On Wed, May 18, 2011 at 5:57 AM, JDM <j...@arcticwolf.myzen.co.uk> wrote: > Genthinktank, > How can you determine all the available frambuffer resolutions and colour > depths on a particular host for vesafb. I normally set this through trial and > error but there must be a command to determine these? > JDM > >
HTH, Mark c2stable ~ # hwinfo --framebuffer 02: None 00.0: 11001 VESA Framebuffer [Created at bios.459] Unique ID: rdCR.u0Yr_tr7pZ7 Hardware Class: framebuffer Model: "NVIDIA GF100 Board - 10250008" Vendor: "NVIDIA Corporation" Device: "GF100 Board - 10250008" SubVendor: "NVIDIA" SubDevice: Revision: "Chip Rev" Memory Size: 14 MB Memory Range: 0xd5000000-0xd5dfffff (rw) Mode 0x0300: 640x400 (+640), 8 bits Mode 0x0301: 640x480 (+640), 8 bits Mode 0x0303: 800x600 (+800), 8 bits Mode 0x030e: 320x200 (+640), 16 bits Mode 0x030f: 320x200 (+1280), 24 bits Mode 0x0311: 640x480 (+1280), 16 bits Mode 0x0312: 640x480 (+2560), 24 bits Mode 0x0314: 800x600 (+1600), 16 bits Mode 0x0315: 800x600 (+3200), 24 bits Mode 0x0330: 320x200 (+320), 8 bits Mode 0x0331: 320x400 (+320), 8 bits Mode 0x0332: 320x400 (+640), 16 bits Mode 0x0333: 320x400 (+1280), 24 bits Mode 0x0334: 320x240 (+320), 8 bits Mode 0x0335: 320x240 (+640), 16 bits Mode 0x0336: 320x240 (+1280), 24 bits Mode 0x033d: 640x400 (+1280), 16 bits Mode 0x033e: 640x400 (+2560), 24 bits Config Status: cfg=new, avail=yes, need=no, active=unknown c2stable ~ #
