Hello. I'm running ntpd as server on one of my machines, and it keeps
itself in sync with 6 time servers around the globe. The
synchronization works very well.
The problem is when I try to get the other machines on the network to
sync themselves with this one server. Most of them are running linux
(kernel 2.6.x), but some are still running windows.
Some machines can sync fine, and some don't. All of them can reach the
server (same network), and there is no firewall at all.
This is the output I get from ntpq on the machines that don't work:
ntpq> peers
remote refid st t when poll reach delay offset jitter
==============================================================================
timeserver 217.160.252.229 3 u 26 64 377 0.214 46927.6 716.379
ntpq> assoc
ind assID status conf reach auth condition last_event cnt
===========================================================
1 15036 9064 yes yes none reject reachable 6
The only differences between this one and another machines where it's
working fine are the status code (it varies a bit) and the condition
(instead of reject, sys.peer).
The ntp.conf for all machines have just:
server 192.168.7.1
which is the ip address of the time server in question.
I don't know the internals of ntp. What can be wrong in my configuration?
Thanks
--
Bruno Lustosa, aka Lofofora | Email: [EMAIL PROTECTED]
Network Administrator/Web Programmer | ICQ: 1406477
Rio de Janeiro - Brazil |
--
gentoo-user@gentoo.org mailing list
