-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 01/11/11 12:52, Jörg Schaible wrote: > Jake Moe wrote: > >> On 01/11/11 04:38, Jörg Schaible wrote: >>> Hi Jake, >>> >>> Jake Moe wrote: >>> >>>> I can't seem to get audio CDs to work with my drive. Data CDs work >>>> fine, I can mount the filesystem and read them. Data and Video DVDs >>>> seem to work fine as well. But when I try to listen to an audio CD, I >>>> get the attached errors in log.bz2. I've tried using things from KsCD >>>> to cdplay; everything gives the same errors. Googling seems to indicate >>>> that there might be a problem with udev somehow, but most of those that >>>> I find have the "fix" as "update to the latest udev using apt/rpm/other >>>> binary distro package tool", which obviously won't work for Gentoo. >>>> Other solutions seem to be "update to libATA", but I'm already using >>>> that. >>>> >>>> I've gone through and tried to check anything obvious in my kernel >>>> config, but I can't see anything that'd affect it like this. Also, if I >>>> reboot into Windows (this laptop is a work computer as well), it plays >>>> and rips the same CDs just fine. >>>> >>>> Hardware is an HP EliteBook nc6930p laptop. CD/DVD drive is /dev/sr0. >>>> Controller is: >>>> >>>> 00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI >>>> Controller (rev 03) (prog-if 01 [AHCI 1.0]) >>>> Subsystem: Hewlett-Packard Company Device 30dc >>>> Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 46 >>>> I/O ports at 8118 [size=8] >>>> I/O ports at 813c [size=4] >>>> I/O ports at 8110 [size=8] >>>> I/O ports at 8138 [size=4] >>>> I/O ports at 8000 [size=32] >>>> Memory at d8426000 (32-bit, non-prefetchable) [size=2K] >>>> Capabilities: [80] MSI: Enable+ Count=1/16 Maskable- 64bit- >>>> Capabilities: [70] Power Management version 3 >>>> Capabilities: [a8] SATA HBA <?> >>>> Capabilities: [b0] PCI Advanced Features >>>> Kernel driver in use: ahci >>>> >>>> Oddly, if I open Konqueror and type in "audiocd:/", it lists the tracks, >>>> and has the FLAC, MP3, Ogg, etc folders. But it won't play or copy the >>>> files; it gives the error in error.gif. >>>> >>>> Any other info you need, please let me know. This is driving me nuts. >>> Same for me: http://forums.gentoo.org/viewtopic.php?p=6372251#6372251 >>> >>> I still have my old box around just because of this problem :-/ >>> >>> 00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA >>> AHCI Controller (prog-if 01 [AHCI 1.0]) >>> Subsystem: Acer Incorporated [ALI] Device 0198 >>> Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 64 >>> I/O ports at c880 [size=8] >>> I/O ports at c800 [size=4] >>> I/O ports at c480 [size=8] >>> I/O ports at c400 [size=4] >>> I/O ports at c080 [size=32] >>> Memory at fbcfc000 (32-bit, non-prefetchable) [size=2K] >>> Capabilities: [80] MSI: Enable+ Count=1/16 Maskable- 64bit- >>> Capabilities: [70] Power Management version 3 >>> Capabilities: [a8] SATA HBA <?> >>> Capabilities: [b0] PCI Advanced Features >>> Kernel driver in use: ahci >>> >>> When I rip a CD it typically starts to read it slow permanently down and >>> after ~ the 6th song the process is not profgressing anymore ... >>> >>> You're also running 64-bit ? >>> >>> - Jörg >> Well, mine is a bit different. > > Not convinced ;-) > >> I typically run FVWM from a SLIM logon, >> so there's no KDE or Gnome auto-anything running. I only used Konqueror >> as an example of another way of accessing the CDs that might have >> worked, but didn't. I can even stop XDM, log in from a console prompt >> with no X running, and try to play a CD with cdplay or dcd, and I'll get >> the same results. And with me, it doesn't start to work and then slow >> down; it never works. It can only read track listings, but not any of >> the music. > > As I said in the forum, I have these log entries running from a pure console > (no X started at all) even with a stopped hal. It's enough to put an audio > CD into the drive. Happens also with vanilla kernel. Since 2.6.35 I have the > message only once though, in the previous two kernels (34+35) they are > repeated permanently. > >> And no, I'm on 32-bit "stable" Gentoo, with only "unstable" packages >> being ones that don't have stable ebuilds. > > Same for me, just using 64-bit. > >> Thanks for trying, though. :-) Anyone else have any ideas? > > Me, no - unfortunately. > > - Jörg > > Jake,
Are you a member of the audio and/or plugdev group? James Wall - -- - -- No trees were harmed in the sending of this message. However, a large number of electrons were terribly inconvenienced. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.16 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iQEcBAEBAgAGBQJNLTPPAAoJEISPTA/exVD81VEH/3X/aVllDbJZ9ZnuqlKEdMC4 T1u0KS66vG7sp0E0AwWJ5/xGIemBj5dg3+o3sCcfTTy/M9p4ZBTBrsOGN2Eu9swl McrwIp7MA5Nd6d16Xpb3roADoANq85SDtylmuSIyZ23zDEOlt+qzlT+sSx+4vUn8 d9V264oKaLbqrR3EuJp08IB81mNWCXNzAafUuS0TfAC8d3KiIGon2T97nLiGaodn 4NmA+rdswVFQcoU7FfFDEMFTl6FsabY6hFPgP2UmpQbAM+/NsuYmg2f0uFMSWLJw TRTIaZ2rMGzw6Vt3vtJZA3PDBIidHVnDPqfnz0uz/vajZnJ1L4OYUfiQ3HDUA6E= =Y2Vt -----END PGP SIGNATURE-----
