On Sun, May 16, 2010 at 5:17 PM, Mark Knecht <markkne...@gmail.com> wrote:
> On Sun, May 16, 2010 at 5:07 PM, walt <w41...@gmail.com> wrote:
> <SNIP>
>>
>> Hm. Is this your motherboard?:
>>
>> http://usa.asus.com/product.aspx?P_ID=W7i5W4Pw4fH22Mih
>>
>> Being a geek of a certain age, I find that products with names that invoke
>> mega-dose anabolic steroids usually don't fit my lifestyle very well.
>>
>> I do better with product names that contain more sedate character strings
>> like VSOP or MOM.
>>
>> By grepping through /usr/src/linux*/MAINTAINERS I turned up quite a few
>> email addresses at intel.com, none of which seem relevant to RAID or its
>> device drivers, but a polite email asking for a link to the appropriate
>> dev might bring a polite and useful reply. That's how I connected with
>> the appropriate dev at Broadcom, who eventually fixed my ethernet driver.
>>
>
> Yes, that's the motherboard. I don't care much about the names of
> things myself. I had limited options for the new i7-980x processor at
> the time I was ordering the hardware, and I'd never done overclocking
> before (and technically still haven't) so I got it because it was an
> Asus board which I've generally had very good luck with.
>
> To be clear, the RAID I'm doing is mdadm Linux software RAID and
> nothing having to do with the on-board RAID controller. The machine
> uses the standard Linux SATA drivers, or so I think.
>
> I like the VSOP idea. :-)
>
> - Mark
>
I continue to see this problem. I booted multiple times this morning
and cannot get the system to show /dev/sde:
c2stable ~ # ls -al /dev/sd*
brw-rw---- 1 root disk 8, 0 May 24 2010 /dev/sda
brw-rw---- 1 root disk 8, 1 May 24 2010 /dev/sda1
brw-rw---- 1 root disk 8, 2 May 24 2010 /dev/sda2
brw-rw---- 1 root disk 8, 3 May 24 2010 /dev/sda3
brw-rw---- 1 root disk 8, 4 May 24 2010 /dev/sda4
brw-rw---- 1 root disk 8, 5 May 24 2010 /dev/sda5
brw-rw---- 1 root disk 8, 6 May 24 2010 /dev/sda6
brw-rw---- 1 root disk 8, 16 May 24 2010 /dev/sdb
brw-rw---- 1 root disk 8, 17 May 24 2010 /dev/sdb1
brw-rw---- 1 root disk 8, 18 May 24 2010 /dev/sdb2
brw-rw---- 1 root disk 8, 19 May 24 2010 /dev/sdb3
brw-rw---- 1 root disk 8, 20 May 24 2010 /dev/sdb4
brw-rw---- 1 root disk 8, 21 May 24 2010 /dev/sdb5
brw-rw---- 1 root disk 8, 22 May 24 2010 /dev/sdb6
brw-rw---- 1 root disk 8, 32 May 24 2010 /dev/sdc
brw-rw---- 1 root disk 8, 33 May 24 2010 /dev/sdc1
brw-rw---- 1 root disk 8, 34 May 24 2010 /dev/sdc2
brw-rw---- 1 root disk 8, 35 May 24 2010 /dev/sdc3
brw-rw---- 1 root disk 8, 36 May 24 2010 /dev/sdc4
brw-rw---- 1 root disk 8, 37 May 24 2010 /dev/sdc5
brw-rw---- 1 root disk 8, 38 May 24 2010 /dev/sdc6
brw-rw---- 1 root disk 8, 48 May 24 2010 /dev/sdd
brw-rw---- 1 root disk 8, 49 May 24 2010 /dev/sdd1
c2stable ~ #
sda, sdb & sdc are RAID1 partition drives. sdd & sde are RAID0. As sde
is not seen the RAID0 cannot be started.
I have rebooted mutiple times. BIOS says the drives are there and are
functional, at least as far as SMART data is concerned.
This is vanilla-sources as a few weeks ago anyway there wasn't yet the
right gentoo-sources to support my video card. That has probably
changed by now so I'll try that.
c2stable ~ # uname -a
Linux c2stable 2.6.34-rc5 #1 SMP PREEMPT Mon Apr 26 12:04:14 PDT 2010
x86_64 Intel(R) Core(TM) i7 CPU X 980 @ 3.33GHz GenuineIntel GNU/Linux
c2stable ~ #
Is there a known reason to try a newer udev?
c2stable ~ # emerge -pv udev
These are the packages that would be merged, in order:
Calculating dependencies... done!
[ebuild R ] sys-fs/udev-149 USE="devfs-compat extras (-selinux) -test" 0 kB
Total: 1 package (1 reinstall), Size of downloads: 0 kB
c2stable ~ # eix -I udev
[I] sys-fs/udev
Available versions: 114 115-r1 119 124-r1 124-r2 141 ~141-r1
~145!t ~145-r1!t ~145-r2!t ~145-r3!t ~146!t 146-r1!t ~146-r2!t
~146-r3!t ~147-r1!t 149 ~150-r1!t ~151-r1 ~151-r2 ~151-r3 ~151-r4 ~154
**9999 {(+)devfs-compat (-)extras (+)old-hd-rules selinux test}
Installed versions: 149(10:28:59 05/05/10)(devfs-compat extras
-selinux -test)
Homepage:
http://www.kernel.org/pub/linux/utils/kernel/hotplug/udev.html
Description: Linux dynamic and persistent device naming
support (aka userspace devfs)
c2stable ~ #
I note in the info at the very end there are daemons for device-mapper
and udev-mount that are not running. Would they be involuved in this
problem?
Anyone who can give some guidance, please do.
Thanks,
Mark
c2stable ~ # lspci
00:00.0 Host bridge: Intel Corporation X58 I/O Hub to ESI Port (rev 13)
00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI
Express Root Port 1 (rev 13)
00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI
Express Root Port 3 (rev 13)
00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI
Express Root Port 7 (rev 13)
00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management
Registers (rev 13)
00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch
Pad Registers (rev 13)
00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status
and RAS Registers (rev 13)
00:14.3 PIC: Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers (rev 13)
00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #4
00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #5
00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #6
00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2
EHCI Controller #2
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD
Audio Controller
00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 1
00:1c.2 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 3
00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 5
00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 6
00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #1
00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #2
00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #3
00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2
EHCI Controller #1
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller
00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port
SATA IDE Controller
00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port
SATA IDE Controller
03:00.0 VGA compatible controller: ATI Technologies Inc Device 68b8
03:00.1 Audio device: ATI Technologies Inc Device aa58
04:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056
PCI-E Gigabit Ethernet Controller (rev 12)
05:00.0 SATA controller: JMicron Technology Corp. 20360/20363 Serial
ATA Controller (rev 03)
05:00.1 IDE interface: JMicron Technology Corp. 20360/20363 Serial ATA
Controller (rev 03)
06:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056
PCI-E Gigabit Ethernet Controller (rev 12)
08:02.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306 Fire II
IEEE 1394 OHCI Link Layer Controller (rev c0)
c2stable ~ #
c2stable ~ # lsmod
Module Size Used by
vmnet 30969 13
parport_pc 18434 0
parport 22905 1 parport_pc
vmblock 10230 1
vsock 34429 0
vmci 47148 1 vsock
vmmon 66467 0
ipv6 227547 32
snd_hda_codec_atihdmi 2415 1
snd_hda_codec_analog 71417 1
snd_hda_intel 21033 2
snd_hda_codec 71485 3
snd_hda_codec_atihdmi,snd_hda_codec_analog,snd_hda_intel
snd_hwdep 5562 1 snd_hda_codec
snd_pcm 73356 2 snd_hda_intel,snd_hda_codec
radeon 693168 2
ttm 50826 1 radeon
drm_kms_helper 25564 1 radeon
snd_timer 18282 1 snd_pcm
drm 177490 4 radeon,ttm,drm_kms_helper
agpgart 33073 2 ttm,drm
i2c_algo_bit 4896 1 radeon
snd 57168 10
snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
rtc_cmos 8375 0
i2c_i801 7217 0
cfbcopyarea 3249 1 radeon
cfbimgblt 2122 1 radeon
cfbfillrect 3261 1 radeon
soundcore 6779 1 snd
sky2 44504 0
snd_page_alloc 7396 2 snd_hda_intel,snd_pcm
c2stable ~ #
c2stable ~ # emerge --info
Portage 2.2_rc67 (default/linux/amd64/10.0, gcc-4.3.4,
glibc-2.10.1-r1, 2.6.34-rc5 x86_64)
=================================================================
System uname:
linux-2.6.34-rc5-x86_64-intel-r-_core-tm-_i7_cpu_x_9...@_3.33ghz-with-gentoo-1.12.13
Timestamp of tree: Fri, 21 May 2010 13:45:01 +0000
app-shells/bash: 4.0_p37
dev-java/java-config: 2.1.10
dev-lang/python: 2.6.4-r1
dev-util/cmake: 2.6.4-r3
sys-apps/baselayout: 1.12.13
sys-apps/sandbox: 2.2
sys-devel/autoconf: 2.13, 2.63-r1
sys-devel/automake: 1.8.5-r4, 1.9.6-r3, 1.10.3, 1.11.1
sys-devel/binutils: 2.18-r3
sys-devel/gcc: 4.3.4
sys-devel/gcc-config: 1.4.1
sys-devel/libtool: 2.2.6b
virtual/os-headers: 2.6.30-r1
ACCEPT_KEYWORDS="amd64"
ACCEPT_LICENSE="* -...@eula dlj-1.1 PUEL"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-O2 -march=native -pipe"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/share/X11/xkb /usr/share/config"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d
/etc/env.d/java/ /etc/fonts/fonts.conf /etc/gconf /etc/revdep-rebuild
/etc/sandbox.d /etc/terminfo /etc/texmf/language.dat.d
/etc/texmf/language.def.d /etc/texmf/updmap.d /etc/texmf/web2c"
CXXFLAGS="-O2 -march=native -pipe"
DISTDIR="/usr/portage/distfiles"
EMERGE_DEFAULT_OPTS="--with-bdeps y"
FEATURES="assume-digests distlocks fixpackages news parallel-fetch
preserve-libs protect-owned sandbox sfperms strict unmerge-logs
unmerge-orphans userfetch"
GENTOO_MIRRORS="http://gentoo.osuosl.org/ "
LDFLAGS="-Wl,-O1"
LINGUAS="en"
MAKEOPTS="-j13"
PKGDIR="/usr/portage/packages"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times
--compress --force --whole-file --delete --stats --timeout=180
--exclude=/distfiles --exclude=/local --exclude=/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
PORTDIR_OVERLAY="/usr/local/portage/layman/pentoo"
SYNC="rsync://rsync.namerica.gentoo.org/gentoo-portage"
USE="X acl amd64 berkdb bzip2 cli cracklib crypt cxx dbus dri fortran
gdbm gnome gpm gstreamer iconv kde mmx modules mudflap multilib
ncurses nls nptl nptlonly openmp pam pcre perl pngi policykit pppd
python qt3support qt4 readline reflection session spl sse sse2 ssl
sysfs tcpd unicode xorg zlib" ALSA_CARDS="intel-hda hda-intel"
ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty
extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul
mulaw multi null plug rate route share shm softvol"
APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon
authn_dbm authn_default authn_file authz_dbm authz_default
authz_groupfile authz_host authz_owner authz_user autoindex cache dav
dav_fs dav_lock deflate dir disk_cache env expires ext_filter
file_cache filter headers include info log_config logio mem_cache mime
mime_magic negotiation rewrite setenvif speling status unique_id
userdir usertrack vhost_alias" ELIBC="glibc" INPUT_DEVICES="evdev
mouse keyboard" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633
glk hd44780 lb216 lcdm001 mtxorb ncurses text" LINGUAS="en"
RUBY_TARGETS="ruby18" USERLAND="GNU" VIDEO_CARDS="radeon fbdev vmware"
XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset
ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat
logmark ipmark dhcpmac delude chaos account"
Unset: CPPFLAGS, CTARGET, FFLAGS, INSTALL_MASK, LANG, LC_ALL,
PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS
c2stable ~ #
c2stable ~ # rc-update show --verbose
alsasound |
bootmisc | boot
checkfs | boot
checkroot | boot
clock | boot
consolefont | boot
consolekit |
crypto-loop |
dbus | default
device-mapper |
dmcrypt |
dmeventd |
fuse |
gpm |
hald |
hdparm |
hostname | boot
keymaps | boot
local | default nonetwork
localmount | boot
lvm |
mdadm |
mdraid |
modules | boot
mysql |
mysqlmanager |
net.eth0 | default
net.lo | boot
netmount | default
nscd |
ntp-client | default
ntpd | default
numlock |
pciparm |
pwcheck |
pydoc-2.6 |
rmnologin | boot
rsyncd |
saslauthd |
slpd |
smartd |
sshd | default
svnserve |
syslog-ng | default
udev |
udev-dev-tarball |
udev-mount |
udev-postmount | default
urandom | boot
vixie-cron | default
vmware | default
xdm | default
xdm-setup |
c2stable ~ #
