22:22:57 gentoomobile kernel: usblp 3-1:1.0: usblp0: USB Bidirectional > printer dev 3 if 0 alt 0 proto 2 vid 0x04F9 pid 0x01EB > Aug 26 22:22:57 gentoomobile mtp-probe: checking bus 3, device 3: > "/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1" > Aug 26 22:22:57 gentoomobile mtp-probe: bus: 3, device: 3 was not an MTP > device > > gentoomobile log # tail -f /var/log/cups/error.log > W [26/Aug/2014:22:20:18 +0200] CreateProfile failed: > org.freedesktop.DBus.Error.ServiceUnknown:The name > org.freedesktop.ColorManager was not provided by any .service files > W [26/Aug/2014:22:20:18 +0200] CreateDevice failed: > org.freedesktop.DBus.Error.ServiceUnknown:The name > org.freedesktop.ColorManager was not provided by any .service files > > Same with UMTS Stick. I take in USB say networkmanager should call but > nothing happen. A short try only for a moment very short moment thats > all. > > Is there something changed in USB ?? I has on all notebooks same config > but the same happen. On all maschine is this happen. > > Regards > Silvio >
See if this helps. https://forums.gentoo.org/viewtopic-p-7536492.html have you made sure that usb printer support is disabled in kernel if the usb use flag is enabled for cups or vice versa (if usb printer support is in the kernel, the usb use flag for cups must be disabled, if no usb printer support is in the kernel, the usb use flag for cups must be enabled). hat seems to have done it -- dueling USB drivers, I suppose. Anyway, I can print again, which makes me much happier. Thanks for the help!
