I would contact sangoma or file a bug on the freeswitch gira.
Tamer Higazi <th9...@googlemail.com> wrote:
> Hi Hinnerk!
> I did what you say, now the magic issue comes, the kernel drivers ARE
> BUILT for this kernel, here the modinfo output:
>
> tamer@office ~ $ sudo modinfo
> /lib/modules/3.3.8-gentoo/kernel/drivers/net/wan/wanpipe.ko
> +filename: /lib/modules/3.3.8-gentoo/kernel/drivers/net/wan/wanpipe.ko
> license: GPL
> description: Sangoma WANPIPE: WAN Multi-Protocol Driver
> author: Nenad Corbic <ncor...@sangoma.com>
> depends: sdladrv,wanrouter
> vermagic: 3.3.8-gentoo SMP mod_unload modversions
> tamer@office ~ $ sudo modinfo
> /lib/modules/3.3.8-gentoo/kernel/drivers/net/wan/wanrouter.ko
>
>
> tamer@office ~ $ sudo modinfo
> /lib/modules/3.3.8-gentoo/kernel/net/wanrouter/wanrouter.ko
> filename: /lib/modules/3.3.8-gentoo/kernel/net/wanrouter/wanrouter.ko
> license: GPL
> description: Sangoma WANPIPE: Proc & User Interface
> author: Nenad Corbic <ncor...@sangoma.com>
> depends: sdladrv
> vermagic: 3.3.8-gentoo SMP mod_unload modversions
>
>
> tamer@office ~ $ sudo modprobe sdladrv
> WARNING: Deprecated config file /etc/modprobe.conf, all config files
> belong into /etc/modprobe.d/.
> FATAL: Error inserting sdladrv
> (/lib/modules/3.3.8-gentoo/kernel/drivers/net/wan/sdladrv.ko): Invalid
> module format
> tamer@office ~ $ sudo modinfo
> /lib/modules/3.3.8-gentoo/kernel/drivers/net/wan/sdladrv.ko
> filename: /lib/modules/3.3.8-gentoo/kernel/drivers/net/wan/sdladrv.ko
> license: GPL
> description: Sangoma WANPIPE: HW Layer
> author: Alex Feldman <al.feld...@sangoma.com>
> depends:
> vermagic: 3.3.8-gentoo SMP mod_unload modversions
>
>
> I am running the 3.3.8 SMP kernel, and I don't know why he doesn't load
> the modules. This is what droves me crazy about it....
>
>
> any other ideas?!
>
>
>
> Tamer
>
>
> Am 20.08.2012 12:35, schrieb Hinnerk van Bruinehsen:
> > On 20.08.2012 00:44, cov...@ccs.covici.com wrote:
> >> Tamer Higazi <th9...@googlemail.com> wrote:
> >
> >>> Hi people! I have installed through the freeswitch overlay, the
> >>> wanpipe package. What I figure out, that If I "modprobe" a
> >>> driver, I recevie this error: "Invalid module format"
> >>>
> >>> here is the output:
> >>>
> >>> tamer@office ~ $ sudo modprobe wanpipe Passwort: WARNING:
> >>> Deprecated config file /etc/modprobe.conf, all config files
> >>> belong into /etc/modprobe.d/. WARNING: Error inserting wanrouter
> >>> (/lib/modules/3.3.8-gentoo/kernel/net/wanrouter/wanrouter.ko):
> >>> Invalid module format FATAL: Error inserting wanpipe
> >>> (/lib/modules/3.3.8-gentoo/kernel/drivers/net/wan/wanpipe.ko):
> >>> Invalid module format
> >>>
> >>>
> >>>
> >>> What does it have to mean? I am not getting smart.
> >
> >> Usually, it means you have compiled a module which is not the same
> >> version as your running kernel -- make sure your /usr/src/linux is
> >> set correctly.
> >
> >> Hope this helps.
> >
> >
> > You could also check for which kernel the module is compiled by
> > issuing modinfo <path-to-module>
> >
>
--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?
John Covici
cov...@ccs.covici.com
