[gentoo-user] SCSI Emulation Problem for USB

[Tobias]

Hi!! If i do dmesg i get scsi0 : sata_sil ... shouldnt there be the SCSI Emultation.... scsi1 : sata_sil Vendor: ATA ... thats my SATA HD ------------------------ if i do cat /proc/scsi/scsi i get: Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: HDS722580VLSA80 Rev: V32O Type: Direct-Access ANSI SCSI revision: 05 ----------- # the dmesg scsi msg sata_sil version 0.9 ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 11 ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [LNK3] -> GSI 11 (level, low) -> IRQ 11 ata1: SATA max UDMA/100 cmd 0xE08AE080 ctl 0xE08AE08A bmdma 0xE08AE000 irq 11 ata2: SATA max UDMA/100 cmd 0xE08AE0C0 ctl 0xE08AE0CA bmdma 0xE08AE008 irq 11 ata1: dev 0 cfg 49:2f00 82:74eb 83:7fea 84:4023 85:74e9 86:3c02 87:4023 88:203f ata1: dev 0 ATA, max UDMA/100, 160836480 sectors: lba48 ata1: dev 0 configured for UDMA/100 scsi0 : sata_sil ata2: no device found (phy stat 00000000) scsi1 : sata_sil Vendor: ATA Model: HDS722580VLSA80 Rev: V32O Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB) SCSI device sda: drive cache: write back SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 > Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 --------- Maybe a wrong interrupt is the problem! CPU0 0: 4724423 XT-PIC timer 1: 7103 XT-PIC i8042 2: 0 XT-PIC cascade 5: 944743 XT-PIC ehci_hcd:usb1, NVidia nForce2, skge, ICE1712, eth0 7: 5803 XT-PIC parport0 8: 0 XT-PIC rtc 9: 3 XT-PIC acpi, ohci_hcd:usb3, ohci1394 10: 0 XT-PIC MPU401 UART 11: 360076 XT-PIC ohci_hcd:usb2, libata, nvidia 12: 223166 XT-PIC i8042 14: 1200 XT-PIC ide0 15: 1870 XT-PIC ide1 NMI: 0 LOC: 4724640 ERR: 53 MIS: 0 Please help! Greetings,He4D