Thx a lot Paul, this morning i noticed there was some kind of issue on my old initrd which works fine for 2.6 kernels, so created a new initrd which works fine and let me to boot into GNU/Gentoo Linux with same 3.5 bzImage.
Gonna check if the issue came from mdadm, thx :) 2012/10/26 Paul Hartman <paul.hartman+gen...@gmail.com> > On Fri, Oct 26, 2012 at 3:36 AM, Pau Peris <sibok1...@gmail.com> wrote: > > Hi, > > > > > > i'm running GNU/Gentoo Linux with a custom compiled kernel and i've just > > migrated from a 2.6 kernel to a 3.5. > > > > > > As my HD's are on raid 0 mode i use a custom initrd file in order to be > able > > to boot. While kernel 2.6 is able to boot without problems the new 3.5 > > compiled kernel fails to boot complaining about "no block devices found". > > After taking a look at initrd.cpio contained scripts i can see the > failure > > message is given by mdadm tool. > > > > > > Does anyone has a clue about that? Thansk in advanced. :) > > There is a bug with certain versions of mdadm failing to assemble > arrays, maybe you using one of the affected versions. > see https://bugs.gentoo.org/show_bug.cgi?id=416081 > > -- Pau Peris Rodriguez http://www.pauperis.com Aquest correu electrònic conté informació de caràcter confidencial dirigida exclusivament al seu/s destinatari/s tant mateix va dirigit exclusivament als seu/s destinatari/s primari/s present/s. Així, queda prohibida la seva divulgació, copia o distribució a tercers sense prèvia autorització escrita per part de Pau Peris Rodriguez. En cas d'haver rebut aquesta informació per error, es demana que es notifiqui immediatament d'aquesta circumstancia mitjançant la direcció electrònica de la persona del emissor.
