On Fri, Feb 22, 2013 at 12:14 AM, Joseph <syscon...@gmail.com> wrote: > I just upgraded system including kernel to 3.5.7 because of udev-197 > Now I have a blank screen, not even console login (I can only access is via > ssh) > Here is Xorg.0.log > [ 55.449] (II) NVIDIA(0): Creating default Display subsection in Screen > section > "Default Screen Section" for depth/fbbpp 24/32 > [ 55.449] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32 > [ 55.449] (==) NVIDIA(0): RGB weight 888 > [ 55.449] (==) NVIDIA(0): Default visual is TrueColor > [ 55.449] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) > [ 55.449] (**) NVIDIA(0): Enabling 2D acceleration > [ 55.449] (EE) NVIDIA(0): Failed to initialize the GLX module; please > check in your X > [ 55.449] (EE) NVIDIA(0): log file that the GLX module has been > loaded in your X > [ 55.449] (EE) NVIDIA(0): server, and that the module is the NVIDIA > GLX module. If > [ 55.449] (EE) NVIDIA(0): you continue to encounter problems, Please > try > [ 55.449] (EE) NVIDIA(0): reinstalling the NVIDIA driver. > [ 67.826] (II) NVIDIA(GPU-0): Display (BenQ V2400W (DFP-1)) does not > support NVIDIA 3D > [ 67.826] (II) NVIDIA(GPU-0): Vision stereo. > [ 67.827] (II) NVIDIA(0): NVIDIA GPU GeForce GTS 450 (GF116) at PCI:1:0:0 > (GPU-0) > [ 67.827] (--) NVIDIA(0): Memory: 1048576 kBytes > [ 67.827] (--) NVIDIA(0): VideoBIOS: 70.26.29.00.00 > [ 67.827] (II) NVIDIA(0): Detected PCI Express Link width: 16X > [ 67.827] (--) NVIDIA(0): Interlaced video modes are supported on this > GPU > [ 70.833] (--) NVIDIA(0): Valid display device(s) on GeForce GTS 450 at > PCI:1:0:0 > [ 70.833] (--) NVIDIA(0): CRT-0 > [ 70.833] (--) NVIDIA(0): CRT-1 > [ 70.833] (--) NVIDIA(0): DFP-0 > [ 70.833] (--) NVIDIA(0): BenQ V2400W (DFP-1) (connected) > [ 70.833] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock > [ 70.833] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock > [ 70.833] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock > [ 70.833] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS > [ 70.833] (--) NVIDIA(0): BenQ V2400W (DFP-1): 165.0 MHz maximum pixel > clock > [ 70.833] (--) NVIDIA(0): BenQ V2400W (DFP-1): Internal Single Link TMDS > [ 70.833] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the > EDID for display > [ 70.833] (**) NVIDIA(0): device BenQ V2400W (DFP-1) (Using EDID > frequencies has > [ 70.833] (**) NVIDIA(0): been enabled on all display devices.) > [ 70.834] (WW) NVIDIA(GPU-0): The EDID for BenQ V2400W (DFP-1) > contradicts itself: mode > [ 70.834] (WW) NVIDIA(GPU-0): "720x480" is specified in the EDID; > however, the EDID's > [ 70.834] (WW) NVIDIA(GPU-0): valid HorizSync range (31.000-94.000 > kHz) would exclude > [ 70.834] (WW) NVIDIA(GPU-0): this mode's HorizSync (15.7 kHz); > ignoring HorizSync check > [ 70.834] (WW) NVIDIA(GPU-0): for mode "720x480". > [ 70.835] (==) NVIDIA(0): > [ 70.835] (==) NVIDIA(0): No modes were requested; the default mode > "nvidia-auto-select" > [ 70.835] (==) NVIDIA(0): will be used as the requested mode. > [ 70.835] (==) NVIDIA(0): > [ 70.835] (II) NVIDIA(0): Validated MetaModes: > [ 70.835] (II) NVIDIA(0): "DFP-1:nvidia-auto-select" > [ 70.835] (II) NVIDIA(0): Virtual screen size determined to be 1920 x > 1200 > [ 70.863] (--) NVIDIA(0): DPI set to (93, 95); computed from "UseEdidDpi" > X config > [ 70.863] (--) NVIDIA(0): option > [ 70.863] (--) Depth 24 pixmap format is 32 bpp > [ 70.863] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect > memory > [ 70.863] (II) NVIDIA: access. > [ 70.867] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event > daemon; the daemon > [ 70.867] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" > X > [ 70.867] (II) NVIDIA(0): configuration option may not be set > correctly. When the > [ 70.867] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA > X driver will > [ 70.867] (II) NVIDIA(0): try to use it to receive ACPI event > notifications. For > [ 70.867] (II) NVIDIA(0): details, please see the "ConnectToAcpid" > and > [ 70.867] (II) NVIDIA(0): "AcpidSocketPath" X configuration options > in Appendix B: X > [ 70.867] (II) NVIDIA(0): Config Options in the README. > [ 73.872] (II) NVIDIA(0): Setting mode "DFP-1:nvidia-auto-select" > [ 80.897] (EE) > [ 80.897] (EE) Backtrace: > [ 80.898] (EE) 0: /usr/bin/X (xorg_backtrace+0x36) [0x5979d6] > [ 80.898] (EE) 1: /usr/bin/X (0x400000+0x19b8c9) [0x59b8c9] > [ 80.898] (EE) 2: /lib64/libpthread.so.0 (0x7fcdd1510000+0x10810) > [0x7fcdd1520810] > [ 80.898] (EE) 3: /lib64/libc.so.6 (0x7fcdd0170000+0x136284) > [0x7fcdd02a6284] > [ 80.898] (EE) 4: /usr/lib64/xorg/modules/drivers/nvidia_drv.so > (0x7fcdce668000+0x116fd3) [0x7fcdce77efd3] > [ 80.898] (EE) 5: /usr/lib64/xorg/modules/drivers/nvidia_drv.so > (0x7fcdce668000+0x1172ed) [0x7fcdce77f2ed] > [ 80.898] (EE) 6: /usr/lib64/xorg/modules/drivers/nvidia_drv.so > (0x7fcdce668000+0xab654) [0x7fcdce713654] > [ 80.898] (EE) 7: /usr/lib64/xorg/modules/drivers/nvidia_drv.so > (0x7fcdce668000+0xe64e1) [0x7fcdce74e4e1] > [ 80.898] (EE) 8: /usr/lib64/xorg/modules/drivers/nvidia_drv.so > (0x7fcdce668000+0xb87ed) [0x7fcdce7207ed] > [ 80.898] (EE) 9: /usr/lib64/xorg/modules/drivers/nvidia_drv.so > (0x7fcdce668000+0x55a3d2) [0x7fcdcebc23d2] > [ 80.898] (EE) 10: /usr/bin/X (AddScreen+0x88) [0x439928] > [ 80.898] (EE) 11: /usr/bin/X (InitOutput+0x3fc) [0x47d09c] > [ 80.898] (EE) 12: /usr/bin/X (0x400000+0x280e3) [0x4280e3] > [ 80.898] (EE) 13: /lib64/libc.so.6 (__libc_start_main+0xec) > [0x7fcdd01924cc] > [ 80.898] (EE) 14: /usr/bin/X (0x400000+0x27e09) [0x427e09] > [ 80.898] (EE) > [ 80.898] (EE) Segmentation fault at address 0x7fcdd219fff0 > [ 80.898] > Fatal server error: > [ 80.898] Caught signal 11 (Segmentation fault). Server aborting > [ 80.898] > [ 80.898] (EE) > Please consult the The X.Org Foundation support > at http://wiki.x.org > for help. > [ 80.898] (EE) Please also check the log file at "/var/log/Xorg.0.log" > for additional information. > [ 80.898] (EE) > [ 80.900] Server terminated with error (1). Closing log file. > > cat /etc/X11/xorg.conf > # uncomment when the card gets IN > > Section "Device" > Identifier "Nvidia card" > Driver "nvidia" > EndSection > > eselect opengl list > Available OpenGL implementations: > [1] nvidia > [2] xorg-x11 *
If you are using the nvidia driver in your xorg.conf, shouldn't you have the NVidia OpenGL implementation? Regards. -- Canek Peláez Valdés Posgrado en Ciencia e Ingeniería de la Computación Universidad Nacional Autónoma de México
