Am Dienstag 21 Juni 2005 21:30 schrieb Zac Medico: > Christian Herzyk wrote: > > Hello all, > > > > I cannot write CDs anymore. > > The only thing i changed lately was an upgrade to cdrtools-2.01-r3 from > > r2 some days ago. Now nearly all attempts to burn an audio CD end with an > > error. After some of the mistakes (using k3b) I searched the forum and > > found some postings on problems writing CDs as normal user. > > So I tried the ck-sources (2.6.11_p10) as these were said to have a > > patch, no change. The last thing I tried was using cdrecord as root (both > > with the ck-sources and the gentoo-sources-2.6.11), but I still get > > errors like the following: > > > > Track 01: Total bytes read/written: 45236016/45236016 (19233 sectors). > > Track 02: Total bytes read/written: 57692208/57692208 (24529 sectors). > > cdrecord: Success. write_g1: scsi sendcmd: no error > > CDB: 2A 00 00 00 DD CF 00 00 1B 00 > > status: 0x2 (CHECK CONDITION) > > Sense Bytes: 70 00 03 00 00 00 00 10 20 31 00 80 02 00 00 00 > > Sense Key: 0x3 Medium Error, Segment 0 > > Sense Code: 0x02 Qual 0x00 (no seek complete) Fru 0x0 > > Sense flags: Blk 0 (not valid) > > resid: 63504 > > cmd finished after 5.457s timeout 40s > > write track data: error after 29910384 bytes > > cdrecord: A write error occured. > > cdrecord: Please properly read the error message above. > > cdrecord: Success. close track/session: scsi sendcmd: no error > > CDB: 5B 00 02 00 00 00 00 00 00 00 > > status: 0x2 (CHECK CONDITION) > > Sense Bytes: 70 00 03 00 00 00 00 10 20 3B 00 80 02 00 00 00 > > Sense Key: 0x3 Medium Error, Segment 0 > > Sense Code: 0x02 Qual 0x00 (no seek complete) Fru 0x0 > > Sense flags: Blk 0 (not valid) > > cmd finished after 4.906s timeout 480s > > cmd finished after 4.906s timeout 480s > > cdrecord: Cannot fixate disk. > > > > I even tried different media types, all of them were used before without > > any problems (I think I lost only 2 CD-Rs in over 2 years) so I would say > > it is not any bad media. > > What makes me wonder is that once I could finish writing a CD-R and once > > with an CD-RW (using k3b as user) the other ~8 tries were failures. > > > > Any hints what could be the problems? > > > > Thanks a lot > > > > Christian > > Have you reverted back to cdrtools-2.01-r2? I'm currently using > cdrtools-2.01.01_alpha01-r2 with no problems. > > Zac
Hi Zac, as cdrtools-2.01-r2 is no longer in portage I tried upgrading to 2.01.01_alpha01-r2. I still get the same error: Track 08: 1 of 50 MB written (fifo 100%) [buf 89%] 24.5x.cdrecord: Success. write_g1: scsi sendcmd: no error CDB: 2A 00 00 02 4C 7F 00 00 1B 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 03 00 00 00 00 10 20 3B 00 80 02 00 00 00 Sense Key: 0x3 Medium Error, Segment 0 Sense Code: 0x02 Qual 0x00 (no seek complete) Fru 0x0 Sense flags: Blk 0 (not valid) resid: 63504 cmd finished after 5.316s timeout 40s write track data: error after 1143072 bytes cdrecord: A write error occured. I get the same error after downgrading to 2.01-r1. Any other hints? Christian -- gentoo-user@gentoo.org mailing list
