On Thu, Apr 8, 2010 at 1:18 AM, Gregory Shearman <zek...@gmail.com> wrote:
> In linux.gentoo.user, you wrote:
>
> GentooPenguin# /usr/sbin/lspci | grep Radeon
>
> 01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon
> Xpress 200M]
>
Yesssir!
o_0 tony # lspci | grep Radeon
01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon
Xpress 200M]
> Are you sure your opengl libraries are being found in /usr/lib/opengl?
Maybe we could compare this information:
o_0 opengl # ls -lh /usr/lib/opengl/xorg-x11/lib/
total 352K
lrwxrwxrwx 1 root root 10 2010-04-08 02:46 libGL.so -> libGL.so.1
lrwxrwxrwx 1 root root 12 2010-04-08 02:46 libGL.so.1 -> libGL.so.1.2
-rwxr-xr-x 1 root root 345K 2010-04-08 02:45 libGL.so.1.2
o_0 opengl # ldd /usr/lib/opengl/xorg-x11/lib/libGL.so.1.2
linux-gate.so.1 => (0xb7851000)
libXext.so.6 => /usr/lib/libXext.so.6 (0xb77ce000)
libXxf86vm.so.1 => /usr/lib/libXxf86vm.so.1 (0xb77c8000)
libXdamage.so.1 => /usr/lib/libXdamage.so.1 (0xb77c4000)
libXfixes.so.3 => /usr/lib/libXfixes.so.3 (0xb77be000)
libX11-xcb.so.1 => /opt/gfx-test/lib/libX11-xcb.so.1 (0xb77ba000)
libX11.so.6 => /opt/gfx-test/lib/libX11.so.6 (0xb769d000)
libxcb-glx.so.0 => /usr/lib/libxcb-glx.so.0 (0xb768a000)
libxcb.so.1 => /usr/lib/libxcb.so.1 (0xb766f000)
libdrm.so.2 => /opt/gfx-test/lib/libdrm.so.2 (0xb7664000)
libm.so.6 => /lib/libm.so.6 (0xb763e000)
libpthread.so.0 => /lib/libpthread.so.0 (0xb7624000)
libdl.so.2 => /lib/libdl.so.2 (0xb7620000)
libc.so.6 => /lib/libc.so.6 (0xb74d8000)
libXau.so.6 => /usr/lib/libXau.so.6 (0xb74d4000)
libXdmcp.so.6 => /usr/lib/libXdmcp.so.6 (0xb74ce000)
librt.so.1 => /lib/librt.so.1 (0xb74c4000)
/lib/ld-linux.so.2 (0xb7852000)
o_0 opengl # ls -lh /usr/lib/opengl/xorg-x11/extensions/
total 388K
-rwxr-xr-x 1 root root 14K 2010-04-05 18:13 libdri2.so
-rwxr-xr-x 1 root root 38K 2010-04-05 18:13 libdri.so
-rwxr-xr-x 1 root root 327K 2010-04-05 18:13 libglx.so
o_0 opengl # ldd /usr/lib/opengl/xorg-x11/extensions/libdri2.so
linux-gate.so.1 => (0xb7837000)
libdrm.so.2 => /opt/gfx-test/lib/libdrm.so.2 (0xb780c000)
libm.so.6 => /lib/libm.so.6 (0xb77e6000)
librt.so.1 => /lib/librt.so.1 (0xb77dd000)
libc.so.6 => /lib/libc.so.6 (0xb7695000)
/lib/ld-linux.so.2 (0xb7838000)
libpthread.so.0 => /lib/libpthread.so.0 (0xb767b000)
o_0 opengl # ldd /usr/lib/opengl/xorg-x11/extensions/libdri.so
linux-gate.so.1 => (0xb773b000)
libdrm.so.2 => /opt/gfx-test/lib/libdrm.so.2 (0xb770b000)
libm.so.6 => /lib/libm.so.6 (0xb76e5000)
librt.so.1 => /lib/librt.so.1 (0xb76dc000)
libc.so.6 => /lib/libc.so.6 (0xb7594000)
/lib/ld-linux.so.2 (0xb773c000)
libpthread.so.0 => /lib/libpthread.so.0 (0xb757a000)
o_0 opengl # ldd /usr/lib/opengl/xorg-x11/extensions/libglx.so
linux-gate.so.1 => (0xb78a2000)
libm.so.6 => /lib/libm.so.6 (0xb780e000)
librt.so.1 => /lib/librt.so.1 (0xb7805000)
libc.so.6 => /lib/libc.so.6 (0xb76bd000)
/lib/ld-linux.so.2 (0xb78a3000)
libpthread.so.0 => /lib/libpthread.so.0 (0xb76a4000)
I also see a lot of lines like this in my Xorg.log, any particular one
I should look out for?
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
> What does the command "eselect opengl list" show you?
>
> Mine tells me that the xorg-x11 driver is being used.
>
o_0 tony # eselect opengl list
Available OpenGL implementations:
[1] xorg-x11 *
>> But glxgears only gets about 19 fps. Here is what glxinfo | grep OpenGL
>> reports:
>
> I get:
>
> 1438 frames in 5.0 seconds = 287.483 FPS
>
> Not really screaming along, but adequate for my needs.
That would be good enough for me as well. :)
>
>> Section "Module"
>> Load "record"
>> Load "extmod"
>> Load "dri"
>> Load "glx"
>> Load "GLcore"
>> Load "dri2"
>> Load "dbe"
>> EndSection
>
> My xorg.conf shows:
>
> Section "Module"
> Load "extmod"
> Load "dri"
> Load "dbe"
> Load "record"
> Load "xtrap"
> Load "glx"
> EndSection
>
>> Section "Device"
>> ### Available Driver options are:-
>> ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
>> ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
>> ### [arg]: arg optional
>> #Option "ShadowFB" # [<bool>]
>> #Option "DefaultRefresh" # [<bool>]
>> #Option "ModeSetClearScreen" # [<bool>]
>> Identifier "Card0"
>> Driver "radeon"
>> VendorName "ATI Technologies Inc"
>> BoardName "RC410 [Radeon Xpress 200M]"
>> BusID "PCI:1:5:0"
>> Option "MergedFB" "true"
>> Option "CRT2Position" "LeftOf"
>> Option "ColorTiling" "true"
>> Option "EnablePageFlip" "true"
>> #Option "AccelMethod" "EXA"
>> #Option "AccelDFS" "true"
>> EndSection
>
> My Device Section:
>
> Section "Device"
> Identifier "ATI Graphics Adapter 0"
> Driver "radeon"
> Option "AccelMethod" "EXA"
> BusID "PCI:1:5:0"
> EndSection
>
I tried copying yours. It all worked except it couldn't find the 'xtrap' module.
Didn't make a difference though. Still have no accelerated rendering
and nothing in /dev/dri.
What does glxinfo | grep render say for you?
