Richard Watson napsal(a):
Hi - I'm getting vastly different performance results on hda (master) as
opposed to hdb (slave). Basically when my root partition mounts (/dev/hdb)
I'm warned that DMA is off, yet hdparm -i shows udma as active. Basically
/dev/hdb performance sucks ... I've bought both drives in the last few
months. The motherboard is quite old (3 years .. I think).
Any suggestions would be appreciated.
--
Thanks - Richard
=============================
/dev/hda:
Timing cached reads: 1360 MB in 2.00 seconds = 678.75 MB/sec
Timing buffered disk reads: 146 MB in 3.03 seconds = 48.22 MB/sec
/dev/hdb:
Timing cached reads: 1376 MB in 2.00 seconds = 687.42 MB/sec
Timing buffered disk reads: 10 MB in 3.51 seconds = 2.85 MB/sec
/dev/hda:
Model=Maxtor 6Y120P0, FwRev=YAR41BW0, SerialNo=Y36DHLVE
Config={ Fixed }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
BuffType=DualPortCache, BuffSize=7936kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=240121728
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5 udma6
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive conforms to: (null):
* signifies the current active mode
/dev/hdb:
Model=ST3200826A, FwRev=3.03, SerialNo=5ND0CVYX
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=unknown, BuffSize=8192kB, MaxMultSect=16, MultSect=16
CurCHS=65535/1/63, CurSects=4128705, LBA=yes, LBAsects=268435455
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=no WriteCache=enabled
Drive conforms to: device does not report version:
* signifies the current active mode
maybe they dont like each other, try to plug second hd to another
controller (hdc/hdd)
T.B.
--
gentoo-user@gentoo.org mailing list